Nonionic surfactants and dispersants for biopolishing and stonewashing with Hypocrea jecorina cellulases

Cellulases are widely applied in textile finishing, such as for the removal of protruding surface fibrils to reduce pilling propensity and to achieve the worn‐out look in denim garments. The main drawback of enzymatic denim processing is the back‐staining of indigo, which reduces the desired blue–white contrast. Alongside an accurate selection of the type of cellulase or vigorous post‐washing of the garments, the simultaneous application of auxiliaries in the enzymatic treatment may help to reduce back‐staining and improve cellulase efficiency. In the present work, the influence of additives such as surfactants and dispersing agents on indigo adsorption and on the treatment of an undyed cotton fabric with Hypocrea jecorina cellulases was investigated. Indigo adsorption was successfully reduced by more than 75% with ethoxylated nonionic surfactants at concentrations below 0.2 g l^?1. The weight loss of cotton fabrics after 120 min treatment was significantly increased with nonionic surfactants and polyvinylpyrrolidone. It could be further shown that protein adsorption on the cotton fabric decreased with the increasing concentration of the additives, while the nonionic surfactants were more efficient than the polyvinylpyrrolidone. Adsorption of a complete cellulase mixture was affected differently by the surfactants than by an exoglucanase‐free endoglucanase‐rich preparation.     

STRUCTURE and PROPERTIES of ALKANAL OXIMES as COPPER EZTRACTANTS

ABSTRACT

Composition, structure and interfacial activity of alkanal oximes and kinetics of copper extraction from chloride solutions are discussed. Semiempirical self-consistent field calculations are used to study the structure of alkanal oximes and their mono- and dihydrates. These calculations are in a qualitative agreement with the ratio of alkanal (Z)-and (E)-isomers, interfacial activity and kinetics data.     

Correlation between matrix structural order and compressive stress exerted on silicon nanocrystals embedded in silicon-rich silicon oxide

Abstract

Silicon nanocrystals embedded in a silicon oxide matrix were deposited by radio frequency reactive magnetron sputtering. By means of Raman spectroscopy, we have found that a compressive stress is exerted on the silicon nanocrystal cores. The stress varies as a function of silicon concentration in the silicon-rich silicon oxide layers varies, which can be attributed to changes of nanocrystal environment. By conducting the Fourier transform infrared absorption experiments, we have correlated the stresses exerted on the nanocrystal core to the degree of matrix structural order.

PACS

78.67.Bf, 78.67.Pt, 73.63.Bd, 78.47.D, 74.25.Nd     

On the origin of emission and thermal quenching of SRSO:Er3+ films grown by ECR-PECVD

Silicon nanocrystals embedded in a silicon-rich silicon oxide matrix doped with Er³⁺ ions have been fabricated by electron cyclotron resonance plasma-enhanced chemical vapor deposition. Indirect excitation of erbium photoluminescence via silicon nanocrystals has been investigated. Temperature quenching of the photoluminescence originating from the silicon nanocrystals and the erbium ions has been observed. Activation energies of the thermally activated quenching process were estimated for different excitation wavelengths. The temperature quenching mechanism of the emission is discussed. Also, the origin of visible emission and kinetic properties of Er-related emission have been discussed in details.     

Technology of braze welding absorber tubes to copper foil in solar collectors by the GTA method

The classification of aluminium alloys on the basis of main alloy elements and usability for heat treatment is presented. The essential problems occurring in welding of aluminium and its alloys are mentioned. The most advanced methods of joining these materials are described. Results of investigations into the possibility of joining of thin walled elements of aluminium alloys by low heat input arc welding methods, plasma arc welding and hybrid laser+MIG welding are also presented.     

Investigation of high-temperature reactions within the ZrSiO4–Al2O3 system

Solid state reactions between ZrSiO₄ and αAl₂O₃ in powders of stoichiometric composition 3Al₂O₃·2SiO₂ were studied by X-ray diffraction and electron scanning microscopy with energy dispersive X-ray analysis (SEM + EDX). Data were obtained at temperature ranging from 1400 °C to 1600 °C for a period of time ranging from 30 min to 60 h. The results indicate that ZrSiO₄ and αAl₂O₃ react and form crystalline ZrO₂, crystalline mullite (almost 3Al₂O₃·2SiO₂ composition) and non-crystalline silicon–alumina phase (pre-mullite). At the temperature of 1600 °C the fastest stage of reaction is dissociation of ZrSiO₄. Obtained results show that dissociation of zircon is a first-order reaction. The dissolution of Al₂O₃ particles and diffusion of Al into non-crystalline phase seem to be the slowest step of the reaction.     

Exogenous Ghrelin Accelerates the Healing of Acetic Acid-Induced Colitis in Rats

Previous studies have shown that ghrelin reduces colonic inflammation induced by trinitrobenzene sulfonic acid and dextran sodium sulfate. In the present study we determined the effect of treatment with ghrelin on the course of acetic acid-induced colitis in rats. Rectal administration of 3% acetic acid solution led to induction of colitis in all animals. Damage of the colonic wall was accompanied by an increase in mucosal concentration of pro-inflammatory interleukin-1β (IL-1β) and tumor necrosis factor-α (TNF-α), as well mucosal activity of myeloperoxidase. Moreover, induction of colitis led to a reduction in colonic blood flow and DNA synthesis. Administration of ghrelin after induction of colitis led to faster regeneration of the colonic wall and reduction in colonic levels of IL-1β, TNF-α, and myeloperoxidase. In addition, treatment with ghrelin improved mucosal DNA synthesis and blood flow. Our study disclosed that ghrelin exhibits a strong anti-inflammatory and healing effect in acetic acid-induced colitis. Our current observation in association with previous findings that ghrelin exhibits curative effect in trinitrobenzene sulfonic acid- and dextran sodium sulfate-induced colitis suggest that therapeutic effect of ghrelin in the colon is universal and independent of the primary cause of colitis.     

Theoretical study of the human bradykinin-bradykinin B2 receptor complex

The interaction of bradykinin (BK) with the bradykinin B2 receptor (B2R) was analyzed by using molecular modeling (MM) and molecular dynamics (MD) simulations. A homology model for B2R has been generated and the recently determined receptor-bound solid-state NMR spectroscopic structure of BK (Lopez et al., Angew. Chem. 2008, 120, 1692-1695; Angew. Chem. Int. Ed. 2008, 47, 1668-1671) has been modeled into the binding pocket of the receptor to probe the putative ligand-receptor interface. The experimental hormone structure fitted well into the binding pocket of the receptor model and remained stable during the MD simulation. We propose a parallel orientation of the side chains for Arg1 and Arg9 in BK that is bound to B2R. The MD simulation study also allows the conformational changes that lead to the activated form of B2R to be analyzed. The hydrogen bond between N140 (3.35) and W283 (6.48) is the key interaction that keeps the receptor in its inactive form. This hydrogen bond is broken during the MD simulation due to rotation of transmembrane helix 3 (TM3) and is replaced by a new hydrogen bond between W283 (6.48) and N324 (7.45). We propose that this interaction is specific for the activated form of the bradykinin B2 receptor. Additionally, we compared and discussed our putative model in the context of the structural model of the partially activated rhodopsin (Rh*) and with the known biochemical and structural data.     

Solution blow spinning: A new method to produce micro‐ and nanofibers from polymer solutions

A solution blow spinning technique was developed using elements of both electrospinning and melt blowing technologies as an alternative method for making non‐woven webs of micro‐ and nanofibers with diameters comparable with those made by the electrospinning process with the advantage of having a fiber production rate (measured by the polymer injection rate) several times higher. The diameters of fibers produced ranged from 40 nm for poly(lactic acid) to several micrometers for poly(methyl methacrylate). This solution blow spinning method uses a syringe pump to deliver a polymer solution to an apparatus consisting of concentric nozzles whereby the polymer solution is pumped through the inner nozzle while a constant, high velocity gas flow is sustained through the outer nozzle. Analysis of the process showed that pressure difference and shearing at the gas/solution interface jettisoned multiple strands of polymer solution towards a collector. During flight, the solvent component of the strands rapidly evaporates forming a web of micro and nanofibers. The effect of injection rate, gas flow pressure, polymer concentration, working distance, and protrusion distance of the inner nozzle was investigated. Polymer type and concentration had a greater effect on fiber diameter than the other parameters tested. Injection rate, gas flow pressure, and working distance affected fiber production rate and/or fiber morphology. Fibers were easily formed into yarns of micro‐ and nanofibers or non‐woven films that could be applied directly onto biological tissue or collected in sheets on a rotating drum. Indeed, virtually any type of target could be used for fiber collection. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009