Fuzzy parametric programming model for multi-objective integrated solid waste management under uncertainty

Solid waste management is increasingly becoming a challenging task for the municipal authorities due to increasing waste quantities, changing waste composition, decreasing land availability for waste disposal sites and increasing awareness about the environmental risk associated with the waste management facilities. The present study focuses on the optimum selection of the treatment and disposal facilities, their capacity planning and waste allocation under uncertainty associated with the long-term planning for solid waste management. The fuzzy parametric programming model is based on a multi-objective, multi-period system for integrated planning for solid waste management. The model dynamically locates the facilities and allocates the waste considering fuzzy waste quantity and capacity of waste management facility. The model addresses uncertainty in waste quantity as well as uncertainties in the operating capacities of waste management facilities simultaneously. It was observed that uncertainty in waste quantity is likely to affect the planning for waste treatment/disposal facilities more as compared with the uncertainty in the capacities of the waste management facilities. The relationship between increase in waste quantity and increase in the total cost/risk involved in waste management is found to be nonlinear. Therefore, it is possible that a marginal change in waste quantity could increase the total cost/risk substantially. The information obtained from the analysis of modeling results can be effectively used for understanding the effect of changing the priorities and objectives of planning decisions on facility selections and waste diversions.     

In situ synthesis of gold–polyaniline composite in nanopores of polycarbonate membrane

In situ one-step chemical synthesis route for the preparation of a gold–polyaniline composite in nanopores of polycarbonate (PC) membrane is reported. PC membrane, which was placed in a specially designed two-compartment cell, separated the aqueous solution of aniline from HAuCl₄ solution. Concentration gradient across the membrane caused movement of AuCl₄ ⁻ and anilinium ions in the pores of polycarbonate membrane. Nanopores in PC membrane acted as reaction vessels where aniline and HAuCl₄ were allowed to mix together, and the redox reaction between aniline and HAuCl₄ led to the formation of gold–polyaniline composite. The gold–polyaniline composite in PC membrane was characterised by EDXRF, XRD, UV–Vis spectroscopy, FTIR and TEM. Peak broadening in XRD suggests that Au particles formed in the membrane are nanocrystallites and average crystallite size is (24 ± 4) nm. TEM studies show that gold nanoparticles are randomly dispersed in polyaniline clusters formed in the nanopores of PC membrane. Characterisation results show that the surfaces of the PC membrane exposed to HAuCl₄ and aniline have significantly higher concentrations of Au nanoparticles and polyaniline, respectively.     

Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I—Experimental Studies

Experimental studies were performed to investigate the role and influence of grain movement on macrosegregation and microstructure evolution during equiaxed solidification. Casting experiments were performed with a grain-refined Al-Cu alloy in a rectangular sand mold. For the aluminum alloy studied, the equiaxed grains are lighter than the bulk melt and thus float up. Experiments were designed to investigate floatation phenomena of equiaxed grains in the presence of thermosolutal convection. Cooling curves were recorded at key locations in both the casting and the chill. Quantitative image analysis and spatial chemical analysis were performed on the solidified casting to observe the chemical and microstructural inhomogeneity created by the melt convection and solid floatation. Several notable features that can be attributed to grain movement were observed in temperature histories, macrosegregation patterns, and microstructures. In our experiments, the floatation of grains influences the thermal conditions and the overall flow direction in the casting cavity. In some cases, the induced flow resulting from the grain movement caused a flow reversal. This in turn influences the solidification direction, microstructure evolution, and the overall macrosegregation behavior.     

Thermal performance and embodied energy analysis of a passive house – Case study of vault roof mud-house in India

This paper investigates thermal performance of an existing eco-friendly and low embodied energy vault roof passive house (or mud-house) located at Solar Energy Park of IIT Delhi, New Delhi (India). Based on embodied energy analysis, the energy payback time for the mud-house was determined as 18 years. The embodied energy per unit floor area of R.C.C. building (3702.3 MJ/m²) is quiet high as compared to the mud-house (2298.8 MJ/m²). The mud-house has three rooms with inverted U-shape roof and remaining three rooms with dome shape roof. A thermal model of the house consisting of six interconnected rooms was developed based on energy balance equations which were solved by using fourth order Runge Kutta numerical method. The predicted six room air temperatures were found in good agreement with the experimental observed data on hourly basis in each month for one year. The annual heating and cooling energy saving potential of the mud-house was determined as 1481 kW h/year and 1813 kW h/year respectively for New Delhi composite climate. The total mitigation of CO₂ emissions due to both heating and cooling energy saving potential was determined as 5.2 metric tons/year. The annual carbon credit potential of mud-house was determined as € 52/year. Similar results were obtained for the different climatic locations in India.     

Deep defect determination by the constant photocurrent method (CPM) in annealed or light soaked amorphous hydrogenated silicon (a-Si:H)

We present systematic measurements of CPM on two independent series of slightly phosphorous and boron doped films. For “n-type” samples of both series, the CPM deep defect absorption is proportional to the square root of the gas dopant ratio. For these samples we discuss the influence of Fermi level on the CPM spectra. For slightly “p-type” samples, CPM deep defect absorption as evaluated by CPM becomes higher than the corresponding PDS-values. This fundamental problem can be traced back to the violation of two basic conditions necessary for a correct evaluation of the absorption from CPM measurements: (1) the power law exponent γ (Rose factor) of the photoconductivity must be spectrally independent, and (2) the generation rate G, which corresponds to the CPM photocurrent, also has to be spectrally independent. Further, we compare the annealed and the “saturated” light soaked states of selected slightly doped samples and an undoped sample: the variations in the CPM deep defect absorption and in photoconductivity due to light-soaking are discussed.     

A compact uniplanar ACS fed multi band low cost printed antenna for modern 2.4/3.5/5 GHz applications

Microsystem Technologies - A uniplanar compact triple operating band asymmetric coplanar strip (ACS) fed printed antenna loaded with multiple L-shaped branches and the asymmetric rectangular ground...     

Comparative Analysis of Double Gate Junction Less (DG JL) and Gate Stacked Double Gate Junction Less (GS DG JL) MOSFETs

Semiconductors - The quest for downscaling of devices has led to novel configurations with better performance parameters of which Junction Less (JL) MOSFET is an important configuration regarding...     

Acrylic Homo- and Co-polymers Based on 2, 4-dichlorophenyl Methacrylate and 8-quinolinyl Methacrylate

The monomer 2, 4-dichlorophenyl methacrylate (2,4-DMA) was synthesized from 2, 4-dichlorophenol and characterized by conventional methods. The homopolymers of 2,4-dichlorophenyl methacrylate and its copolymers with 8-quinolinyl methacrylate (8-QMA) in different feed ratio were prepared by free radical polymerization using dimethyl formamide (DMF) as a solvent and 2,2-azobis iso butyronitrile (AIBN) as an initiator. The resulting polymers were characterized by using IR spectroscopy. Reactivity ratios of monomer were evaluated using UV-spectroscopy. Average molecular weights and polydispersity were determined by gel permeation chromatography (GPC). Solution viscosity was also obtained. The thermal analysis was carried out using TGA and DSC. The homo- and co-polymers were also tested for their antimicrobial properties against selected microorganism. The metal ion uptake capacity of synthesized copolymers was estimated by batch equilibration method using different metal ion solution under different experimental conditions. It is observed that due to the presence of pendant ester bound quinoline group, the copolymers are capable of adsorbing cations from their aqueous solution.     

Effect of boric acid on thermal dehydrogenation of ammonia borane: H2 yield and process characteristics

We have recently demonstrated that boric acid (H₃BO₃, BA) is a promising additive to decrease onset temperature as well as to enhance hydrogen release kinetics for thermolysis of ammonia borane (NH₃BH₃, AB). The observations suggest that tetrahydroxyborate ion released by heating BA serves as Lewis acid and catalyzes AB dehydrogenation. Using this approach, we obtained high H₂ yield at 85°C, along with rapid kinetics. Various operating conditions were investigated, such as reactor temperature, AB wt %, and particle size of BA. Even in the presence of 10 wt % BA, high H₂ yield (13 wt %) and trace amount of ammonia (10–20 ppm) were obtained at 80°C, proton exchange membrane (PEM) fuel cell operating temperature. To our knowledge, such H₂ yield value is higher than from any other method using AB with additive or catalyst at PEM fuel cell operating temperatures. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3359–3364, 2013