Décodage par le treillis de codes polynomiaux: un écueil à éviter

We give a simple proof of a well known property of the maximum likelihood decoding of polynomial block codes: the systematic version of the code results in fewer decoding errors than the non systematic version. As a practical result, it is interesting to decode the systematic version of the code on the treillis of the non systematic version, because the non systematic version of the code exhibits a more regular trellis, and both version generate the same codewords.     

HERSCHEL—PACS Bolometer Arrays for Submillimeter Ground-Based Telescopes

The Herschel Space Observatory will carry onboard a new kind of bolometric architecture for the PACS (Photodetector Array Camera and Spectrometer) submillimeter photometer. These new generation CCD-like multiplexed bolometer arrays are buttable and enable the conception of large fully sampled focal planes either for space or for ground-based telescopes. We present here some development for ground-based applications in the context of the ARTEMIS (ARchitecture de bolomètres pour des TElescopes sub-MIllimétriques au Sol) project. We have developed an electro-thermal numerical model that simulates the performances of these semiconducting bolometers under specific ground-based conditions (different wavelengths and background powers for example). This model permits to determine the optimal parameters for each condition and shows that the bolometers can be background limited in each atmospheric transmission window between 200 and 450 microns. We also describe the optical system that provides a high optical efficiency in each submillimeter atmospheric window. Astronomical observations made with a prototype on the APEX telescope are presented.     

A transmission line model for arrays of rectangular microstrip antennas

A very efficient transmission line model for the analysis of arrays of rectangular microstrip antennas is presented. The structure of the model is discussed, and its validity is proved. This is done for the isolated microstrip antenna as well as for the coupling between antennas. Then follows a discussion of the numerical efficiency. And finally a numerical example shows the effect of mutual coupling on the impedance and radiation pattern of a 21 element Chebyshev array at different scanangles.     

Forecasting solar radiation – Preliminary evaluation of an approach based upon the national forecast database

Our objective is to develop, and undertake a preliminary evaluation of a simple solar radiation forecast model using sky cover predictions from the National Digital Forecast Database as an input. This report describes the model and presents a limited evaluation of its performance against ground-measured and satellite-derived irradiances in Albany, New York.     

Confocal Scanning Laser Microscopic Study of the RDX Defect Structure in Deformed Polymer‐Bonded Explosives

The influence of an explosion‐driven deformation on the defect structure in RDX crystals embedded in a polymer‐bonded explosive was investigated by means of confocal scanning laser microscopy. The images were compared to the defect structure in the as‐received RDX grades, embedded in an epoxy resin. In this way it is possible to qualitatively analyze the changes in defect structure of the RDX crystals that were induced by the explosion‐driven deformation. For the first time, these data therefore provide experimental confirmation of how shock waves mechanically interact with energetic crystals – a topic that, up to now, was only explored by means of simulations.     

Investigation of the Failure Mechanism of HTPB/AP/Al Propellant by In‐situ Uniaxial Tensile Experimentation in SEM

The failure mechanism of a propellant consisting of hydroxyl terminated poly‐butadiene filled with ammonium perchlorate and aluminum (HTPB/AP/Al) was determined by performing in‐situ uniaxial tensile tests in a scanning electron microscope (SEM). The experimental test plan contained uniaxial tensile test experiments performed at room temperature (25 °C) at three different strain rates (30, 150 and 750 μm min⁻¹). The in‐situ images and in‐situ videos collected by the SEM were correlated with the stress‐strain diagrams created with the tensile experiments, in order to relate the failure mechanism to the features found in the stress‐strain diagram. No significant strain rate dependency of the failure mechanism was observed when working with strain rates up to 750 μm min⁻¹ and working at room temperature. The stress‐strain diagram showed indications of existing cracks and voids opening up prior to the creation of new cracks and/or voids in the sample, debonding of binder with AP particles as well as nucleation and coalescence of voids. On the fracture surfaces of the samples, it was apparent that the binder cleanly separated from the large AP particles but had a better bond with the aluminum particles. However, a difference in the appearance of a short drawing phase in the stress‐strain diagram of the propellant is observed at different strain rates. The presented results clearly demonstrate the major advantage of the combination of microscopic tensile tests with microscopic observations, linking the stress‐strain behavior to the mechanical deformation processes taking place in these propellant samples at the microscopic level.     

The Influence of Film Morphology in High‐Mobility Small‐Molecule:Polymer Blend Organic Transistors

Organic field‐effect transistors (OFETs) based upon blends of small molecular semiconductors and polymers show promise for high performance organic electronics applications. Here the charge transport characteristics of high mobility p‐channel organic transistors based on 2,8‐difluoro‐5,11‐bis(triethylsilylethynyl) anthradithiophene:poly(triarylamine) blend films are investigated. By simple alteration of the film processing conditions two distinct film microstructures can be obtained: one characterized by small spherulitic grains (SG) and one by large grains (LG). Charge transport measurements reveal thermally activated hole transport in both SG and LG film microstructures with two distinct temperature regimes. For temperatures >115 K, gate voltage dependent activation energies (E_A) in the range of 25–60 meV are derived. At temperatures <115 K, the activation energies are smaller and typically in the range 5–30 meV. For both film microstructures hole transport appears to be dominated by trapping at the grain boundaries. Estimates of the trap densities suggests that LG films with fewer grain boundaries are characterized by a reduced number of traps that are less energetically disordered but deeper in energy than for small SG films. The effects of source and drain electrode treatment with self‐assembled monolayers (SAMs) on current injection is also investigated. Fluorinated thiol SAMs were found to alter the work function of gold electrodes by up to ～1 eV leading to a lower contact resistance. However, charge transport analysis suggests that electrode work function is not the only parameter to consider for efficient charge injection.     

Removal of the endocrine disrupter nonylphenol and its estrogenic activity in sludge treatment processes

The estrogenic compound nonylphenol (NP) is frequently found in sludge from sewage treatment works. Hence, when sewage sludge is spread on the land, endocrine-disrupting compounds may get into the soil. The goal of this study was to investigate the extent to which aerobic mesophilic treatment in continuous reactors permits the removal of NP from sludge and how this process may be useful for treating anaerobically stabilised sludge. We also report on the behaviour of NP during the anaerobic treatment of sludge. The reduction in sludge estrogenic activity observed in the different types of treatment, as measured using estrogen-responsive reporter cells lines (MELN bioassay), was compared with NP removal rates. Under anaerobic conditions, no degradation of NP and its estrogenic activity was observed. Indeed, an accumulation of the compound occurred. In contrast, high removal of NP was achieved in aerobic conditions as well as in aerobic Post-treatment of anaerobically pre-digested sludge, with a concomitant reduction of the sludge's estrogenic potency.     

Liquid metal thermal hydraulics R&D at European scale: achievements and prospects

A significant role for a future nuclear carbon-free energy production is attributed to fast reactors, mostly employing a liquid metal as a coolant. This paper summarizes the efforts that have been undertaken in collaborative projects sponsored by the European Commission in the past 20 years in the fields of liquid-metal heat transfer modeling, fuel assembly and core thermal hydraulics, pool and system thermal hydraulics, and establishment of best practice guidelines and verification, validation, and uncertainty quantification (UQ). The achievements in these fields will be presented along with the prospects on topics which will be studied collaboratively in Europe in the years to come. These prospects include further development of heat transfer models for applied computational fluid dynamics (CFD), further analysis of the consequences of fuel assembly blockages on coolant flow and temperature, analysis of the thermal hydraulic effects in deformed fuel assemblies, extended validation of three-dimensional pool thermal hydraulic CFD models, and further development and validation of multi-scale system thermal hydraulic methods.