Cornet‐Like Phosphotriazine/Diamine Polymers as Reductant and Matrix for the Synthesis of Silver Nanocomposites with Antimicrobial Activity

The synthesis of silver nanoparticles attached on the surface of a hollow cornet‐like polymer matrix which served as a reductant and host matrix is described. This hybrid organic/inorganic macromolecular matrix is exhibiting anion‐exchange properties, porous structure and hollow morphologies, and absorptions in the visible light region. Due to the anion‐exchange property and the 3D orientation of the macromolecular chains the material is defining a new functional organic/inorganic hybrid. For the synthesis of nanoparticles, no other reducing agents were used and silver nanoparticles with a mean diameter of less than 20 nm were attached on the surface of the polymer, thus inheriting the composite with high antibacterial activity tested in bacterial strains and yeasts.

     

Analyzing and modeling the performance degradation of flash A/D converters due to substrate noise coupling

This paper presents a model to evaluate the impact of substrate noise on a CMOS regenerative comparator and moreover to predict the resulting performance degradation of a flash analog-to-digital (A/D) converter. The proposed approach initially relates substrate noise to the induced timing uncertainty of the comparator by means of an analytical linear model. In particular, the analysis first focuses on analyzing and expressing the resulting non-uniform sampling distortion in regenerative comparators in the presence of a deterministic ground bounce. Two sources of distortion are identified and evaluated: the input-dependent and the substrate noise-dependent one. For each error contributor, the analysis investigates two cases of timing error, based on the frequency correlation of the interfering signal with the sampling clock. The properties (number and power of distortion tones) of the sampling error spectrum are found to be highly dependent on the spectral content of the interfering signal and the sampling clock, while the model captures accurately the induced distortion. Subsequently, the linear model is extended to estimate the degradation of flash A/D converters and is utilized to predict the performance of practical flash and time-interleaved converters in the presence of substrate noise.     

Tocopherol and tocotrienol compositions of raw table olive fruit

The tocopherol (Tp) and tocotrienol (Tt) compositions of raw Greek olive fruit pericarp were determined by high-performance liquid chromatography. The following four types of fruit collected from three main varieties of olive trees were analysed: ‘Conservolea’ (green), ‘Halkidiki’ (green), ‘Conservolea’ (black) and ‘Calamon’ (black). α-Tp was found to be the predominant Tp in all types. The variety and stage of maturity influenced the Tp and Tt composition. β-Tp and α-Tt were found only in trace quantities in green olives. The same was true for α-Tp in all types and γ-Tp in ‘Conservolea’ (green). The calculated α-Tp equivalents (Tp and Tt compositions expressed as α-Tp according to their relative biological activities) were 21·6, 29·7, 36·8 and 39·4 μg g^?1 pericarp or 138, 132, 189 and 196 μg g^?1 lipid for ‘Conservolea’ (green), ‘Halkidiki’ (green), ‘Conservolea’ (black) and ‘Calamon’ (black), respectively.     

Reliability assessment of cutting tool life based on surrogate approximation methods

A novel reliability estimation approach to the cutting tools based on advanced approximation methods is proposed. Methods such as the stochastic response surface and surrogate modeling are tested, starting from a few sample points obtained through fundamental experiments and extending them to models able to estimate the tool wear as a function of the key process parameters. Subsequently, different reliability analysis methods are employed such as Monte Carlo simulations and first- and second-order reliability methods. In the present study, these reliability analysis methods are assessed for estimating the reliability of cutting tools. The results show that the proposed method is an efficient method for assessing the reliability of the cutting tool based on the minimum number of experimental results. Experimental verification for the case of high-speed turning confirms the findings of the present study for cutting tools under flank wear.     

Low Volume Bioreactor Development in Dairy Industry Based on Encapsulated Rennin in Tubular Cellulose/Starch Gel Composite

A novel process development is described in this study, based on a low volume bioreactor containing enzyme (rennin) encapsulated in a nano/micro porous cellulose (or tubular cellulose; TC) and starch gel matrix (TC/SG composite), for use in continuous coagulation of milk in cheese production. To validate the process, experiments were carried out in 10- and 50-L bioreactors. The biocatalyst (rennin immobilized in the TC/SG composite) proved to be efficient for continuous coagulation of milk. The biocatalyst was divided in four portions (filters) evenly distributed in the bioreactors, and high flow rate of milk was applied in order to avoid curd formation inside the bioreactors. Both bioreactor systems provided two economically useful results for the dairy industries: (i) substantial increase of milk coagulation productivity, (ii) acceleration of maturation of the produced cheeses, and (iii) reusability of the biocatalyst. Based on the results, it was estimated that a bioreactor of 1 m³ containing 20 kg of the TC/SG biocatalyst with encapsulated rennin could be used to treat 12,000 L of milk daily for cheese production. Physicochemical analyses of the produced cheeses at various stages of maturation were performed as well as analysis of aroma volatile compounds by SPME GC/MS. No significant differences were found compared to cheeses prepared with the traditional method.     

Convection in the Rayleigh-Bénard Flow with all Fluid Properties Variable

In the present paper,the effect of variable fluid properties(density,viscosity,thermal conductivity and specific heat) on the convection in the classical Rayleigh-Bénard problem is investigated.The investigation concerns water,air,and engine oil by taking into account the variation of fluid properties with temperature.The results are obtained by numerically solving the governing equations,using the SIMPLE algorithm and covering large temperature differences.It is found that the critical Rayleigh number incr...     

Cyclooxygenase Inhibition Alters Proliferative,Migratory, and Invasive Properties of Human Glioblastoma Cells In Vitro

Prostaglandin E₂ (PGE₂) is known to increase glioblastoma (GBM) cell proliferation and migration while cyclooxygenase (COX) inhibition decreases proliferation and migration. The present study investigated the effects of COX inhibitors and PGE₂ receptor antagonists on GBM cell biology. Cells were grown with inhibitors and dose response, viable cell counting, flow cytometry, cell migration, gene expression, Western blotting, and gelatin zymography studies were performed. The stimulatory effects of PGE₂ and the inhibitory effects of ibuprofen (IBP) were confirmed in GBM cells. The EP2 and EP4 receptors were identified as important mediators of the actions of PGE₂ in GBM cells. The concomitant inhibition of EP2 and EP4 caused a significant decrease in cell migration which was not reverted by exogenous PGE₂. In T98G cells exogenous PGE₂ increased latent MMP2 gelatinolytic activity. The inhibition of COX1 or COX2 caused significant alterations in MMP2 expression and gelatinolytic activity in GBM cells. These findings provide further evidence for the importance of PGE₂ signalling through the EP2 and the EP4 receptor in the control of GBM cell biology. They also support the hypothesis that a relationship exists between COX1 and MMP2 in GBM cells which merits further investigation as a novel therapeutic target for drug development.     

A physically based stochastic-deterministic procedure for the estimation of flood frequency

A procedure based on the method of derived distributions is proposed for the estimation of flood frequency from ungauged watersheds. The results of previous research on rainfall characteristics and watershed response are incorporated into the proposed procedure. These rainfall characteristics are storm depth, storm duration, space and time distribution. A simplified watershed model is used which has previously given good simulation of the watershed response. Some of the rainfall and watershed model parameters are stochastic in nature and are assumed to follow various probability distributions. Monte Carlo simulation is used for the generation of the various parameter values and simulation of the peak flow hydrographs. After 5000 realizations, the frequency of the hourly and daily peak flow and the flood volume is estimated. The proposed procedure is applied to eight coastal British Columbia watersheds and the results compare well with the observed data and with fitted probability distributions. The method is easy to apply, requires limited data and is shown to be reliable. Sensitivity analysis shows that the procedure is not very sensitive to uncertainty of the parameter values and is not dependent on the parameter probability distributions used.     

Exploring residential satisfaction in shrinking cities: a decision-tree approach

The number of cities experiencing population decline has been increasing worldwide. Despite the existence of theoretical propositions of shrinkage as an opportunity to increase levels of residential satisfaction, the issue has not been addressed empirically. This article contributes to fill this gap by assessing, through survey, the residential satisfaction of inhabitants of four shrinking Portuguese cities.

Data were analysed by means of a tree-decision approach: the Chi-squared Automatic Interaction Detection analysis. A sense of safety is the feature that best discriminates inhabitants’ level of residential satisfaction. The results show that shrinkage due to deindustrialisation processes is detrimental to residential satisfaction.     

Effects of chromium (VI) addition on the activated sludge process

The effect of hexavalent chromium, Cr(VI), addition on various operating parameters of activated sludge process was evaluated. To accomplish this, two parallel lab-scale continuous-flow activated sludge plants were operated. One was used as a control plant, while the other received Cr(VI) concentrations equal to 0.5, 1, 3 and 5 mgl(-1). Cr(VI) concentrations of 0.5 mgl(-1) caused significant inhibition of the nitrification process (up to 74% decrease in ammonia removal efficiency). On the contrary, the effect of Cr(VI) on organic substrate removal was minor for concentrations up to 5 mgl(-1), indicating that heterotrophic microorganisms are less sensitive to Cr(VI) than nitrifiers. Activated sludge floc size and structure characterization showed that Cr(VI) concentrations higher than 1 mgl(-1) reduced the filaments abundance, causing the appearance of pin-point flocs and free-dispersed bacteria. Additionally, the variability of protozoa and rotifers was reduced. As a result of disperse growth, effluent quality deteriorated, since significant amounts of suspended solids escaped with the effluent. Termination of Cr(VI) addition led to a partial recovery of the nitrification process (up to 57% recovery). Similar recovery signs were not observed for activated sludge floc size and structure. Finally, shock loading to the control plant with 5 mgl(-1) Cr(VI) for 2 days resulted in a significant inhibition of the nitrification process and a reduction in filamentous microorganisms abundance.