Electrochemical properties of carbon-coated CaWO4 versus Li

Carbon-coated CaWO₄ nano-crystalline phases have been synthesized by ambient temperature solution precipitation method, characterized by X-ray diffraction, SEM and thermogravimetry and their electrochemical properties were studied versus Li metal. Galvanostatic cycling at a current of 60 mA/g in the voltage range 0.005-3.0 V on the 5 wt.% C-coated CaWO₄ gave a reversible capacity of 230 ± 5 mAh/g corresponding to 2.5 mol of Li, which is almost stable from 20 to 50 cycles. Under the same conditions, the 10 wt.% C-coated CaWO₄ showed a capacity of 355 ± 5 mAh/g (3.8 mol of Li) during the initial cycles, but the capacity degraded at a rate of 1.6 mAh/g per cycle in the range 5-100 cycles. A good operating voltage range was found to be 0.005-3.0 V with average discharge and charge potentials being 0.6 and 1.3 V, respectively. Coulombic efficiency in all cases was 96-98%. Cyclic voltammograms compliment the galvanostatic results. Impedance spectral data on the 10 wt.% C-coated CaWO₄ at different voltages during the first and 20th discharge-charge cycle have been interpreted in terms of the variations in the bulk and charge-transfer resistances of the composite electrode. A reaction mechanism involving the formation/decomposition of the oxide bronze, ‘Li_xWO_y’ has been proposed to explain the electrochemical cycling.     

A Scenario Based Impact Assessment of Trace Metals on Ecosystem of River Ganges Using Multivariate Analysis Coupled with Fuzzy Decision-Making Approach

The growing consciousness about the health risks associated with environmental pollutants has brought a major shift in global concern towards prevention of hazardous/trace metals discharge in water bodies. Majority of these trace metals gets accumulated in the body of aquatic lives, which are considered as potential indicators of hazardous content. This results in an ecological imbalance in the form of poisoning, diseases and even death of fish and other aquatic lives, and ultimately affect humans through food chain. Trace metals such as Cd, Cr, Cu, Mn, Ni, Pb and Zn originated from various industrial operations containing metallic solutions and agricultural practices, have been contributing significantly to cause aquatic pollution. The present study develops a novel approach of expressing sustainability of river’s ecosystem based on health of the fish by coupling fuzzy sensitivity analysis into multivariate analysis. A systematic methodology has been developed by generating monoplot, two dimensional biplot and rotated component matrix (using ‘Analyze it’ and ‘SPSS’ software), which can simultaneously identify critical trace metals and their industrial sources, critical sampling stations, and adversely affected fish species along with their interrelationships. A case study of assessing the impact of trace metals on the aquatic life of river Ganges, India has also been presented to demonstrate effectiveness of the model. The clusters pertaining to various water quality parameters have been identified using Principal Component Analysis (PCA) to determine actual sources of pollutants and their impact on aquatic life. The fuzzy sensitivity analysis reveals the cause-effect relationship of these critical parameters. The study suggests pollution control agencies to enforce appropriate regulations on the wastewater dischargers responsible for polluting river streams with a particular kind of trace metal(s).     

Design of novel compact anti-stiction and low insertion loss RF MEMS switch

A novel torsional RF MEMS capacitive switch design on silicon substrate is presented. The optimized switch topology such as reduction in up-state capacitance results in insertion loss better than ?0.1 dB till 20 GHz. Off to on state capacitance ratio is also improved by 18 fold and isolation is better than ?43 dB at 9.5 GHz. The achieved on state return loss is ?38 dB as compared to ?21 dB at 9.5 GHz. An optimized reduction in contact area and use of floating metal layer increases the switching speed from 56 to 46 μsec. It also increases the switch reliability by alleviating the stiction.     

Scientific basis for establishing country greenhouse gas estimates for rice-based agriculture: An Indian case study

A comprehensive scientific assessment of CH₄ budget estimation for Indian rice paddies, based on a decade of measurements in India, is presented. Indian paddy cultivation areas contain soils that have low to medium levels of soil organic carbon. The average seasonally integrated CH₄ flux (E _sif) values calculated from these measurements were 15.3 ± 2.6 g m^–2 for continuously flooded (CF), 6.9 ± 4.3 g m^–2 for intermittently flooded (IF) single aeration (SA) and 2.2 ± 1.5 g m^–2 for IF multiple aeration (MA) rice ecosystems. For CF and IF (MA) rice ecosystems having high soil organic carbon, without organic amendments, the CH₄ flux (E _sif) may be increased by 1.7 times relative to low soil organic carbon, whereas it may enhance by 5.3 for CF if amended organically. Organic amendment and high soil organic carbon paddy areas do not alter the methane budget estimates for India (3.6±1.4 TgY^–1) much, due to their small paddy harvested area. Methane estimated using average emission factors (E _sif) for all paddy water regimes, which include harvested areas having soils with high organic carbon and organic amendments, may give a budget of 5 TgY^–1 for India.     

Mussoorrie rock phosphate-pyrite mixture as phosphate fertilizer

Mussoorrie rock phosphate (MRP), MRP + pyrite (25% by weight), diammonium phosphate (DAP), ammonium polyphosphate (APP) and nitrophosphate (NP) were compared in a field experiment as fertilizers for wheat. At 20 kg P ha^–1, MRP was only 6 per cent as effective as DAP. However, when it was mixed with pyrite, the efficiency of MRP increased to 64 per cent at 20 kg P ha^–1 compared with 97 per cent at 40 kg P ha^–1. The P requirement for a targeted yield for 4.5 t ha^–1 decreased from 39.4 kg P ha^–1 as MRP to 23.7 kg P ha^–1 as MRP + pyrite. Of the other P fertilizers studied, NP was as effective as DAP, whereas APP was 9 to 37 per cent more effective than DAP. However, the P requirement as DAP, NP and APP for a targeted yield of 4.5 t ha^–1 was similar (11 ± 0.5 kg P ha^–1).     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Processing of mesocarbon microbeads to high-performance materials: Part II. Reaction bonding by in situ silicon carbide and nitride formation

The processing of carbon-ceramic composites by utilizing the unique sintering ability of mesocarbon microbeads (MCMB) is reported. The ceramic constituents (silicon nitride and silicon carbide) are formed in situ by reactions between MCMB and silicon in different atmospheres. In comparison with direct addition of ceramic (SiC, Si₃N₄) phases, in situ formation shows several appealing features. By inducing the reaction of silicon with MCMB, the sintering ability of the composite is enhanced via reaction bonding mechanisms. Similarly, it is demonstrated that composite porosity is limited owing to silicon reaction with nitrogen. The reactive formation of nanoscale ceramic reinforcements via decomposition of the silicon-containing polymer (e.g. poly-carbomethyl-silane) is also reported. This approach results in formation of uniform nanosized (>100 nm) SiC layers strongly bonded to the surface of the carbon particles. The presented results contribute to the development of carbon-ceramic materials with high-operational properties.     

Graft copolymerzation of poly(vinyl chloride) with styrene. I. Synthesis and characterization

Graft copolymerization of poly(vinyl chloride) (PVC) partially dehydrochlorinated by heating in nitrobenzene was investigated using styrene as monomer and anhydrous AlCl₃ as cationic initiator in the temperature range of 0–35°C. Effect of monomer, catalyst, and PVC concentration on % graft-on was also evaluated. Introduction of labile sites in PVC by partial dehydrochlorination in nitrobenzene resulted in an increase in % graft-on. Intrinsic viscosity of PVC–g–polystyrene in THF initially increased with an increase in % graft-on. At higher % graft-on a decrease in [η] was observed.     

Toughened electrospun nanofibers from crosslinked elastomer‐thermoplastic blends

A crosslink‐able elastomeric polyester urethane (PEU) was blended with a thermoplastic, polyacrylonitrile (PAN), and electrospun into nanofibers. The effects of the PEU/PAN ratio and the crosslinking reaction on the morphology and the tensile properties of the as‐spun fiber mats were investigated. With the same overall polymer concentration (9 wt %), the nanofiber containing higher composition of PEU shows a slight decrease in the average fiber diameter, but the tensile strength, the elongation at break and tensile modulus of the nanofiber mats are all improved. These tensile properties are further enhanced by slight crosslinking of the PEU component within the nanofibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007