Mode I Fracture Resistance of a Laminated Fiber-Reinforced Ceramic

The mode I fracture resistance of a ceramic matrix composite has been measured. Simultaneous observations have revealed that the resistance is dominated by frictional dissipation upon the pullout of fibers that fracture in the crack wake off the crack plane. Numerical and analytical crack growth simulations have been compared with the experimental results. One important feature in this comparison concerns the occurrence of large-scale bridging. With these effects taken into account, the simulations and the experiments are found to be in good correspondence for acceptable magnitudes of the interface sliding stress.     

Effects of branching upon some surfactant properties of sulfated alcohols

A study was undertaken to determine the surfactant properties of various sulfated alcohols. Most notably, the Krafft point and the ability to emulsify decane were studied. A series of sulfated Guerbet alcohol and Guerbet alcohol alkoxylate sulfates with 16 carbon atoms and an analogous series based upon cetyl alcohol, a linear C₁₆, were studied as hydrophobes.     

Structure and conductivity of multi-walled carbon nanotube/poly(3-hexylthiophene) composite films

This work reports a structure-property investigation of a conjugated polymer nanocomposite with enhanced conductivity. Regioregular poly(3-hexylthiophene) (rrP3HT) was used to prepare composites with thin, short, multi-walled carbon nanotube (MWNT) addition over a wide range of concentrations. Scanning and transmission electron microscopies demonstrated an excellent dispersion and good wetting properties within the carbon nanotube composites. Coated MWNTs showed superstructures of P3HT self-organized on nanotube surfaces. Changes in the long range order and on the self-ordered mesophase of the bulk material were investigated by infrared and Raman spectroscopies, differential scanning calorimetry and X-ray diffraction. Interplay between charge transport through the semiconducting polymer and carbon nanotube network increased the composite's conductivity after percolation to values close to 10⁻² S cm⁻¹.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

A comparison of the ethoxylation of a fatty alcohol,fatty acid,and dimethiconol

Knowing that dimethiconols or silanols condense under acid or alkaline catalysis, a study was undertaken to determine if these compounds could be successfully ethoxylated under conditions similar to those used to ethoxylate fatty alcohols and acids. It was anticipated that the condensation reaction would take precedent over ethoxylation reaction. We determined that ethoxylation reaction occurs preferentially to condensation reaction. In addition, kinetics of ethoxylation are similar to kinetics observed when fatty alcohols are ethoxylated. This reaction gives rise to a new class of hydrolyzable silicone compounds that have applications in industrial as well as in personal-care products.     

Mesoporous silica with short-range MFI structure

A new type of mesoporous silica has been prepared which showed 780 m²/g of BET surface area and 0.6 ml/g of primary mesopores narrowly distributed around 4.2 nm. More importantly however, is that it showed short-range zeolite crystallinity as demonstrated by FTIR and XRD analysis, and hydrophobicity as demonstrated by water and n-hexane adsorption.

This material was synthesized via a dual-template, three-step hydrothermal–flocculation–steaming synthesis procedure developed by us recently. Briefly, MFI nanoprecursors (NPs) were first prepared by a low-temperature hydrothermal step using TPAOH as template for zeolite structure, and then flocculated using a surfactant that served as the template for the mesopores. The collected NPs are mesoporous silica exhibiting short-range MFI domains when directly calcined. However, the steaming step promoted the crystallization of the NPs and created uniform mesopores. It was found that almost every detail in these procedures affected the properties of the final product. The most important variables, however, were identified as the duration the flocculants were kept in contact with the liquid phase, and the humidity under which the steaming was conducted. By properly adjusting the procedures, the said mesoporous silica, as well as nanocrystals having high external surface area, could be produced at will.     

A modified model and algorithm for flow‐enhanced crystallization—Application to fiber spinning

The graft copolymerization of acrylamide (AAm) monomer onto polyethylene‐coated polypropylene (PE‐co‐PP) nonwoven fabric was carried out by the mutual irradiation method. The general peculiarities of the grafting have been studied by gravimetric, scanning electron microscope (SEM), mechanical properties, and Fourier transform infrared (FTIR) methods. The influence of absorbed dose, dose rate, as well as the monomer concentration on the degree of grafting has been determined. Metal ions uptake of Cu²⁺, Co²⁺, Ni²⁺ by the grafted fabrics was evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3240–3245, 2006     

Enantiospecific synthesis fromd-fructose of (2S,5R)- and (2R,5R)-2-methyl-1,6-dioxaspiro[4.5]decane [the odor bouquet minor components ofParavespula vulgaris (L.)]

The synthesis of (2S,5R)-(1) and (2R,5R)-2-methyl-1,6-dioxaspiro [4.5]decane (2) from (2RS,5R,8R,9R,10S)-8,9,10-trihydroxy-2-methyl-1, 6-dioxaspiro[4.5]decane (8), obtained in five steps fromd-fructose using Wittig's methodology, reduction, and spiroketalation, has been accomplished by a Corey dideoxygenation at C-8,9, followed by a Barton deoxygenation at C-10, of the appropriately protected derivatives.Enantiospecific synthesis of spirocetals. Part V. For Part IV, see Izquierdo et al. (1992).     

Classification of time series by shapelet transformation

Time-series classification (TSC) problems present a specific challenge for classification algorithms: how to measure similarity between series. A shapelet is a time-series subsequence that allows for TSC based on local, phase-independent similarity in shape. Shapelet-based classification uses the similarity between a shapelet and a series as a discriminatory feature. One benefit of the shapelet approach is that shapelets are comprehensible, and can offer insight into the problem domain. The original shapelet-based classifier embeds the shapelet-discovery algorithm in a decision tree, and uses information gain to assess the quality of candidates, finding a new shapelet at each node of the tree through an enumerative search. Subsequent research has focused mainly on techniques to speed up the search. We examine how best to use the shapelet primitive to construct classifiers. We propose a single-scan shapelet algorithm that finds the best $k$ shapelets, which are used to produce a transformed dataset, where each of the $k$ features represent the distance between a time series and a shapelet. The primary advantages over the embedded approach are that the transformed data can be used in conjunction with any classifier, and that there is no recursive search for shapelets. We demonstrate that the transformed data, in conjunction with more complex classifiers, gives greater accuracy than the embedded shapelet tree. We also evaluate three similarity measures that produce equivalent results to information gain in less time. Finally, we show that by conducting post-transform clustering of shapelets, we can enhance the interpretability of the transformed data. We conduct our experiments on 29 datasets: 17 from the UCR repository, and 12 we provide ourselves.