Study on the common criteria methodology for secure ubiquitous environment construction

The ubiquitous environment has been developed since the extension of IT technology. The term ‘Ubiquitous’ is referred firstly by Mark Weiser, which means the user based environment that provides network service ‘any time, anywhere’. In the ubiquitous environment, the computing environment should have the device that recognizes the user and the environment. But there is not a verification process when dealing in sensitive information, and it may cause serious errors or malfunction. In order to complement the problem, members of the CCRA utilized CC(Common Criteria) to build up an assessment system and create a secured ubiquitous environment.     

Reliability analysis of TLP tethers under impulsive loading

In the present study, reliability assessment of Tension Leg Platform (TLP) tethers against maximum tension (i.e. tension exceeding yield) has been carried out under combined action of extreme wave and impulsive forces. For this purpose, a nonlinear dynamic analysis of TLP has been carried out in time domain. A limit state function for maximum tension (i.e. tension exceeding yield) has been derived employing Von-Mises theory of failure. Using this derived limit state function and responses obtained after dynamic analysis under sinusoidal, half-triangular and triangular impulsive forces, reliability assessment of the TLP tethers has been carried out. Design point, important for probabilistic design of tethers, has been located on the failure surface after solving a constrained optimization problem. To study the influence of various random variables on tether reliability, sensitivity analysis has been carried out. Effects of angle of impact; effect of variable submergence; and effect of material yield strength on tether reliability have also been studied on parametric basis. Effect of uncertainty on overall tether reliability has also been discussed to show the importance of quality control in the various design parameters.     

How Multirobot Systems Research will Accelerate our Understanding of Social Animal Behavior

Our understanding of social insect behavior has significantly influenced artificial intelligence (AI) and multirobot systems' research (e.g., ant algorithms and swarm robotics). In this work, however, we focus on the opposite question: "How can multirobot systems research contribute to the understanding of social animal behavior?" As we show, we are able to contribute at several levels. First, using algorithms that originated in the robotics community, we can track animals under observation to provide essential quantitative data for animal behavior research. Second, by developing and applying algorithms originating in speech recognition and computer vision, we can automatically label the behavior of animals under observation. In some cases the automatic labeling is more accurate and consistent than manual behavior identification. Our ultimate goal, however, is to automatically create, from observation, executable models of behavior. An executable model is a control program for an agent that can run in simulation (or on a robot). The representation for these executable models is drawn from research in multirobot systems programming. In this paper we present the algorithms we have developed for tracking, recognizing, and learning models of social animal behavior, details of their implementation, and quantitative experimental results using them to study social insects.     

Pressurised chamber design for conducting rolling contact experiments with liquid refrigerant lubrication

A novel pressurised chamber was designed to construct a special purpose test rig to achieve saturated liquid state of refrigerants for lubricated rolling contact fatigue experiments. Traditional bench testing using refrigerants as the lubricant is difficult due to the gaseous phase at standard atmospheric conditions. Pressurising the concentrated contact test chamber is therefore necessary to evaluate at a liquid state and therefore simulate practical applications. The gas/liquid phase transitions have a significant influence on the lubricant properties and hence wear mechanisms. It is necessary to modify the wear test conditions for the Hydrocarbon (HC) and Hydrofluorocarbon refrigerants to obtain realistic simulation of refrigerator compressor tests. The chamber design and test rig are described in this paper. A preliminary experimental study of the influence of the HC (R600a) on rolling wear of the silicon nitride (Si₃N₄)/steel elements using the pressurised chamber is presented. Rolling fatigue test methods are adopted to measure the wear performance of silicon nitride/steel bearing materials. In this case the rolling wear mechanisms of Si₃N₄ were measured using R600a refrigerant lubrication.     

Tapered microvalves fabricated by off-axis X-ray exposures

 A method for creating angled structures for use in microvalve devices applicable to control of liquid flow is presented. This technique utilizes a modified LIGA process with successive angled and rotated exposures into free standing acrylic sheets to form a tapered valve seat structure. These valve seats are integrated with bulk micromachined silicon diaphragms and tapered PMMA valve bosses to complete the microvalve. The long term goal of this research effort is to develop a normally-closed, low power, microfabricated valve for use in an implantable drug delivery system. This paper reports on the design and fabrication of microvalves using off-axis LIGA exposures. Flow testing and fluid handling characterization results are also presented. Received: 25 August 1997 Accepted: 22 October 1997     

Optimization of abrasive water jet cutting of ductile materials

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials: AISI 4340 (high strength low alloy steel, hardened to 49HRc) and Aluminum 2219. Analysis of Variance (ANOVA) was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.     

The Corrosion and Wear Performance of Microcrystalline WC-10Co-4Cr and Near-Nanocrystalline WC-17Co High Velocity Oxy-Fuel Sprayed Coatings on Steel Substrate

The study of near-nanocrystalline cermet composite coating was performed by depositing near-nanocrystalline WC-17Co powder using the high velocity oxy-fuel spraying technique. The WC-17Co powder consists of a core with an engineered near-nano-scale WC dispersion with a mean grain size 427 nm. The powder particle contains 6 wt pct of the ductile phase Co matrix mixed into the core to ensure that the reinforcing ceramic phase WC material is discontinuous to limit debridement during wear, while the remainder of the binding phase (11 wt pct) is applied as a coating on the powder particle to improve the ductility. The tribological properties of the coating, in terms of corrosion resistance, microhardness, and sliding abrasive wear, were studied and compared with those of an industrially standard microcrystalline WC-10Co-4Cr coating with a WC mean grain size 3 μm. Results indicated that the WC-17Co coating had superior wear and corrosion resistance compared to the WC-10Co-4Cr coating. The engineered WC-17Co powder with a duplex Co layer had prevented significant decarburization of the WC dispersion in the coating, thereby reducing the intersplat microporosity necessary for initiating microgalvanic cells. The improved wear resistance was attributed to the higher hardness value of the near-nanocrystalline WC-17Co coating.     

Automatic code generator for higher order integrators

Some explicit algorithms for higher order symplectic integration of a large class of Hamilton’s equations have recently been discussed by Mushtaq et al. Here we present a Python program for automatic numerical implementation of these algorithms for a given Hamiltonian, both for double precision and multiprecision computations. We provide examples of how to use this program, and illustrate behavior of both the code generator and the generated solver module(s).     

Mixture equations of state: Composition dependence

This paper discusses theoretical models for the composition dependence of equations of state and compares the quality of predictions against experimental thermodynamic property data. The mean density approximation (MDA) and the van der Waals one-fluid (VDW1) model are compared with hybrid mixing rules (HMR), in which rigorous composition dependence is used for the second and third virial coefficients and the conformai solution model is used for equation-of-state density terms beyond the third virial term. It is found that when values of unity are used for all binary and three-body unlike interaction parameters, calculated densities for methane-normal heptane mixtures have average absolute deviations of 3.54% for MDA, 4.04% for VDW1, and 2.59% for HMR. When vapor-liquid equilibrium calculations were performed for the methane-normal heptane system, average absolute deviations of calculatedK values from experimental values were 16.7% for methane and 36.4% for normal heptane using HMR, whereas when conformal solution model (CSM) mixing rules were used, the results were 34.8% for methane and 66.7% for normal heptane. When the binary interaction parameter for the characterization of interaction energies is determined, it is found to be less sensitive to state conditions in the case of HMR than either MDA or VDW1. These preliminary results suggest the potential of mixture equation-of-state methods which utilize rigorous composition dependence for the lower-order virial coefficients.Paper presented at the Second U.S.-Japan Joint Seminar on Thermophysical Properties, June 23, 1988, Gaithersburg, Maryland, U.S.A.     

Bed collapse dynamics of fluidized beds of nano-powder

Bed collapse experiments have been carried out in fluidized beds of agglomerated nano-powders possessing high void fractions. Transient responses for the local pressure-drop as well as the gas velocity during the collapse were recorded. From the local pressure transient data, occurrences of key events of the collapse dynamics were identified. The first event is the zero pressure-drop condition soon after the flow interruption while the second is the global minimum on the pressure-drop profile that marks the end of the first stage of the bed collapse characterized by fast bed transients. The second stage is a relatively slow process, which ends with the onset of the zero pressure-drop condition again (third event) that reflects particles becoming stationary, thus signaling the completion of the collapse dynamics. The time of the first stage of the collapse is found to vary linearly with the initial fluidization velocity at which the collapse experiment was initiated whereas the total collapse time shows a rather weak dependence on the fluidization velocity. On the other hand, the velocity transients during the collapse follow first-order time lag that can be accurately modeled using a single time constant irrespective of the initial fluidization velocity.