Basic trends in development of drilling equipment for ore mining with block caving method

The authors have determined the causes of drop in performance of induced block caving using fans of blastholes 105 mm in diameter and single blastholes 250 mm in diameter, as well as the sources of increased drilling cost and expansion of start-up time of production blocks in Abakan underground mine. Alternatives of improvement in drilling efficiency under current conditions are discussed.     

Thin-Film Nanotechnology for Power Sources

Russian Engineering Research - Thin-film vacuum technology permits the creation of new electrode materials on the basis of a flexible carbon matrix with a highly developed surface. Supercapacitor...     

Results from Survey and Geotechnical Monitoring on Test Site No. 3 of the Zagorsk PSP-2

Power Technology and Engineering - The major results from the survey and geotechnical monitoring during the leveling of the model foundation of the Zagorsk PSP-2 in test site No. 3 are presented....     

Tuning the Operating Band of an Artificial Magnetic Conductor

Journal of Communications Technology and Electronics - Approximate formulas for calculating the coefficient of reflection from an artificial magnetic conductor (AMC) based on a capacitive lattice...     

Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Experience of Using the Home-Made Monitron Automated Hydrostatic-Leveling System for Monitoring of Hydraulic Structures

Power Technology and Engineering - The monitoring of hydraulic structures as high-risk facilities is discussed. Monitoring should ensure the reliability and functioning of a hydraulic structure...     

Dissolution of Metal Oxides in a Choline Chloride–Sulphosalicylic Acid Deep Eutectic Solvent

Theoretical Foundations of Chemical Engineering - A choline chloride–sulfosalicylic acid deep eutectic solvent (DES) is proposed for dissolving the oxides Co(II), Cu(II), Zn(II), Fe(III),...     

Calculation and Experimental Determination of the Neutronics Characteristics of the IRT-T Research Reactor

Atomic Energy - The results of calculations and experimental determination of the neutronics characteristics of the IRT-T research reactor are presented. The IRT-T reactor is a pool reactor with...     

Ultrasonic Assisted Nano-structures of Novel Organotin Supramolecular Coordination Polymers as Potent Antitumor Agents

Journal of Inorganic and Organometallic Polymers and Materials - The reaction of potassium tetracyanocupprate(I) with triethyltin bromide in presence of phenanthroline (Phen) and quinoxaline (Qox)...     

Characterization of Aluminum Foam Impact Response

Strength of Materials - The paper addresses the investigation of high-strain rate compressive behavior of Al foams subjected to impact at the intermediate striking velocity ranged from 40 to...