Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Electrical Inhomogeneity at the Mott Transition in the Band Width Controlled κ-(BEDT-TTF)2Cu[N(CN)2Br

The electronic phase separation on macroscopic scale is studied in the organic Mott system κ-(BEDT-TTF)₂Cu[N(CN)₂]Br by means of scanning microregion infrared spectroscopy using the synchrotron radiation. The phase separation appears in the vicinity of the Mott boundary in the single crystals of which the band width is controlled by partly substituting the BEDT-TTF molecule with the deuterated one. The transport properties under the phase separation are considered to be influenced by the percolation process of the domains.     

Effect of heparin on high glucose induced proliferation and expression of matrix metalloproteinases in normal human mesangial cells

Background The pathogenesis of diabetic nephropathy (DN) is a complex pathophysiological process. Its precise mechanism is not fully known. In recent years it has been recognized that synthesis of various extracelluar matrix (ECM) components may increase, and that degradation of ECM may decrease in DN. It was reported heparin could inhibit mesangial cells proliferation in vitro. The main aim of this study is to explore whether heparin inhibits proliferation of mesangial cells grown in high glucose concentration and to measure the effect of heparin on matrix metalloproteinases (MMPs) expression in mesangial cells. Methods The medium contained either low glucose (5 mmol/L) or high glucose (25 mmol/L). The concentrations of heparin in the culture medium were 0, 25, 50, 100, 200 or 400 μg/mL. A metabolic (WST-1) assay was used to measure mesangial cell proliferation and Western blot analysis was used to measure MMPs expression of mesangial cells. Results Normal human mesangial cell (NHMC) proliferation was higher in high glucose (HG) medium than in low glucose (LG) medium. They showed a 1.93 fold expansion after 72 h in high glucose in contrast to a 1.63 fold expansion in low glucose. In the presence of heparin, mesangial cells proliferation was inhibited, which was more obvious at high glucose concentrations than at low glucose concentrations. In high glucose, with heparin concentration of 50, 100, 200 and 400 μg/mL, the mesangial cells showed a 0.61 fold, 0.52 fold, 0.52 fold and 0.41 fold reductions in cell number compared to cells grown without heparin. In low glucose, only concentrations of 200 μg/mL and 400 μg/mL showed reduction in cell number, namely 0.54 fold and 0.45 fold, when compared to cells grown without heparin. In Western blot analysis, MMP₁, MMP₂, MMP₃ and MMP₉ was expressed by mesangial cells expressed in both high and low glucose concentrations, which was more prominent in high glucose medium. Incubation of heparin further increased expression of MMP₁, MMP₂, MMP₃ and MMP₉. Conclusions This study suggests that glucose can accelerate mesangial cell proliferation while heparin can reduce proliferation, being more obvious at high glucose concentrations. Higher glucose concentrations led to increased MMP expression, which may take part in the regulation of mesangial matrix synthesis and degradation. Addition of heparin resulted in a corresponding increase in MMP expression, most notably at high glucose concentrations, indicating a potentially renoprotective role in DN. Foundation item: Project (30370663) supported by the National Natural Science Foundation of China     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

1Introduction Themostimportantrequirementofapercutaneous deviceisthepreventionofbacterialinfectionthroughtheinterfacebetweenthematerialandtheskin.Therefore,a percutaneousdevicehastoadherefirmlytoskintissueandpreventepidermaldowngrowth.Previously,Aokietalp…     

A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Construction of ULT-MRI cryostat for ultra low temperature physics

No Heading We have constructed an Ultra Low Temperature cryostat for Magnetic Resonance Imaging (ULT-MRI) applicable for various condensed phases of ³He at ultra low temperature, such as Nuclear Ordered Solid ³He or superfluid ³He. In contrast to conventional MRI for general use, where a pulsed-field gradient method is commonly used, we used a steady-field gradient method to avoid eddy current heating to metal parts at ultra low temperature. To avoid nonlinear response from the nuclear ordered spin system, which contradicts a principle of conventional MRI, we employed Free Induction Decay (FID) after a small tipping angle RF pulse to obtain the spectrum.PACS numbers: 07.20Mc, 67.57.Lm, 67.80.Jd, 76.60.Pc, 83.85.Fg     

Development of specimen and test method for strength analysis of MEMS micromirror

Specimens and fracture test methods for strength analysis of MEMS micromirrors were proposed. Bending and combined loading tests were performed, and torsion strength was estimated from those results. Two-parameter Weibull distribution was used to evaluate the fracture stresses estimated from the FEM model. The resulting scale and shape parameters were 787 MPa and 7.77 for the bending test and 517 MPa and 5.28 for the combined loading test. There was a difference in strength between the results of the bending and combined loading tests. From the load factor analysis, it was found that both geometry and stress distribution have to be considered to estimate the strength of MEMS since flaws are non-uniformly distributed. It was also found that torsional strength can be estimated on the safe side using the results of the combined loading test.     

ISS experiments for the clarification of boiling and two-phase flow in microgravity and for the development of high-performance space cold plates

Inflow boiling, gravity effects on the distribution of both phases are observed in a heated tube and heat transfer coefficients due to two-phase forced convection is deteriorated in microgravity. In narrow channels between heated and unheated plates, the increase in subcooling enlarges a size of flattened bubble and reduces the frequency of detachment under microgravity conditions resulting the emphasis of heat transfer deterioration. To clarify reasons for the unknown behaviors of interfacial distribution and corresponding characteristics in heat transfer not easily be clarified through the experiments on ground, the opportunity on the experiments utilizing long-term microgravity duration realized in ISS is required. The experiments on microgravity boiling and two-phase flow are proposed by the collaboration of researchers in five countries. A common test loop is designed to conduct multiple experiments by the interchangeable structures of test sections; a transparent heated tube for the visualized flow boiling, a stainless tube for the measurement of CHF data, a copper surface for the heat transfer data of nucleate boiling with superimposed liquid flows in a duct, a glass heated plate with multiple array of small temperature sensors and transparent heaters for the clarification of mechanisms in nucleate boiling heat transfer, and one or two models of cold plates for practical applications. A direction of researches in the present discipline is proposed based on the existing experimental results and on the idea developed by the present authors.