Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing

Ultra-high performance concrete (UHPC) and ultra-high performance fiber reinforced concrete (UHP-FRC) were introduced in the mid 1990s. Special treatment, such as heat curing, pressure and/or extensive vibration, is often required in order to achieve compressive strengths in excess of 150 MPa (22 ksi). This study focuses on the development of UHP-FRCs without any special treatment and utilizing materials that are commercially available on the US market. Enhanced performance was accomplished by optimizing the packing density of the cementitious matrix, using very high strength steel fibers, tailoring the geometry of the fibers and optimizing the matrix-fiber interface properties. It is shown that addition of 1.5% deformed fibers by volume results in a direct tensile strength of 13 MPa, which is 60% higher than comparable UHP-FRC with smooth steel fibers, and a tensile strain at peak stress of 0.6%, which is about three times that for UHP-FRC with smooth fibers. Compressive strength up to 292 MPa (42 ksi), tensile strength up to 37 MPa (5.4 ksi) and strain at peak stress up to 1.1% were also attained 28 days after casting by using up to 8% volume fraction of high strength steel fibers and infiltrating them with the UHPC matrix.     

Jet Mixing in Direct-Chill Casting of Aluminum: Crater Effects and its Consequence on Centerline Segregation

Recent reports have demonstrated the possibility of mitigating macrosegregation during the Direct-Chill casting of rolling slab ingots using an impinging jet. Herein, an analytical model is presented to predict the shape of the crater formed due to the impact of the jet on the slurry region. The model takes into account alloy composition, physical dimension, and casting speed on the distribution of forces and crater shape. The calculated shape of the crater profile is used to explain the centerline depletion in the impingement region previously reported.     

Life Gallery: event detection in a personal media collection

Multimedia Tools and Applications - Usage of camera-equipped mobile devices raises the need for automatically organizing large personal media collections. Event detection algorithms have been...     

Interfacial bonding of Flax fibre/Poly(l-lactide) bio-composites

The use of glass fibre reinforced polyester composites raises many health and safety and environmental questions. One alternative is the development of high performance bio-based bio-composites with low environmental impact. Improved understanding of interfacial properties is essential to optimise the mechanical properties and durability of these materials, but so far few data are available. The present work describes the interfacial characterization of Flax fibre/Poly(lactic) acid (PLLA) system at the micro-scale using the microbond test. Different thermal treatments have been carried out (cooling rate and annealing) in order to evaluate the influence of matrix and interfacial morphologies as well as residual stress on interfacial properties. Micromechanical models have been used to determine the interfacial shear strength. When cooling rate is slow, improved interfacial properties are observed.     

Post-yield response of cold-cambered wide flange steel beams

The post-yield response of steel beams is important in steel fabrication particularly for setting cambers. A commonly used cambering process known as “cold cambering” consists of bending the girder about its strong axis using single or dual symmetrically applied concentrated loads. This paper recasts available solutions for wide flange steel beams relating loads to permanent deformation in parametric form to determine the effect of cross-sectional geometry and load position on its post-yield response. Sensitivity analyses were then conducted to identify appropriate values of these key parameters and their impact on alternative cambering set-ups. This allows optimization of the cold cambering operation for single- and dual-load systems. The analysis shows that dual-load systems offer significant benefits over single-load systems as they develop the required camber profile at smaller loads without overstraining the steel section. The best results are obtained if the spacing between the two loads is kept within one-third to one-quarter of the span.     

Dynamic mechanical analysis of the multiple glass transitions of plasticized wheat gluten biopolymer

Glass transition of thermo‐molded biomaterials made from wheat gluten and its main protein classes is studied by dynamic mechanical analysis (DMA). The materials are plasticized with variable contents of glycerol (30–40 wt %) and water (0–20 wt %). For all materials, three successive relaxation phases are systematically detected. Their positions shift to lower temperature as the plasticizer content of materials increases. Composition in gluten, glycerol and water of each relaxation phase is estimated using the Couchman‐Karasz model. Irrespective of the plasticizer content or composition, the relaxation phases shows rather constant plasticizer volume fractions. The low‐, middle‐, and high relaxation phases include respectively around 30, 60 and 80 vol % of gluten protein. These relaxations are assigned to the segmental motion of the surface amino‐acid side groups, to the collective motion of packed gluten proteins, and to the gain in protein conformational mobility as a 2D network of interacting plasticizer molecules forms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43254.