Mass recovery adsorption refrigeration cycle—improving cooling capacity

The study investigates the performance of two-bed, silica gel-water adsorption refrigeration cycle with mass recovery process. The cycle with mass recovery can be driven by the relatively low temperature heat source. In an adsorption refrigeration cycle, the pressures in adsorber and desorber are different. The chiller with mass recovery process utilizes the pressure difference to enhance the refrigerant mass circulation. Cooling capacity and coefficient of performance (COP) were calculated by cycle simulation computer program to analyze the influences of operating conditions. The mass recovery cycle was compared with conventional cycle such as the single stage adsorption cycle in terms of cooling capacity and COP. The results show that the cooling capacity of mass recovery cycle is superior to that of conventional cycle and the mass recovery process is more effective for low regenerating temperature.     

Measurements of gamma-ray emission probabilities of 241, 243Am and 239Np

Gamma-ray emission probabilities of ^{241, 243}Am and ²³⁹Np have been precisely measured with gamma- and alpha-ray spectroscopic methods. The activities of the samples were determined by measuring alpha particles using a Si semiconductor detector. Gamma rays emitted from the samples were measured with a planar type High-Purity Germanium (HPGe) detector. An efficiency curve of the HPGe detector was derived with uncertainties from 0.7% to 2.5% by combining measured efficiencies and Monte Carlo simulation. The gamma-ray emission probabilities for the major gamma rays of these nuclides were determined with uncertainties less than 1.2%.     

Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Inter-comparison of various global sea surface temperature products

In this study, eight global sea surface temperature (SST) products for 2009 are compared to clarify their characteristics. The median of eight daily values, the Ensemble Median as Reference Product (EMRP), is used as a reference product for inter-comparison. The results show that the absolute value of mean differences and the value of root mean square (RMS) differences are higher in single-microwave products such as Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E), Tropical Rainfall Measuring Mission Microwave Imager (TMI), and WindSat, than in products such as MicroWave Optimally Interpolated SST (MWOI), Merged satellite and in situ data Global Daily SST (MGD), and Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) constructed by merging several SST data. It is of note that the characteristics of SST products depend on the type of SST used within the product, rather than the data source used. A comparison of SST products was also conducted using EMRP and data observed by moored buoys. The results show that only AMSR-E has a warm bias (+0.06°C) while other products have a cool bias (maximum value ?0.10°C). The RMS error of TMI is the highest (0.57°C), and that of EMRP the lowest (0.28°C). Furthermore, the temporal variability between the data in each SST product was compared to those observed by the Kuroshio Extension Observatory (KEO) buoy. Results show that the temporal variability of EMRP corresponds well to that of buoy data, and that the RMS error of EMRP is lower than that of the other SST products.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

Optical manipulation of multiple stable states in photorefractive four-wave mixing

Abstract

We propose an approach to manipulate the convergence in multiple solutions of phase conjugate reflectivity in photorefractive four-wave mixing. Although a method forcibly adding a π-phase shift to an incident beam has been already proposed to control the reflectivity, some restrictions have been required in the boundary conditions for the successful operation. Here, we control the reflectivity with the boundary conditions in which the phase shift operation is ineffective by itself. In our method, the phase shift operation is combined with the procedure of turning an incident beam on and off. With a numerical analysis of four-wave mixing, we show that our new approach brings drastic change in the spatial distribution of the index grating and leads the phase conjugate reflectivity which was not manipulated previously.     

Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.