Thermodynamic evaluation of integrated gasification combined cycle: Comparison between high‐ash and low‐ash coals

In the present study, a coal‐integrated gasification combined cycle power plant is simulated. A high‐ash coal and low‐ash coal are considered to compare the performance of the plant. The combined cycle is in typical commercial size with 450 MW capacity. The feeds are Tabas and Illinois #6 coals which approximately contain more than 30% and 10% ash and have higher heating values of 22.7 MJ/kg and 26.8 MJ/kg, respectively. Energy and exergy analyses are done by aspen plus ^® and ees , respectively. Energy analysis shows that the overall efficiencies of power plants using high‐ash and low‐ash coals are 33% and 28%, respectively. The result shows that in high‐ash case, 52 kg/s coal, 10 kg/s water, and 1050 kg/s air and in low‐ash case, 48 kg/s coal and 820 kg/s air are required for providing mentioned power, approximately. Exergy analysis shows that maximum exergy destruction is in heat recovery steam generator unit. Investigating the emissions shows that high percent of ash in the coal composition has slight effects on the IGCC pollution. Finally, from thermodynamic viewpoint, it is concluded that the high‐ash coal, like the conventional one, can be used as thermally efficient and environmentally compatible feed of IGCCs. Copyright © 2016 John Wiley & Sons, Ltd.     

The effect of weathering on durability and deformability properties of granitoid rocks

In this paper, the effects of weathering on durability and deformability properties for three different types of granitoid rocks were investigated. Five weathering grades ranging from fresh to completely weathered rocks were considered for each rock type. Deformability has been evaluated based on failure strain, tangent and secant modulus. For measuring these parameters, at least five uniaxial compressive strength tests with axial strain recorded were conducted on each weathering grade. To assess the weathering effect on the durability behavior of these rocks, a slake durability test was performed up to 40 cycles. The obtained results indicated that uniaxial compressive strength and elastic modulus dramatically decrease with increasing weathering grade. After moderately weathering grade, remarkable damage was observed in the structure and fabric of considered rocks. The results from slake durability tests showed that the slake durability index for each weathering grade has a certain changes trend which can be used in determination of the weathering grade and the long-term durability assessment. Moreover, the results showed that for evaluation of the long-term durability of the mentioned rock types, at least eight cycles should be considered, while two cycles were sufficient for estimation of weathering grade.     

Chemical composition,antioxidative capacity and interactive antimicrobial potency of Satureja khuzestanica Jamzad essential oil and antimicrobial agents against selected food‐related microorganisms

This study aimed to determine the chemical composition, antimicrobial and antioxidative activity of Satureja khuzestanica Jamzad essential oil. The oil was analysed by GC and GC/MS. Twenty‐eight constituents were identified. The oxygenated monoterpenes (78.22%) were the principal compound group. Among them, carvacrol (53.86%) and thymol (19.84%) were the most abundant constituents. The oil exhibited an acceptable antimicrobial activity against most of the tested microorganisms. The checkerboard method was applied to determine fractional inhibitory concentration indices (FICIs) to interpret the synergetic, additive, indifference or antagonistic interactions between essential oil and each of antimicrobials (lysozyme, ciprofloxacin, fluconazole and amphotericin B) against food‐related microorganisms. The synergetic phenomenon (FICI ≤ 0.5) was observed in majority of combinations with the exception of the essential oil and lysozyme. The oil exhibited good 1,1‐diphenyl‐2‐picrylhydrazyl radical scavenging activity (IC₅₀ = 28.71 μg mL^?1). Also, the oil had strong antioxidative activity in β‐carotene‐linoleic acid assay relative antioxidant activity (RAA% = 95.45). This study demonstrated that the essential oil has beneficial biological properties and its simultaneous application with standard antimicrobials against food‐related microorganisms result in reduction in inhibitory doses of the antimicrobials in vitro.     

Multi-objective Phasor Measurement Unit Placement in Electric Power Networks: Integer Linear Programming Formulation

A multi-objective optimal phasor measurement unit placement model using integer linear programming is presented in this article. The proposed model simultaneously optimizes two objectives, i.e., minimization of phasor measurement unit numbers and maximization of measurement redundancy. To calculate the redundancy criteria, the single-line outage and the phasor measurement unit loss are considered simultaneously. A linear formulation is presented for both objective functions. Also herein, to address conflicting attributes and identify Pareto optimal solutions of the multi-objective optimal phasor measurement unit placement problem, a new multi-objective mathematical programming method is proposed. Finally, a new index, i.e., minimum distance to utopia point, is implemented to select the most preferred solution among the available Pareto front based options on the goal to achieve judicious decision makers. Two test systems, i.e., a modified 9-bus and an IEEE 118-bus test systems, are used to illustrate the effectiveness of the proposed framework.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Time‐domain hybrid formulations for wave simulations in three‐dimensional PML‐truncated heterogeneous media

We are concerned with the numerical simulation of wave motion in arbitrarily heterogeneous, elastic, perfectly‐matched‐layer‐(PML)‐truncated media. We extend in three dimensions a recently developed two‐dimensional formulation, by treating the PML via an unsplit‐field, but mixed‐field, displacement‐stress formulation, which is then coupled to a standard displacement‐only formulation for the interior domain, thus leading to a computationally cost‐efficient hybrid scheme. The hybrid treatment leads to, at most, third‐order in time semi‐discrete forms. The formulation is flexible enough to accommodate the standard PML, as well as the multi‐axial PML. We discuss several time‐marching schemes, which can be used à la carte, depending on the application: (a) an extended Newmark scheme for third‐order in time, either unsymmetric or fully symmetric semi‐discrete forms; (b) a standard implicit Newmark for the second‐order, unsymmetric semi‐discrete forms; and (c) an explicit Runge–Kutta scheme for a first‐order in time unsymmetric system. The latter is well‐suited for large‐scale problems on parallel architectures, while the second‐order treatment is particularly attractive for ready incorporation in existing codes written originally for finite domains. We compare the schemes and report numerical results demonstrating stability and efficacy of the proposed formulations. Copyright © 2014 John Wiley & Sons, Ltd.