Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Studying trivalent/bivalent metal ion doped TiO2 as p-TiO2 in bipolar heterojunction devices

Trivalent/bivalent metal ions doped TiO₂ thin films (M_xTi_1−xO₂, M = Cr³⁺, Fe³⁺, Ni²⁺, Co²⁺, Mn²⁺ and x = 0.01, 0.05, 0.1, 0.15, 0.2) were deposited on Indium–tin oxide (ITO) coated glass substrates by spin coating technique. X-ray photoelectron spectroscopy (XPS) showed Ti⁴⁺ oxidation state of the Ti2p band in the doped p-TiO₂. The homogenous M_xTi_1−xO₂ was used to support n-ZnO thin films with thickness ∼40–80 nm and vertically aligned n-ZnO nanorods (NR) with length ∼300 nm and 1.5 μm. Current (I)–voltage (V) characteristics for the Ag/n-ZnO/M_xTi_1−xO₂/ITO/glass assembly showed rectifying behavior with small turn-on voltages (V₀) < 1 V. The ideality factor (η) and the resistances in both forward and reverse bias were calculated. The temperature dependence performance of these bipolar devices was performed and variation of the parameters with temperature was studied.     

Localized in situ polymerization on graphene surfaces for stabilized graphene dispersions

We demonstrate a novel in situ polymerization technique to develop localized polymer coatings on the surface of dispersed pristine graphene sheets. Graphene sheets show great promise as strong, conductive fillers in polymer nanocomposites; however, difficulties in dispersion quality and interfacial strength between filler and matrix have been a persistent problem for graphene-based nanocomposites, particularly for pristine graphene. With this in mind, a physisorbed polymer layer is used to stabilize graphene sheets in solution. To create this protective layer, we formed an organic microenvironment around dispersed graphene sheets in surfactant solutions, and created a nylon 6, 10 or nylon 6, 6 coating via interfacial polymerization. Technique lies at the intersection of emulsion and admicellar polymerization; a similar technique was originally developed to protect luminescent properties of carbon nanotubes in solution. These coated graphene dispersions are aggregation-resistant and may be reversibly redispersed in water even after freeze-drying. The coated graphene holds promise for a number of applications, including multifunctional graphene-polymer nanocomposites.     

Macro-to-micro porous special bioactive glass and ceftriaxone-sulbactam composite drug delivery system for treatment of chronic osteomyelitis: an investigation through in vitro and in vivo animal trial

A systematic and extensive approach incorporating in vitro and in vivo experimentation to treat chronic osteomyelitis in animal model were made using antibiotic loaded special bioactive glass porous scaffolds. After thorough characterization for porosity, distribution, surface charge, a novel drug composite were infiltrated by using vacuum infiltration and freeze-drying method which was subsequently analyzed by SEM-EDAX and studied for in vitro drug elution in PBS and SBF. Osteomyelitis in rabbit was induced by inoculation of Staphylococcus aureus and optimum drug-scaffold were checked for its efficacy over control and parenteral treated animals in terms of histopathology, radiology, in vivo drug concentration in bone and serum and implant-bone interface by SEM. It was optimized that 60P samples with 60-65% porosity (bimodal distribution of macro- to micropore) with average pore size ~60 μm and higher interconnectivity, moderately high antibiotic adsorption efficiency (~49%) was ideal. Results after 42 days showed antibiotic released higher than MIC against S. aureus compared to parenteral treatment (2 injections a day for 6 weeks). In vivo drug pharmacokinetics and SEM on bone-defect interface proved superiority of CFS loaded porous bioactive glass implants over parenteral group based on infection eradication and new bone formation.     

Standard potentials of the silver-silver iodide electrode in aqueous mixtures of ethanol and propan-2-ol at different temperatures. Free energies and entropies of transfer of hydroiodic acid at 25°

Standard potentials of E^θ of the silver-silver iodide electrode in ethanol + water and propan-2-ol + water mixtures have been determined from the emf of the cell Pt, H₂ (g, 1 atm)|HI(itm), solvent| Agl-Ag at seven temperatures ranging from 10 to 40° for ethanol and from 5 to 35° for propan-2-ol. Free energies ΔS^gq_itt of transfer HI obtained therefrom have been briefly discussed in the light of ion-solvent interactions and solvent structure.     

Ion-solvent interaction from viscosity and apparent molar volume of bromates,iodates and sulphates of potassium and sodium in dioxane-water mixtures at different temperatures

The viscosity and apparent molar volume of solutions of KBrO₃, NaBrO₃ KIO₃, NaIO₃, K₂SO₄ and Na₂SO₄ in dioxane (mass fraction: 10, 20 and 30%)-water mixtures at 30, 35, 40 and 45°C have been measured. The ions appear to interact appreciably and the ion-solvent interaction is of the order BrO^?₃ > IO^?₃ > SO^2?₄ and K⁺ > Na⁺.     

Fourier transform infrared spectroscopic studies of the poly(styrene-co-acrylonitrile) and poly (vinyl chloride-co-vinyl acetate) blends

The Fourier transform infrared (FTIR) spectroscopic studies of the poly-(styrene-co-acrylonitrile) (SAN) and poly(vinyl chloride-co-vinyl acetate) (VYHH) blends produced by different blending techniques, viz., solution blending, melt-blending, and also the co-precipitation methods of blending, were performed. In the case of miscible blend systems, substantial band shiftings took place, whereas immiscible blend systems showed slight or no band shifting. The miscible blends showed a substantial residual spectrum which was absent in the case of the immiscible system when a similar subtraction process was carried out. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 991–1000, 1997     

Aspects of poly(p-phenylene sulfide) degradation and stabilization. Part 1. Influence of polymer end groups on exposure induced coloration

In this paper we reviewed some of our work on the photo induced coloration of Poly(p-phenylene sulfide) (PPS) and compared it to recent results obtained from the thermal treatment of resins that varied in molecular weight and ionic content. The results from this study suggest that coloration of amorphous PPS films after UV irradiation is caused by products different from those that cause coloration in semicrystalline PPS after thermoxidation. In addition, we found that polymer end group chemistry and resin molecular weights play important roles in the thermoxidative coloration of PPS, but only nominally influence the photooxidative coloration of the resin. PPS coloration may arise from the accumulation of specific, colored products (e.g., phenyl-phenyl moieties) and the possible presence of intermolecular aggregates. The mechanism and extent by which these structures occur in UV irradiated or heated PPS are likely dependent upon the polymer morphology of the samples tested.     

Detection and analysis of transition from annular to intermittent flow in vertical tubes

In vertical co-current gas-liquid flow, the transition from annular to intermittent flow occurs when gas core becomes interrupted by liquid bridges due to the instability of the interfacial capillary waves. An analytical model is formulated to explain the liquid bridging in terms of the growth of finite amplitude interfacial capillary waves. Experimental results show that the longest wave length, which is associated with the transition, is about eight times the wave length of waves moving with the velocity of the liquid film.