Hydrotreatment of Cracked Light Gas Oil

Since worldwide conversion processes are used to upgrade heavy oil to distillates, the hydrotreatment of light gas oil (LGO) as a downstream process has been used more extensively. This fraction (LGO) is produced from thermal or catalytic cracking or hydrocracking processes. It contains high amounts of unsaturates, nitrogen, and sulfur compounds which cause instability while in storage due to gum formation. The use of LGO as a fuel oil for diesel engines plugs the filter and produces sulfur and nitrogen emissions. These sulfur and nitrogen compounds arise from the cracking of heavy cuts and are aromatic-type molecules which are difficult to hydrogenate. This cut also possesses a low cetane index (CI) which must be increased (by aromatic hydrogenation) because of its poor motor performance. Color and color stability are associated with a high bromine number (BN, unsaturated content), nitrogen, and aromatic content. In order to improve these properties, a deep hydrogenation is sometimes required.     

Bio-hydrogen production during acidogenic fermentation in a multistage stirred tank reactor

The objective of this study was to evaluate the production of hydrogen in a two-stage CSTR system – both reactors having the same volume – and compare its performance with a conventional one-stage process. The lab-scale two-stage and one-stage systems were operated at five pHs and five hydraulic retention time (HRTs). The maximum volumetric hydrogen productivity and yield obtained with the two-stage system were 5.8 mmol L⁻¹ h⁻¹ and 2.7 mol H₂ mol glucose⁻¹, respectively, at an HRT of 12 h and pH 5.5. Overall, the two-stage system showed, at steady state, a better performance that the one-stage system for all the evaluated pHs. However, a comparison between the one-stage system, operating at 6 h of HRT, and the first reactor of the two-stage system at the same HRT did not show any significant difference, highlighting the positive impact of having a two-stage process. The determination of the ratio between the experimental measured H₂ in the gas phase and the theoretical H₂ generated in the liquid phase (discrepancy factor) indicated that an important part of the hydrogen produced in the first reactor was transferred into the second reactor instead of being desorbed in the headspace. Therefore, the improving of hydrogen production in the two-stage system is rather attributed to the increased transfer of hydrogen from liquid to gas than an actual total hydrogen production increase.     

Conversion and hydroconversion of hydrocarbons on zeolite-based catalysts: an FT-IR study

The interaction of HZSM5 and Mo-ZSM5 with benzene, naphthalene, toluene, ortho-xylene, para-xylene, n-butane, isobutane, n-heptane, and methylcyclohexane, in the range 100–773 K has been investigated using FT-IR spectroscopy. Hydrogen bonded species with the internal bridging and the external terminal OHs has been detected. The reactivity at high temperature has also been studied. The access to the internal cavities and to the strongly acidic OHs is at least partly hindered in the case of Mo-ZSM5. The catalytic activity of ZSM5 was moderated by the addition of molybdenum, with lower cracking and higher liquid yields.     

An FT-IR study of the adsorption of aromatic hydrocarbons and of 2,6-lutidine on H-FER and H-ZSM-5 zeolites

The interaction of aromatic hydrocarbons benzene, toluene, o-, m- and p-xylene and of methyl pyridines (in particular 2,6-lutidine) with H-ZSM-5 and H-FER zeolites has been studied. Two different H-ZSM-5 samples with strongly different intensity ratios between the two main OH stretching bands have been used. Benzene, toluene and p-xylene enter easily the cavities and give rise to three different H-bonded complexes. Two of them are strongly bonded while the third is likely a very hindered and distorted one. o-Xylene enters slowly the cavities and m-xylene even more slowly. Faster diffusion occurs at higher temperatures. On the contrary, xylenes do not enter the FER cavities. In spite of its steric hindrance, supposed to be the same of m-xylene, 2,6-lutidine enters fast the ZSM channels and is protonated by the internal sites. On the contrary, it does not enter the FER cavities, but it is protonated too on the external silanols sites. Evidence is provided for some kind of heterogeneity of the internal sites of ZSM-5 zeolite. Additionally, it is concluded that other effects besides the molecular sieving effect may play a role in the access and diffusion of molecules into the zeolite channels.     

Biodegradable poly(DL-lactic-co-glycolic acid) microspheres containing tetracaine hydrochloride. In-vitro release profile

This study investigated the effects of chronic muscle inflammation on indices of antioxidant status and muscle injury after eccentric exercise. Eight subjects each performed 70 maximal voluntary eccentric muscle actions on an isokinetic dynamometer, using the knee extensors of a single leg. Venous blood samples were collected into serum and EDTA tubes 5 and 3 days before exercise, immediately before exercise, and then again on days 3, 4, 5, 6, 7, 10 and 12 after the bout. Needle biopsies were taken from the vastus lateralis of six subjects, a week before exercise (baseline), and again on days 4 and 7 post-exercise. The concentrations of malondialdehyde in plasma and muscle were used as markers of lipid peroxidation. Creatine kinase activity, beta-glucuronidase activity and total antioxidant capacity were determined in serum. In muscle, aqueous and bound total antioxidant capacity, the aqueous sulphydryl concentration, and beta-glucuronidase and glucose-6-phosphate dehydrogenase activity were determined. No changes were detected in serum total antioxidant capacity, serum creatine kinase and beta-glucuronidase after the baseline biopsy. After exercise serum creatine kinase and beta-glucuronidase were elevated although other serum measures were unchanged. In muscle, aqueous and bound total antioxidant capacity, sulphydryls, glucose-6-phosphate dehydrogenase and beta-glucuronidase were all elevated. Despite evidence of inflammation in this study, muscle antioxidant status was not compromised, and malondialdehyde was unaltered in muscle and plasma. Therefore, this study provides no evidence that chronic muscle inflammation compromises antioxidant status or increases lipid peroxidation.     

Hot metal pretreatment by powder injection of lime‐based reagents

A mathematical model earlier proposed has been improved to predict the kinetics of multicomponent reactions in the hot metal pretreatment through the injection of reactive fluxes. It is assumed that there are two reaction zones along the flux injection operation: a transitory reaction between the rising particles and the bulk metal, and the permanent reaction between the metal and the top slag. A criterion to estimate the fraction of solids which will react with molten iron in a three‐phase jet (gas‐solid‐liquid) was considered; this fraction of solids carries out the transitory reaction. The model also takes into account the thermodynamic changes produced in the metal and slag due to the chemical reactions. Calculated results of the model are in good agreement with experimental results for the desulfurization of hot metal through the injection of CaO‐SiO₂‐CaF₂‐FeO‐Na₂O reagents at 1400 ‐ 1450 °C. Two kinds of hot metal were tested, one with a low carbon mass content of 3 % and the other with a high carbon mass content of 4.5 %.     

Fifteen cases of atropine poisoning after honey ingestion

Fifteen persons developed atropine poisoning following consumption of wasp honey. Clinical signs, antidotal response and the presence of Datura plants near the wasp nests supported that the intoxications were caused by ingestion of atropine-contaminated honey. Two deaths occurred from heatstroke because of the poisoning and high environment temperatures and intensive physical activity.     

Fuel use and design analysis of improved woodburning cookstoves in the Guatemalan Highlands

This study examined the fuel use and design of an improved woodburning cookstove (plancha), in comparison to traditional cooking over an open woodfire. These cookstoves had been randomly introduced into population households in the Guatemalan Highlands that had previously used open woodfires. This research consisted of: (1) a 12-household Kitchen Performance Test (KPT) over a 4-day period and (2) single-day participant observation in five households. The KPT monitored fuel consumption and the number, age, and gender of people who were cooked for, while the participant observation was used to form a complete understanding of fuel use patterns and to examine the influence of stove condition and cooking behavior. In spite of fairly low variability in the fuel use data (coefficients of variation of about 0.34) the KPT did not show statistically significant differences in fuel use between the two cooking methods. It is possible that increased study power through a larger sample size may have resulted in a statistically significant difference in favor of the plancha, but it is doubtful that the size of the effect would be of any practical significance. Thus, although other studies have shown that the plancha is extremely effective in reducing indoor air pollution in the study area, the KPT did not indicate that it offered any benefits with respect to fuel use. Practical and experimental recommendations for future cookstove efficiency studies are presented, with directions for continued work in this area.     

Analysis of stabilization circuits for phase-noise reduction in microwave oscillators

Two configurations for oscillator phase-noise reduction using stabilization circuits have been demonstrated in the literature. One of them is based on the self-injection of the oscillator signal, after it passes through a long delay line or a high-quality-factor resonator. The second one is a stabilization loop, containing a frequency discriminator. In this paper, an in-depth analytical comparison of these two configurations, respectively based on injection locking and phase-locking principles, is presented. Analytical expressions are provided for the variation of the steady-state solution and its phase noise versus the parameters of the feedback network. The expressions are rigorously validated with harmonic balance. Instabilities reported by other authors are investigated through bifurcation analysis. The new expressions enable a good understanding of the amplitude and frequency jumps and sharp phase-noise maxima obtained simulations and measurements versus the feedback parameters. A practical 5-GHz voltage-controlled oscillator has also been implemented, for validation purposes.