Gas/liquid interfacial area per unit volume and volumetric mass transfer coefficient in stirred slurry reactors

In three-phase systems, where the liquid constitutes the continuous phase, solid is the catalyst and gas represents the dispersed phase, there are decisive criteria which have to be observed in reactor design. These are e.g. the interfacial area per unit volume between gas and liquid, the volumetric mass transfer coefficient and the mass transfer coefficient. The basic aim of the present work was therefore the investigation of these parameters in relation to the main influencing parameters. Process parameters stirrer speed and superficial gas velocity were varied as well as the physical properties such as liquid viscosity, solids concentration, particle diameter and a geometrical parameter, i.e. reactor diameter. The sulphite method was employed for the determination of these values. The test results confirmed the known relationships of power consumption and superficial gas velocity. An increase in the liquid viscosity leads to a decrease in all the tested values. In most cases, suspended solid particles lead to a lowering of the test values. The influence of the tank diameter on the plots of the test values against specific power consumption turned out to be invariant so that a scale-up of geometrically similar systems can be carried out at constant power consumption, superficial gas velocity and liquid viscosity.     

Spectral studies of zinc octacarboxyphthalocyanine aggregation

The association of zinc octacarboxyphthalocyanine, was studied using UV–vis absorption and fluorescence emission spectroscopy; the effects of dye concentration, pH and solvents on spectra were discussed. Calculations showed that the dye dimerized in aqueous solutions ranging from 5.0 × 10^?7 to 5.0 × 10^?5 mol/dm³, at 25 °C. The dimerization constant of 10⁶ dm³/mol and the spectral Q band shift of 1185 cm^?1 imparted by dimerization indicated strong π–π interactions between phthalocyanine molecules. Red S₁ fluorescence of the dye monomer was observed in various solutions which was quenched owing to molecular association and other factors. The strong influence of pH on both aggregation and fluorescence was discussed. At pH < 5.0, only dye aggregates were present in solution; monomers appeared at pH ≥ 5.0 and, in alkaline solution, only the monomeric anions of phthalocyanine existed. The spectral absorption and emission data for the dye in binary solvents revealed that at concentrations ranging from 0.5 × 10^?5 to 1.0 × 10^?5 mol/dm³, the dye can be used in photosensitised oxidation reactions.     

Kinetics of lactose hydrolysis and galactooligosaccharides formation in beverages based on goat’s milk and its permeate

Food Science and Biotechnology - The aim of this work was the analysis of galactooligosaccharides (GOS) formation in a model mixture of goat’s milk and its permeate from microfiltration and...     

Evaluation of apple texture with contact acoustic emission detector: A study on performance of calibration models

Performance of calibration models for evaluation of apples sensory texture with contact acoustic emission detector (CAED) was studied. For model evaluation and testing, 2500 apples of 19 cultivars were harvested over two seasons. Apples were stored at normal atmosphere (NA), controlled atmosphere (CA) for different periods or were treated with 1-methylcyclopropene (1-MCP) in order to obtain a high variability of texture and fruit maturity. Apples were tested simultaneously in two distinct laboratories. The models were created and validated on averaged values from 10 fruits using simple linear regression, multiple linear regression (MLR) and principal component regression (PCR). Performance statistics of the models were expressed in terms of determination coefficient (R²), root mean square errors of cross validation (RMSECV) or prediction (RMSEP) and ratio of prediction to deviation (RPD). Firmness and total acoustic emission counts were predictors of sensory texture in the models. MLR and PCR models show better performance for prediction of sensory data than simple linear regression models however PCR models show the best results among models tested in this study. Common PCR models for several cultivars allow for successful prediction of hardness (RPD > 2.0), crispness and overall texture (1.5 < RPD < 2.0). The single-cultivar PCR models, constructed on data sets containing 26-39 averaged values, reveal significantly better performance (RPD > 2.0 for most of the cases) than the common PCR models for many varieties.     

Performance comparison of AlGaAs,GaAs and InGaP tunnel junctions for concentrated multijunction solar cells

Four tunnel junction (TJ) designs for multijunction (MJ) solar cells under high concentration are studied to determine the peak tunnelling current and resistance change as a function of the doping concentration. These four TJ designs are: AlGaAs/AlGaAs, GaAs/GaAs, AlGaAs/InGaP and AlGaAs/GaAs. Time‐dependent and time‐average methods are used to experimentally characterize the entire current–voltage profile of TJ mesa structures. Experimentally calibrated numerical models are used to determine the minimum doping concentration required for each TJ design to operate within a MJ solar cell up to 2000‐suns concentration. The AlGaAs/GaAs TJ design is found to require the least doping concentration to reach a resistance of <10⁻⁴ Ω cm² followed by the GaAs/GaAs TJ and finally the AlGaAs/AlGaAs TJ. The AlGaAs/InGaP TJ is only able to obtain resistances of ≥5 × 10⁻⁴ Ω cm² within the range of doping concentrations studied. Copyright © 2010 John Wiley & Sons, Ltd.