Flexural response of hybrid carbon fiber thin cement composites

It is evident that the carbon-fiber-reinforced cementitious composites are being used in the structural and construction works owing to the synergetic action from two components viz. fiber and mortar matrix. Incorporation of a very nominal percentage of carbon fibers into a mortar mixture produces a strong and durable composite that leads the product of smart material properties. Flexural behavior of cement-based matrices carrying carbon fibers reinforcement of different percentage and size is studied in this paper. Influence of fiber content and length of the fiber is quantified using load–deflection curves. Specimens containing fiber of 0.0, 0.5, 1.0 and 1.5% with 3 mm (0.12 in.), 6 mm (0.36 in.), and their combination are prepared and tested. It is demonstrated that combination of 3 mm (0.12 in.) and 6 mm (0.36 in.) fibers enhances the bearing capacity to crack- and ultimate-stresses as well as the Young’s modulus of the fiber reinforced cement composites. The paper emphasizes the desired performances after the initiation of cracks and discusses the pre- and post-cracking load–deflection characteristics of the composites.     

A simulation model to study the impact of early information on design duration and redesign

In the design process, it is common to utilize early information from precedent activities to shorten the project duration instead of having to wait for the confirmed parameter values to arrive after full analysis. However, the estimated preliminary parameter might be different from that obtained after the full analysis. Consequently, redesign may be needed in downstream activities to correct this discrepancy. Total amount of induced redesign may adversely impact loss of productivity and overall design completion. Furthermore, redesign requires additional resources which may exaggerate the project completion for a project with limited resources. This study presents a simulation model to describe the effect of utilizing early information on redesign and total design duration. The paper characterizes the reduction in project duration while accounting for the impact of redesign through sensitivity studies of the parameters of the simulation model. The sensitivity studies would provide valuable insight that project managers can take into account when utilizing early information in design.     

Design formulations for non-welded and welded aluminium columns using Continuous Strength Method

Aluminium members are used in structural applications due to their high strength-to-weight ratio, corrosion resistance, attractive appearance, recyclability, ease of production and availability. Thin aluminium sections are susceptible to buckling at a relatively low stress and welding makes it even worse; the design stress i.e. 0.2% proof stress is almost halved in the vicinity of the heat affected zones (HAZs). Currently available design codes have their guidelines both for welded and non-welded aluminium columns, but the predictions for welded aluminium columns are often quite inconsistent. The current research exploits a newly developed strain based design approach the ‘Continuous Strength Method’ (CSM) to predict the behaviour of aluminium members with SHS and RHS cross-sections subjected to compression. A new design curve is proposed herein to predict the cross-sectional resistance in compression; this concept is further extended to propose a new Perry type buckling curve to predict the flexural buckling resistance of aluminium columns. A simplified technique is proposed to include the effect of heat affected zone (HAZ) in CSM formulations. The CSM predictions for aluminium columns are compared against those obtained using available guidelines proposed by the European, American and Australian/ New Zealand standards of aluminium structures. The CSM predictions for non-welded columns are in line with the code predictions, whilst the proposed simple technique for transversely welded columns seems to produce significantly improved predictions.     

Effects of mass transfer and free convection on the unsteady mhd flow past a vertical porous plate with constant suction

Effects of free convection currents and mass transfer on the unsteady flow of an electrically conducting and viscous incompressible fluid past an infinite vertical porous plate subjected to uniform suction, in the presence of transverse magnetic field, have been studied taking into account that the external flow velocity varies periodically with time in magnitude but not in direction. The effect of the induced magnetic field has been neglected. Approximate solutions to the transient flow, the amplitude and the phase of the skin-friction and the rate of heat transfer have been derived. During the course of the discussion, the effects of the Grashoff number Gr, the modified Grashoff number Gc (depending on the concentration difference), the Schmidt number Sc, the Eckert number Ec, the magnetic field parameter M, and the frequency ω have been discussed.     

Classifying Construction Contractors Using Unsupervised-Learning Neural Networks

Contractor prequalification involves the screening of contractors by a project owner to determine their competence to complete the project on time, within budget, and to expected quality standards. The process of prequalification involves a large number of contractors, each being represented by many attributes. A neural network model was applied to aid in the prequalification process by classifying contractors into groups based on similarity in performance using the financial ratios of liquidity, activity, profitability, and leverage. Contractors are represented in this model by patterns in four-dimensional space. Patterns of similar performance tend to form clusters intercepting regions of low pattern density in between. A neuron with weights is used as a classifier to set a decision boundary between clusters. The method basically iterates the neuron weights to move the decision boundary to a place of low pattern density. Then, the statistical hypothesis testing of the mean difference of two independent samples was used to validate the classification of the parent class to the two child classes considering the four ratios separately. The method was used hierarchically to classify a group of 245 contractors into classes of small numbers. Finally, the inferred procedure of classification proves that the neural network model classified the four-dimension pattern representing contractors efficiently.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Techno‐economic and environmental analysis for grid interactive solar photovoltaic power system of Lakshadweep islands

The Lakshadweep group of islands in Arabian Sea is one of the two major groups of islands in India. In these islands the main source of electricity is diesel generators, the diesel being transported from the main land to produce over 9 MW of electricity. Considering the remoteness of the island and the polluting nature of the existing plants, it is desirable to adopt a strategy to utilize available potential of non‐polluting renewable energy sources for these ecologically sensitive islands. A techno economic and environmental analysis for grid interactive solar photovoltaic power system of Union Territory of Lakshadweep islands is presented. This paper also examines the pollution aspect of power generation through Diesel Generator set and highlights the environmental benefits in using solar energy. Experiences of grid interactive solar photovoltaic power system installed recently in different islands are discussed and suggestions have been made for improving its efficiency and performance. Copyright © 2004 John Wiley & Sons, Ltd.     

Methane oxidative coupling over bismuth oxychloride-lithium carbonate-magnesia systems

The conversion of methane, the selectivity to C₂ hydrocarbons, and, particularly, the ethene-to-ethane ratio are much higher over BiOCl-Li₂CO₃-MgO than those over pure BiOCl and BiOCl-MgO. In addition, they remain almost the same over a period of 5 h for the former system, but decline significantly for the other two systems (BiOCl and 10% BiOCl-MgO). The XPS investigations provide some insight about the processes responsible for this behavior, indicating that not only Cl but also Bi is likely to play a role.