RADIATION EFFECTS ON MHD AXISYMMETRIC STAGNATION POINT FLOW TOWARDS A HEATED SHRINKING SHEET

In this article, a comprehensive numerical study of MHD axisymmetric stagnation point flow with radiation effects towards a heated shrinking sheet immersed in an electrically conducting incompressible viscous fluid in the presence of a transverse magnetic field is analyzed. The governing continuity, momentum, and heat equations together with the associated boundary conditions are first transformed to a set of self-similar nonlinear ordinary differential equations and are then solved by a method based on finite difference discretization. Some significant features of the flow and heat transfer in terms of normal and horizontal velocities and temperature field for various values of the governing parameters are analyzed, discussed, and presented through tables and graphs. The present investigations predict that the shear stresses increase and the thermal boundary layer becomes thinner by applying a strong magnetic field. The heat loss per unit area from the sheet decreases with an increase in the shrinking parameter. The thermal boundary layer thickness decreases with increasing values of the radiation parameter. The present results may be beneficial in flow and thermal control of polymeric processing.     

Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

Studies on Ambient Cured Biobased Mn(II), Co(II) and Cu(II) Containing Metallopolyesteramides

In this paper linseed oil based metallopolyesteramides (Mn(II)-/Co(II)-/Cu(II)-LPEA) containing metals [with half filled (d ⁵) and partially filled (d ⁷ and d ⁹) d orbitals] were synthesized via green route for the application of eco-friendly protective green material. This paper also described the role of occupancy of d orbitals on the performance of such polymers. The synthesis reaction was carried out in situ through condensation polymerization among linseed fatty amide diol (HELA), phthalic anhydride and respective metal acetates [M (OCOCH₃)₂; M = Mn(II), Co(II), Cu(II); different mole ratios] in absence of any harmful organic solvent. The structural determination (FTIR, ¹H-NMR and ¹³C-NMR), curing, thermal, physico-chemical, physico-mechanical, anticorrosive/chemical resistance, antibacterial properties of Mn(II)-/Co(II)-/Cu(II)-LPEA were carried out. The curing mechanism of the resin was confirmed by the comparison of FTIR spectra of uncured and cured resin. The curing mechanism of Mn(II)-/Co(II)-/Cu(II)-LPEA is found to be contrary to that of reported oil based polymer that involves the lipid autoxidation (slow process) in which driers are required to speed up the room temperature curing process. The incorporation of metals in Mn(II)-/Co(II)-/Cu(II)-LPEA improved the thermal stability as compared to virgin linseed oil based polyesteramide (LPEA). Mn(II)-/Co(II)-/Cu(II)-LPEA also show excellent antibacterial performance against Staphylococcus aureus and Escherichia coli. The observed diversity in material properties suggests that Mn-LPEA may be useful as an eco-friendly protective green material with thermal stability up to 320–330 °C.     

Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.     

Selective oxidation of olefins and aromatic alcohols with tert‐butylhydroperoxide catalyzed by polymer‐anchored transition‐metal complexes

Three polymer‐anchored metal complexes (Co, Cu, and Pd) were synthesized and characterized. The catalytic performance of these complexes was tested for the oxidation of olefins and aromatic alcohols. These complexes showed excellent catalytic activity and high selectivity. These complexes selectively gave epoxides and aldehydes from olefins and alcohols, respectively. Individually, the effect of various solvents, oxidants, substrate oxidant molar ratios, temperatures, and catalyst amounts for the oxidation of cyclohexene and benzyl alcohol were studied. Under optimized reaction conditions, 96, 81, and 71% conversions of cyclohexene and 86, 79, and 73% conversions of benzyl alcohol were obtained with Co(II), Cu(II), and Pd(II) catalysts, respectively. The catalytic results reveal that these complexes could be recycled more than five times without much loss in activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of poly(ε‐caprolactone)/clay nanocomposites using polyhedral oligomeric silsesquioxane surfactants as organic modifier and initiator

Poly(ε‐caprolactone)/clay nanocomposites were synthesized by in situ ring‐opening polymerization of ε‐caprolactone in the presence of montmorillonite modified by hydroxyl functionalized, quaternized polyhedral oligomeric silsesquioxane (POSS) surfactants. The octa(3‐chloropropyl) polyhedral oligomeric silsesquioxane was prepared by hydrolytic condensation of 3‐chloropropyltrimethoxysilane, which was subsequently quaternized with 2‐dimethylaminoethanol. Montmorillonite was modified with the quaternized surfactants by cation exchange reaction. Bulk polymerization of ε‐caprolactone was conducted at 110°C using stannous octoate as an initiator/catalyst. Nanocomposites were analyzed by X‐ray diffraction, transmission electron microscopy, thermo gravimetric analysis, and differential scanning calorimetry. Hydroxyl functionalized POSS was employed as a surface modifier for clay which gives stable clay separation for its 3‐D structure and also facilitates the miscibility of polymer with clay in the nanocomposites due to the star architecture. An improvement in the thermal stability of PCL was observed even at 1 wt % of clay loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

(11<Emphasis Type="Italic">Z</Emphasis>,13<Emphasis Type="Italic">E</Emphasis>)-Hexadecadien-1-yl Acetate: Sex Pheromone of the Grass Webworm <Emphasis Type="Italic">Herpetogramma licarsisalis</Emphasis>—Identification,Synthesis, and Field Bioassays

The grass webworm Herpetogramma licarsisalis (Lepidoptera: Crambidae), which has recently established in pasture in Northland, New Zealand, is an important pest of many tropical and subtropical grasses. Two pheromone components, (Z)-11-hexadecen-1-yl acetate (Z11–16:Ac) and (11Z,13E)-hexadecadien-1-yl acetate (Z11,E13–16:Ac), were identified in pheromone gland extracts of female moths by gas chromatography (GC), GC-electroantennographic detection, and GC-mass spectrometry in conjunction with microchemical tests (dimethyldisulfide and 4-methyl-1,2,4-triazoline-3,5-dione derivatizations). Z11,E13–16:Ac and its geometric isomer (11E,13Z)-hexadecadien-1-yl acetate (E11,Z13–16:Ac) were synthesized via stereoselective Wittig reactions, and the identity of the diene present in the pheromone glands was confirmed to be Z11,E13–16:Ac. Field bioassays at Indooroopilly in Brisbane, Australia, established that Z11,E13–16:Ac was necessary and sufficient for attraction of male grass webworm moths and that the corresponding alcohol, (11Z,13E)-hexadecadien-1-ol (Z11,E13–16:OH), had a strong inhibitory effect on trap catches at the ratios tested. When mixed with Z11,E13–16:Ac in various ratios, Z11–16:Ac had no effect on the attractiveness of lures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cellular Disulfide Bond Formation in Bioactive Peptides and Proteins

Bioactive peptides play important roles in metabolic regulation and modulation and many are used as therapeutics. These peptides often possess disulfide bonds, which are important for their structure, function and stability. A systematic network of enzymes—a disulfide bond generating enzyme, a disulfide bond donor enzyme and a redox cofactor—that function inside the cell dictates the formation and maintenance of disulfide bonds. The main pathways that catalyze disulfide bond formation in peptides and proteins in prokaryotes and eukaryotes are remarkably similar and share several mechanistic features. This review summarizes the formation of disulfide bonds in peptides and proteins by cellular and recombinant machinery.     

Co–Pd/γ‐Al2O3 catalyst for heavy oil upgrading: Desorption kinetics,reducibility and catalytic activity

The influence of Pd on a Co–Pd/γ‐Al₂O₃ heavy oil upgrading catalyst is investigated using different physicochemical and reactive Characterization techniques. Nitrogen adsorption isotherm analysis shows that the specific surface area and porosity of the support alumina is significantly decreased due to the blockage of the pores by the loaded cobalt species. The estimated activation energy of NH₃ desorption is found to be less for Co–Pd/γ‐Al₂O₃ sample, which confirms improved acidity due to Pd. TPR experiments show that the reducibility of the catalyst is significantly improved with the presence of Pd. Higher metal dispersion and hydrogen spillover effects are the main reasons for the enhanced reducibility of the Pd promoted catalyst as revealed by the H₂‐pulse chemisorptions study. When evaluated using VGO as feed stock, the Co–Pd/γ‐Al₂O₃ displayed superiority both in hydrodesulphurisation (HDS) and hydrocracking (HC) activities as compared to the unpromoted Co/γ‐Al₂O₃ catalyst. The coke deposition on the spent catalyst is also found to be low due to the Pd promotional effects. This is an encouraging result, given that higher hydrogenation activity of the catalyst can be achieved without compromising the cracking activity and sustained activity of the catalyst.     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry