Does increased confidence among novice drivers imply a decrease in safety? The effects of skid training on slippery road accidents

Finnish driver training was renewed in 1990 with the inclusion of a compulsory skid training course in the curriculum. The study evaluated the renewal's effect on accidents in slippery road conditions. A questionnaire was sent by mail to 41000 novice drivers who were randomly selected from the official register of driving licences. It included questions on driving exposure and the accidents the drivers had been involved in during 6-18 months following licensing. The rate of return was 74.7%. Half of the drivers had received their licence in 1989 and had, therefore, not received any skid training. The other half had received their licence in 1990 after the introduction of the skid training course. The results showed no effects of the renewal on slippery road accidents for either male or female drivers. Another questionnaire was sent to 1300 old and new curriculum drivers immediately after licensing and a second time 1/2-1 year later, both with questions about skills, worries and perceived risks regarding driving in slippery conditions. The new curriculum drivers showed higher confidence in their skills and they were less afraid to drive in slippery conditions than the old curriculum drivers. This increase in confidence as a result of skid training is discussed. It is argued that high confidence in one's personal skills does not necessarily imply negative safety. The crucial factor is how these skills are used, and for what purpose.     

Oxidative DNA damage correlates with carotid artery atherosclerosis in hemodialysis patients

Oxidative stress is accepted as a nonclassical cardiovascular risk factor in chronic renal failure patients. The aim of this study was to evaluate the relation between oxidative DNA damage (8‐hydroxy‐2′‐deoxyguanosine/deoxyguanosine [8‐OHdG/dG] ratio), oxidative stress biomarkers, antioxidant enzymes, and carotid artery intima‐media thickness (CIMT) in hemodialysis (HD) patients. Forty chronic HD patients without known atherosclerotic disease and 48 age‐ and sex‐matched healthy individuals were included in the study. Plasma malondialdehyde (MDA) levels and 8‐OHdG/dG ratio were determined as oxidative stress markers. Superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities were measured as antioxidants. CIMT was assessed by carotid artery ultrasonography. 8‐OHdG/dG ratios and MDA levels were higher; SOD and GPx activities were lower in HD patients compared to controls. HD patients had significantly higher CIMT compared to controls (0.61 ± 0.08 vs. 0.42 ± 0.05, p < 0.001). There was a significant positive correlation between CIMT and 8‐OHdG/dG ratio (r = 0.57, p < 0.01) and MDA levels (r = 0.41, p < 0.01), while there was a significant negative correlation between CIMT and SOD (r = ?0.47, p < 0.01) and GPx levels (r = ?0.62, p < 0.01). It is firstly demonstrated that CIMT is positively correlated with oxidative DNA damage in HD patients without known atherosclerotic disease.     

Thermo-electrical characterization of Sn–Zn alloys

The thermo-electrical properties of Sn–Zn alloys have been investigated for four different compositions. The SEM micrographs and EDX analysis of the samples have been obtained. The electrical resistivity measurements were performed by using four-point probe technique in the temperature range 300 K–575 K. The resistivity of samples increases linearly with temperature and the electrical conductivity is inversely proportional to temperature. The electrical current preferentially flows through the pure Sn phase having lower resistivity in the matrix. Also, thermal conductivity of samples has been measured by using the radial heat flow method. It has been found that the thermal conductivity decreases with the increasing temperature and composition of Sn. The results were consistent with available experimental results of other studies. Finally, the temperature coefficient of electrical resistivity and the temperature coefficient of thermal conductivity have been determined, which were independent from the composition of Sn and Zn.     

Supervision of psychological assessment: A developmental model.

The supervision of assessment has been greatly neglected in the literature. A model of supervisee development, from novice to master assessor, is presented. The model focuses on the development of the ability to integrate data into a coherent formulation of the person being tested. Appropriate supervision depends on a matching of the supervisor's behavior to the supervisee's needs, as specified by the supervisee's current level of development. This development is dramatized by improvements in interpreting specific data points and in the recognition of larger patterns in the data. This skill acquisition occurs within the affective context of the supervisor–supervisee relationship as the interaction elicits both inter- and intrapersonal issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Surgical landmarks during mastoidal and petrosal operations

We performed a laparoscopy-assisted hepatectomy on a 52-year-old woman with a large hepatic cavernous hemangioma (longest diameter, 8.5 cm). With the use of Pringle's maneuver, the left lateral segment of the liver was resected with a Cavitron ultrasonic surgical aspirator (CUSA) while lifting the abdominal wall. Postoperative hepatic dysfunction was mild and transient, resolving spontaneously early after surgery. We intend to expand the indications of this minimally invasive procedure for hepatic resection.     

Experimental investigation of steel fiber reinforced concrete box beams under bending

Reduction of dead weight of a reinforced-concrete (RC) structure without too much concession in its load carrying capacity has always been an attractive study subject because it engenders (1) a decrease in dimensions of the members, (2) a decrease in the reinforcement steel, and (3) a decrease in lateral inertia forces during severe earthquakes. In this study, nine RC beams of outer dimensions of 300 × 300 × 2000 mm, six of which are box beams, designed and produced using a C20 class steel fiber concrete, (SFRC) with the commonly used steel fiber type of Dramix-RC-80/0.60-BN at a dosage of 30 kg/m³, are tested under bending. The mechanical behaviours of all these nine beams under bending are recorded from the beginning of the test till the ultimate failure of the tensile reinforcement in a two-point beam-loading setup. The proportions of (1) loss in ultimate load versus reduction in dead weight and (2) (ultimate experimental load)/(ultimate theoretical load) of the SFRC box beams are determined for two different box thicknesses. Dimensionless behaviour relationships of all the SFRC beams are determined, and the experimentally obtained relationship between the ratio of (actual ultimate load)/(theoretical ultimate load) and the ratio of (wall thickness)/(beam height) for the SFRC box beams is expressed diagrammatically.     

Optical pH measurements with water dispersion of polyaniline nanoparticles and their redox sensitivity

A new method for optical pH and redox measurements with a commercially available water dispersion of polyaniline (PANI) nanoparticles (mean particle size, 46 nm) is presented. The pH measurements are based on the acid-base equilibrium of PANI and were carried out either by combining both the automated sequential injection analysis (SIA) and UV-visible spectrophotometric techniques or with a fiber-optic light guide. In the former case, the detection was done in continuous mode at lambda = 800 nm by using the SIA technique for transporting the sample to a flow-through cell, which was placed in the light path of the photometer. With the fiber-optic light guide, the detection was done in batch mode at lambda = 400 and 580 nm. In both methods, fresh pH reagent (PANI) solution was used in each measurement, thus overcoming the problem with hysteresis (memory effect), which is usually observed with PANI films. The PANI nanoparticles were characterized with UV-visible spectroscopy in pH buffer solutions between pH 2-12 and a protonation constant of logK(0.5H,L)(H(0.5)L) = 4.4 was calculated from these data. Fast pH measurements can be done between pH 6 and 10.5 depending on the measuring technique. It is possible to determine pH with an accuracy of 0.1 pH unit between pH 8 and 10.5 (RSD, 0.5-2%). Redox transitions typical for PANI films were also observed for water solutions of PANI nanoparticles in the presence of the hexacyanoferrate(II/III) and the iron(II/III) oxalate redox couples. The absorbance at lambda = 875 nm is linearly dependent on the logarithm of the concentration ratio (0.1-10) of the iron oxalate redox couple.     

Trace element distributions between matte and slag in direct nickel matte smelting

ABSTRACT

Behaviour of trace elements in the nickel matte smelting was studied at 1673 K (1400°C) by equilibration-quenching techniques followed by direct phase analyses using electron probe X-ray microanalysis and laser ablation-inductively coupled plasma-mass spectrometry. The matte-slag samples at silica saturation were equilibrated with SO₂-CO-CO₂-Ar mixtures of fixed p_SO2, p_S2 and p_O2 in order to obtain a pre-determined oxidation degree for the sulphide matte, and thus to generate a targeted iron concentration of the nickel-copper–iron sulphide matte (Ni:Cu = 5, w/w), depending on the slag chemistry. The slag composition was varied from 0 to 2 wt-% K₂O and 0–10 wt-% MgO in silica saturation. The studied trace elements were Co, Ge, Pb, Se and Sn, but also the matte-to-slag distributions of the slag forming fluxing components Mg (MgO) and Si (SiO₂) were determined experimentally. Selenium was the only trace element studied which strongly enriched in the low-iron nickel mattes, and the deportment became larger when the sulphide matte depleted with iron. All the other trace elements behaved in the opposite way.     

Efficient Recovery of Combustibles From Coking Coal Fines

The processing of three Indian coking coal fines with feed ash values of 25.12% (S1), 22.97% (S2), and 30.38% (S3) was studied. Substantial improvement in the overall recovery of combustible could be obtained by splitting sample S1, exhibiting good washability but poor release behavior, into a coarser and a finer fraction and treating them by gravity and Jameson cell flotation, respectively. Sample S2 had over 70% of the material below 100 µm and had excellent release characteristics. The Jameson cell flotation indeed resulted in very high recovery of combustibles at the desired target ash values and split processing was not required for this sample. The floatability and washability characteristics of sample S3 indicated that gravity-based methods might improve combustible recovery in terms of theoretical yield at the desired product ash values. A combination of spiral concentration of the coarser fraction and froth flotation of the finer fraction using a Jameson cell showed some improvement in the combustible recovery of this sample. It was established in this study that if the floatability is poor or moderate, then split processing improves coal cleaning performance. Flotation alone may be recommended only when samples exhibit excellent floatability.