Dietary Fatty‐Acid Compositions Are more Strongly Reflected in Fatty than Lean Dorsal Fillets of Common Carp (Cyprinus carpio L.)

In this fish‐feeding study, we tested similarity patterns between fatty acids (FA) in diets and common carp (Cyprinus carpio) of fish ponds used for semi‐intensive aquaculture, containing naturally occurring pond zooplankton and different feeds (marine or terrestrial feeds) until carp reached market size. We evaluated if and how total lipid contents in dorsal fillets can reflect dietary FA compositions in farm‐raised common carp and hypothesized that increasing total lipid contents in dorsal fillets significantly increase the similarity between dietary and dorsal fillets’ FA compositions. Results of this study showed that carps had higher total lipids when supplied with marine feeds and dietary FA compositions were indeed more strongly reflected in fatty (i.e. high total lipid contents) than in leaner dorsal fillets (low total lipid contents). Increasing total lipid contents in dorsal fillets significantly increased the similarity between the dietary and dorsal fillets’ FA compositions. In contrast, leaner dorsal fillets had FA patterns that were more distinct from dietary FA. Total lipid contents higher than ~60 mg/g dry weight in dorsal fillets had only limited effects on increasing the similarity between FA compositions of diets and dorsal fillets, and were independent of feed sources. It is thus suggested that higher total lipid contents in dorsal fillets can be used as a proxy to predict dietary FA profiles in common carps, or perhaps even in farm‐raised fish in general.     

Analytic study on structural behavior of the string bed in a tennis racket

The structural behavior of string bed of tennis rackets was investigated subjected to transverse force perpendicular to the string bed. The mathematical model developed for the string bed was implemented into a computer programming code. This code was used to conduct extensive parametric studies on the structural behavior of the string bed for various parameters, including string tension, axial rigidity of the string, string spacing and head size. The analysis results showed that while the transverse stiffness of the string bed is proportional to the string tension, the transverse stiffness of the string bed is inversely proportional to string spacing and head size. In addition, the axial rigidity of the string significantly amplifies the transverse stiffness of the string bed for relatively large transverse deflection of the string bed.     

Soil wettability as determined from using low-field nuclear magnetic resonance

The molarity of ethanol droplet and water drop penetration time methods are commonly used to determine soil wettability because these tests are quick and easy to perform. However, these tests do not provide reproducible results on the same sample. Low-field nuclear magnetic resonance (NMR) is shown as an alternative tool to determine soil wettability. Addition of small amounts of water in dry wettable porous media produces predominant amplitude peaks at transverse relaxation times (T2) of 100 ms or less while addition of water in dry water-repellent porous media with the same pore structure produce predominant amplitude peaks at T2 values near 1000 ms. The geometric mean of T2 (T(2gm)) from water-repellent samples immediately after the addition of water is greater than 1000 ms, which is close to that of bulk water, while T(2gm) from wettable samples immediately after the addition of water is significantly less than 1000 ms. Measurements over time show that water-repellent samples eventually reach the same equilibrium end point as its corresponding wettable sample when continually exposed to water. This paper will show that NMR can be used to formulate a screening criterion for quickly determining wettability. The advantage of using NMR is that the results are reproducible provided the sample is prepared and analyzed in a systematic manner.     

Behavioral modeling of power amplifiers for wireless applications

In this paper, an improved empirical behavioral model for radio‐frequency power amplifiers (RF‐PAs) is presented. The model was implemented in a commercial nonlinear microwave simulator. It belongs to the category of bandpass PA models, which exhibits memory effects due to the low frequency dependence of bias and temperature. Additionally, it facilitates accurate and efficient system level simulations of RF‐PA large‐signal behaviors such as self‐bias, AM‐AM, AM‐PM, gain expansion effects, and intermodulation distortion (IMD) sweet‐spots. The model was validated using measurement data obtained from a commercial CDMA PA at 1.88 GHz. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007.     

On stochasticity and turbulence in the federal funds market

This paper uses various tests from statistics and dynamical systems theory to support stochastic models to explain the behaviour of the federal funds rate. In particular, a fractional Brownian motion is supported by the power spectrum of the series, the structure function test and the Hurst test. A coloured noise model is supported by the signal differentiation test and the space-time separation test. Evidence against the turbulent behaviour hypothesis is also provided.     

Smart Antennas with Two-Dimensional Array Configurations for Performance Enhancement of a Joint Detection CDMA Mobile Radio System

Smart antennas for base stations of cellular mobile radio systems offer the potential of system performance enhancement by taking advantage of the directionally inhomogeneous signal reception at the receiver. In this paper, two-dimensional array configurations employed at the uplink receiver of a joint detection CDMA (JD-CDMA) mobile radio system are investigated. This smart antenna concept can be split up into a novel channel estimator and data detector which incorporate explicitely the information of the direction-of-arrival (DOA) of signals emerging from users assigned to the considered base station. Proceeding from channel models that model the directional inhomogeneity of the mobile radio channel with single DOAs, the link level performance of a JD-CDMA mobile radio system using this smart antenna concept is evaluated for the rural propagation environment. The performance evaluation is based on Monte Carlo simulations of data transmission and average bit error rates versus the average signal to noise ratio per net information bit are presented for different array configurations. Although these results should be considered as upper bounds for the link level performance, they reveal the advantages of implementing two-dimensional array configurations at the uplink receiver of a JD-CDMA mobile radio system.     

Effect of particle tethering and Scale‐Up on solid–liquid mass transfer in Three‐Phase fluidized beds of light particles

Solid–liquid mass transfer in three‐phase fluidized beds with low‐density particles was studied using a tethered benzoic acid particle dissolution technique. Two columns with air, water and polypropylene cylinders were used for experiments. The solid–liquid mass transfer coefficient was found to increase with column diameter but decrease with tether length. The effect of tethering on solid particle movements was also evaluated using radioactive particle tracking (RPT) technique. RPT showed that tethered particles exhibited slower movements. Statistical analysis suggests that tether lengths 3 times the column radius are sufficient to reduce the effects of tethering.     

Chaotic analysis of US money and velocity measures

This paper uses tools from dynamical systems theory to investigate the properties of US money and velocity series. Comparisons are made between simple-sum, Divisia and currency equivalent aggregates (of M1, M2, M3, and L), using the Anderson et al. monthly data (from January 1960 to June 1996).     

Adaptive smooth multicast protocol for multimedia transmission: Implementation details and performance evaluation

In this paper we propose a new single‐rate multicast congestion control scheme named Adaptive Smooth Multicast Protocol (ASMP), for multimedia transmission over best‐effort networks. The smoothness lays in the calculation and adaptation of the transmission rate, which is based on dynamic estimations of protocols' parameters and dynamic adjustment of the ‘smoothness factor’, as well. ASMP key attributes are: (a) TCP‐friendly behavior, (b) adaptive scalability to large sets of receivers, (c) high bandwidth utilization, and finally (d) smooth transmission rates, which are suitable for multimedia applications. We evaluate the performance of ASMP and investigate its behavior under various network conditions through extensive simulations conducted with the network simulator software (ns2). Simulation results show that ASMP can be regarded as a serious competitor of TFMCC and PGMCC. In many cases, ASMP outperforms TFMCC in terms of TCP‐friendliness and smooth transmission rates, while PGMCC presents lower scalability than ASMP. We have implemented ASMP on top of RTP/RTCP protocols in ns2 by adding all the RTP/RTCP protocol's attributes that are defined in RFC 3550 and related to quality of service metrics. Copyright © 2009 John Wiley & Sons, Ltd.     

On a generalized approach to manufacturing energy efficiency

Energy efficiency has become a very significant factor, requiring its inclusion in the manufacturing decision-making attributes. This paper proposes a generalized approach to manufacturing energy efficiency. The basic element of the approach is the division of energy efficiency definition and study into four manufacturing levels, namely process, machine, production line, and factory. Process-level definitions are provided for the majority of manufacturing processes. A machine-level study indicates and solves difficulties, generated by the workpiece geometry, and points out the interaction with the process level through factors, such as the process time. Moreover, machine tool peripherals are responsible for a significant portion of the consumed energy, and classification based on the dependence of their consumption on process variables is required. Studies made on the production line and factory levels show that energy efficiency, at these levels, is heavily dependent on production planning and scheduling and can be improved through the appropriate utilization of machines, with the inclusion of shutdown and eco-modes. Finally, a case study is presented, showing that many of the difficulties towards the optimization of energy efficiency can be dealt with successfully, using the proposed generalized approach.