用椰壳制活性炭吸附去除三价铋离子(英文)

In present study,we report the preparation of coconut shell activated carbon as adsorbent and its appli-cation for Bi(Ⅲ) removal from aqueous solutions.The developed adsorbent was characterized with scanning elec-tron microscope(SEM),Fourier Transform Infrared(FTIR),C,H,N,S analyzer,and BET surface area analyzer.The parameters examined include agitation time,initial concentration of Bi(Ⅲ),adsorbent dose and temperature.The maximum adsorption of Bi(Ⅲ)(98.72%) was observed at 250 mg·L-1 of Bi(Ⅲ) and adsorbent dose of 0.7 g when agitation was at 160 r·min-1 for 240 min at(299±2) K.The thermodynamic parameters such as Gibb’s free energy(△Gθ),enthalpy(△Hθ) and entropy(△Sθ) were evaluated.For the isotherm models applied to adsorption study,the Langmuir isotherm model fits better than the Freundlich isotherm.The maximum adsorption capacity from the Langmuir isotherm was 54.35 mg?g?1 of Bi(Ⅲ).The kinetic study of the adsorption shows that the pseudo second order model is more appropriate than the pseudo first order model.The result shows that,coconut shell ac-tivated carbon is an effective adsorbent to remove Bi(Ⅲ) from aqueous solutions with good adsorption capacity.     

Spectroscopic and Simulation Analysis of Facile PEDOT:PSS Layer Deposition-Silicon for Perovskite Solar Cell

In this research work, we have characterized and simulated a well-known hole transport material (HTM) for perovskite solar cell (PSC) and conductive polyme     

Enhancement in the limit of detection of lab-on-chip microfluidic devices using functional nanomaterials

Technological developments in recent years have witnessed a paradigm shift towards lab-on-chip devices for various diagnostic applications. Lab-on-chip technology integrates several functions typically performed in a large-scale analytical laboratory on a small-scale platform. These devices are more than the miniaturized versions of conventional analytical and diagnostic techniques. The advances in fabrication techniques, material sciences, surface modification strategies, and their integration with microfluidics and chemical and biological-based detection mechanisms have enormously enhanced the capabilities of these devices. The minuscule sample and reagent requirements, capillary-driven pump-free flows, faster transport phenomena, and ease of integration with various signal readout mechanisms make these platforms apt for use in resource-limited settings, especially in developing and underdeveloped parts of the world. The microfluidic lab-on-a-chip technology offers a promising approach to developing cost-effective and sustainable point-of-care testing applications. Numerous merits of this technology have attracted the attention of researchers to develop low-cost and rapid diagnostic platforms in human healthcare, veterinary medicine, food quality testing, and environmental monitoring. However, one of the major challenges associated with these devices is their limited sensitivity or the limit of detection. The use of functional nanomaterials in lab-on-chip microfluidic devices can improve the limit of detection by enhancing the signal-to-noise ratio, increasing the capture efficiency, and providing capabilities for devising novel detection schemes. This review presents an overview of state-of-the-art techniques for integrating functional nanomaterials with microfluidic devices and discusses the potential applications of these devices in various fields.     

pH-Responsive and Reversible A-Motif-Based DNA Hydrogel: Synthesis and Biosensing Application**

Functional DNA hydrogels with various motifs and functional groups require perfect sequence design to avoid cross-bonding interference with themselves or other structural sequences. This work reports an A-motif functional DNA hydrogel that does not require any sequence design. A-motif DNA is a noncanonical parallel DNA duplex structure containing homopolymeric deoxyadenosines (poly-dA) strands that undergo conformation changes from single strands at neutral pH to a parallel duplex DNA helix at acidic pH. Despite this and other advantages over other DNA motifs like no cross-bonding interference with other structural sequences, the A-motif has not been explored much. We successfully synthesized a DNA hydrogel by using an A-motif as a reversible handle to polymerize a DNA three-way junction. The A-motif hydrogel was initially characterized by electrophoretic mobility shift assay, and dynamic light scattering, which showed the formation of higher-order structures. Further, we used imaging techniques like atomic force microscopy and scanning electron microscope to validating its hydrogel like highly branched morphology. pH-induced conformation transformation from monomers to gel is quick and reversible, and was analysed for multiple acid-base cycles. The sol-to-gel transitions and gelation properties were further examined in rheological studies. The use of the A-motif hydrogel in the visual detection of pathogenic target nucleic acid sequence was demonstrated for the first time in a capillary assay. Moreover, pH-induced hydrogel formation was observed in situ as a layer over the mammalian cells. The proposed A-motif DNA scaffold has enormous potential in designing stimuli-responsive nanostructures that can be used for many biological applications.     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002     

Study of crystal structure,dielectric, magnetic and magnetoelecrtic properties of xCoFe2O4-(1-x)Na0.5Bi0.5TiO3 composites

Multiferroic composites of spinel ferrite and ferroelectric xCoFe₂O₄ – (1-x)Na_0.5Bi_0.5TiO₃ (with x = 0.10,0.30,0.50) were efficiently prepared by standard solid state reaction mechanism. X-ray diffractometer was used to analyze crystal structure of the prepared composites. The observed XRD patterns of the composites comprise peaks of both the phases i.e. ferrite and ferroelectric, with no sign of secondary peaks. Rietveld refinement of XRD data further confirms the coexistence of these two phases with cubic (Fd3m) and rhombohedral (R3c) symmetry corresponding to ferrite and ferroelectric phase respectively. The 3-dimensional overview of crystal structure of pure CoFe₂O₄ and Na_0.5Bi_0.5TiO₃ and of composite 0.50CoFe₂O₄?0.50Na_0.5Bi_0.5TiO₃ is generated by using refined parameters. The dielectric constant (ε´) and dielectric loss (tanδ) values were recorded as a function of frequency ranging from 100?Hz to 7?MHz and at different temperatures. Both ε´ and tanδ follow dispersion pattern at lower frequencies while show frequency independent behavior at higher frequencies. The magnetic evaluation carried by analyzing M-H hysteresis loop reveals the ferrimagnetic characteristics of these composites. The highest value of magnetic moment is 1.12μ_B observed for composite 0.50CoFe₂O₄ – 0.50Na_0.5Bi_0.5TiO_3. Magnetoelectric (ME) voltage coefficient (α) was also demonstrated to observe the interaction between ferrite and ferroelectric phases. The highest value of α (72.72μV/Oe cm) is obtained for low ferrite composition 0.10CoFe₂O₄ – 0.90Na_0.5Bi_0.5TiO₃, which suggests the dependence of magnetoelectric response on the resistivity of the composites.     

Modeling of Multiphase Transport during Drying of Honeycomb Ceramic Substrates

Multiphase transport model to simulate drying of honeycomb ceramic substrates in a conventional (hot air) drier is developed. Heat and moisture transport in the honeycomb walls as well as channels is modeled. The model predictions are validated against experiments done for drying of cylinder-shaped substrates by comparing histories and axial profiles of moisture loss and point temperature histories at various locations. Drying experiments are performed at two different values of air temperature, 103°C and 137°C, at a relative humidity value of 5%. Sensitivity analysis reveals that the drying process is controlled by heat and water vapor transport. External heat transfer is the dominant resistance mechanism for energy transport, whereas internal convection and binary diffusion dominate the resistance to vapor transport.     

Modeling and Control of a Titania Aerosol Reactor

We focus on modeling and control of an aerosol flow reactor used to produce titania powder. We initially present a detailed population balance model for the process which accounts for simultaneous nucleation, Brownian and shearinduced coagulation, and convective transport and describe the spatio-temporal evolution of the aerosol volume distribution. Then, under the assumption of lognormal aerosol volume distribution, the method of moments is employed for the derivation of a model that describes the evolution of the three leading moments of the volume distribution. The moment model, together with the fundamental model that describes the temperature in the reactor and concentrations of the gas-phase species, are subsequently used to synthesize a nonlinear output feedback controller which manipulates the temperature of the reactor wall to achieve an aerosol size distribution in the outlet of the reactor with desired geometric average particle diameter. The nonlinear controller is successfully implemented on the process model and is shown to deal effectively with external disturbances.     

Inhibitive effect of diethylcarbamazine on the corrosion of mild steel in hydrochloric acid

Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), weight loss measurements and atomic force microscopy techniques were used to investigate the inhibitory effect of diethylcarbamazine (DECM) on corrosion of mild steel in HCl solution. The inhibitor showed >90% inhibition efficiency at 5.01 × 10⁻⁴ M. Results obtained revealed that inhibition occurs through adsorption of inhibitor molecules on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization studies suggested that it is a mixed type inhibitor, predominantly controls cathodic reaction. Activation parameters (E_a, ΔH and ΔS) and thermodynamic parameters (, and ) were calculated to investigate mechanism of inhibition.     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...