Critical dynamics in the normal phase near the λ-transition in 3He-4He mixtures. I. Theoretical results

We study the asymmetric model of Siggia and Nelson for the critical dynamics of ³He-⁴He mixtures above T .The static effects resulting from the singular behavior of the susceptibilities are separated from genuine dynamic effects and treated in a consistent way. The calculated expressions for the thermal conductivity, thermal diffusion ratio and mass diffusion in the normal phase serve as a basis for a subsequent quantitative comparison with experiment. We use a field theoretical non-asymptotic renormalization procedure for our calculations. General relations resulting from the structure of the dynamical model for the mixtures are derived within this theoretical formulation.     

Predicting roadheader performance by using artificial neural network

With growing use of roadheaders in the world and its significant role in the successful accomplishment of a tunneling project, it is a necessity to accurately predict performance of this machine in different ground conditions. On the other hand, the existence of some shortcomings in the prediction models has made it necessary to perform more research on the development of the new models. This paper makes an attempt to model the rate of roadheader performance based on the geotechnical and geological site conditions. For achieving the aim, an artificial neural network (ANN), a powerful tool for modeling and recognizing the sophisticated structures involved in data, is employed to model the relationship between the roadheader performance and the parameters influencing the tunneling operations with a high correlation. The database used in modeling is compiled from laboratory studies conducted at Azad University at Science and Research Branch, Tehran, Iran. A model with architecture 4-10-1 trained by back-propagation algorithm is found to be optimum. A multiple variable regression (MVR) analysis is also applied to compare performance of the neural network. The results demonstrate that predictive capability of the ANN model is better than that of the MVR model. It is concluded that roadheader performance could be accurately predicted as a function of unconfined compressive strength, Brazilian tensile strength, rock quality designation, and alpha angle R ² = 0.987. Sensitivity analysis reveals that the most effective parameter on roadheader performance is the unconfined compressive strength.     

Edible oil evaluation by room odor tests: A preliminary report

Room odors developed on heating edible fats in open vessels were evaluated and characterized by a 20 member odor panel. Edible fats tested were: special soybean salad and cooking oils, hydrogenated soybean oil and some commercial salad and cooking oils. Factors were investigated that affect reliability and reproducibility of the test and the acuity of the panel members. The effects of fry temperature and size of sample were investigated. The method has been applied to a study of hydrogenated and unhydrogenated soybean oil samples. Presented at the AOCS Meeting, Chicago, September 1970. No. Market. Nutr. Res. Div., ARS, USDA.     

Long term storage of soybean and cottonseed salad oils

Commercially prepared and packaged soybean and cottonseed salad oils from several different processors were evaluated periodically during storage for 12 months. Partially hydrogenated and winterized soybean oils, as well as unhydrogenated soybean salad oils, were stored in bottles and cans at 78 and 100 F. Control samples of all oils were held at 0 F during the entire test. Some lots in bottles and cans were packaged under nitrogen to improve storage stability. Agreement was good between organoleptic and oxidative evaluation of aged oils. After 26 weeks of storage at 100 F, the flavor of partially hydrogenated-winterized oils packaged under nitrogen showed a minimum loss. These same oils did not exhibit much, if any, reduction in their oxidative stability as indicated by storage peroxide values (active oxygen method). Soybean oil not protected with nitrogen demonstrated progressive flavor deterioration at 100 F. After 10 weeks of storage, the deterioration became marked and the flavor score was below 5. From limited observations, bottled oils appear to have a better stability than oils packaged in screw-cap tin cans. Hydrogenated oils packaged under nitrogen in cans had good oxidative stability, but some lowering of the flavor score was observed. Nonhydrogenated soybean oils packaged in tin cans not under nitrogen exhibited the most rapid flavor deterioration of all lots of oil investigated. Presented in part at the AOCS meeting, New York, October 1968 ARS, USDA     

Stereoisomere Aromastoffe

Zusammenfassung Die Synthese von acht verschiedenen 2-Alkoxy-5-alkyl-tetrahydrofuranen und ihren Stereoisomeren wird vorgestellt, sieben von ihnen sind als Aromastoffe der Wassermelone bekannt. Alle Stereoisomeren werden, ausgehend von optisch reinen-Nonalacton-Enantiomeren, synthetisiert und mit Diisobutylaluminiumhydrid selektiv zu den entsprechenden Lactolen reduziert. Die Lactole werden mit den gewünschten Alkoholen in schwach saurer Lösung zucis/trans-Diastereomeren umgesetzt und durch Flüssigchromatographie in optisch reine Stereoisomere getrennt. Die sensorische Charakteristik aller Stereoisomeren der sieben Verbindungen wird aufgezeigt. Die Trennung dercis/trans-Diastereomeren an DB-210 wird vorgestellt und die chirospezifische Differenzierung der acht Verbindungen diskutiert.

---

Stereoisomeric flavour compounds L. Optically pure 2-alkoxy-5-alkyl-tetrahydrofurans — structures and properties

Summary The synthesis of eight different 2-alkoxy-5-alkyltetrahydrofurans and their stereoisomers is presented, seven of which are known to be flavour compounds of water melons. All stereoisomers were synthesized from optically pure-lactone enantiomers, which were selectively reduced by diisobutylaluminium hydride to the corresponding lactols. The lactols were treated with the desired alcohol component in weakly acidic media to yield thecis/trans diastereoisomers, which were separated into optically pure stereoisomers by liquid chromatography. The sensory characteristics of all four stereoisomers of the seven compounds are given. The Stereodifferentiation of thesecis/trans diastereoisomers on DB-210 is demonstrated and the direct chirospecific differentiation of all eight compounds discussed.

     

The effects of silicon on the properties of tantalum

The microalloying of tantalum with silicon has been effectively used on a commercial scale. However, data on effects of microalloying on processibility, microstructure and mechanical properties are not readily available. To develop some data, tantalum powder with various levels of silicon (0–50 ppm) was processed under identical conditions. Sheet samples were then annealed at different temperatures and evaluated via microstructural, chemical and mechanical tests. The recrystallization temperature was found to increase with silicon content, most probably as a result of the presence of an intermetallic (Ta₃Si) phase. The mechanical properties of unrecrystallized tantalum are, as expected, significantly different from those of recrystallized tantalum.     

A case study validation of a knowledge-based approach for the selection of requirements engineering techniques

Requirements engineering (RE) is a critical phase in the software engineering process and plays a vital role in ensuring the overall quality of a software product. Recent research has shown that industry increasingly recognizes the importance of good RE practices and the use of appropriate RE techniques. However, due to the large number of RE techniques, requirements engineers find it challenging to select suitable techniques for a particular project. Unfortunately, technique selection based on personal experience has limitations with regards to the scope, effectiveness and suitability of the RE techniques for the project at hand. In this paper, a Knowledge-based Approach for the Selection of Requirements Engineering Techniques (KASRET) is proposed that helps during RE techniques selection. This approach has three major features. First, a library of requirements techniques was developed which includes detailed knowledge about RE techniques. Second, KASRET integrates advantages of different knowledge representation schemata and reasoning mechanisms. Thus, KASRET provides mechanisms for the management of knowledge about requirements techniques and support for RE process development. Third, as a major decision support mechanism, an objective function evaluates the overall ability and cost of RE techniques, which is helpful for the selection of RE techniques. This paper makes not only a contribution to RE but also to research and application of knowledge management and decision support in process development. A case study using an industrial project shows the support of KASRET for RE techniques selection.

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.