Cure kinetics and mechanical properties of the blend system of epoxy/diaminodiphenyl sulfone and amine terminated polyetherimide-carboxyl terminated poly(butadiene-co-acrylonitrile) block copolymer

The cure kinetics of blends of epoxy resin (4,4’-tetraglycidyl diaminodiphenyl methane; TGDDM)/curing agent (diaminodiphenyl sulfone; DDS) with ATPEI (amine terminated poly-etherimide) -CTBN (carboxyl terminated poly (butadiene-co-acrylonitrile)) block copolymer (AB type) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction kinetic parameters such as activation energy and reaction constants. Final cure conversion decreased with increasing amount of AB in the blends. A diffusion controlled reaction was observed as the cure conversion increased, and the curing reaction was successfully analyzed by incorporating the diffusion control term in the rate equation for the epoxy/DDS/AB blends. The fracture toughness was improved to about 350% compared to that of the unmodified resin at 30% of AB block copolymer. This is attributed to the formation of co-continuous morphology between the epoxy phase and AB block copolymer phase. By increasing the amount of AB, the modulus of the cured blends decreased, which was due to the presence of CTBN rubbery phases.     

High temperature mechanical properities and creep crack initiation of DS CM186LC for nozzle guide vane

The second generation DS alloy, CM186LC is used in the as-cast and double aged condition which has creep-rupture properities equivalent to the first generation single crystal alloys CMSX-2 and CMSX-3. In production, cast vane components have to be subjected to a brazing treatment for joining into pairs. The effect of the brazing treatment and modified brazing treatment (heat treatment) on mechanical properities at high temperature was studied in accordance with microstructure. Brazing treatments gave no effect on tensile properities and creep failure mode of DS CM186LC, although a small decrease in stress-rupture life was observed. Creep failure was related to the solidified microstructure. Creep cracks began at the grain boundary normal to the applied stress, especially at the γ/γ’ eutectic phase on grain boundaries. Most of γ/γ’ eutectics which had solidified at the last stage of casting, had microporosity which became a crack initiation site during creep. MC carbide reaction with the matrix γ was observed in the creep failed specimens.     

Improving the colorfastness of poly(ethylene terephthalate) fabrics with the natural dye of Caesalpinia sappan L. Wood extract and the effect of chitosan and low-temperature plasma

The effect of a low-temperature plasma and/or chitosan pretreatment as a mordant on the dyeing of poly(ethylene terephthalate) fabrics with an aqueous extract of Caesalpinia sappan L. wood, which showed a remarkably high coloring property in a natural dyeing system, was investigated. After dyeing, scanning electron microscopy, add-on, color measurements, and fastness to washing tests were performed. Dyeing with the C. sappan L. extract led to fair-to-good fastness properties in conventional natural dyeing. The results clearly show that the pretreatment with chitosan and/or plasma is better than a metal mordant in terms of the dye uptake and reduction in the dyeing time, that the proposed pretreatment coloration reaction could be carried out without the need for repetitive dye steps, and that it prevents the excessive use of dye chemicals, thereby resulting in a more ecofriendly process. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of precipitation from tweed matrix on the mechanical properties in a metastable beta alloy of Ti-15-3

The effects of aging treatment on the microstructures and mechanical properties of a metastable beta titanium alloy Ti-15-3 (Ti−15V−3Al−3Sn-3Cr) have been investigated with hardness measurements, tensile test, and optical and electron microscopy. Precipitate-free beta structure with average grain size of about 56 μm was obtained after solution treatment at 800°C for 15 min followed by air cooling. Solution treated specimens were aged up to 800 h in the temperature range between 350 and 600°C. The morphology of the precipitates was varied significantly, depending on the aging temperature. The fine aggregates of α precipitates were dominant above 450°C. Peak hardness values were maintained up to 800 h at 500°C, which showed the superior thermal stability of α precipitates. Tensile strength increased up to 1600 MPa along with the decrease of elongation after aging at 350 and 400°C.     

AQP3 Increases Intercellular Cohesion in NSCLC A549 Cell Spheroids through Exploratory Cell Protrusions

Tumor cell aggregation is critical for cell survival following the loss of extracellular matrix attachment and dissemination. However, the underlying mechanotransduction of clustering solitary tumor cells is poorly understood, especially in non-small cell lung cancers (NSCLC). Here, we examined whether cell surface protrusions played an important role in facilitating the physical contact between floating cells detached from a substrate. We employed poly-2-hydroxyethyl methacrylate-based 3D culture methods to mimic in vivo tumor cell cluster formation. The suprastructural analysis of human NSCLC A549 cell spheroids showed that finger-like protrusions clung together via the actin cytoskeleton. Time-lapse holotomography demonstrated that the finger-like protrusions of free-floating cells in 3D culture displayed exploratory coalescence. Global gene expression analysis demonstrated that the genes in the organic hydroxyl transport were particularly enriched in the A549 cell spheroids. Particularly, the knockdown of the water channel aquaporin 3 gene (AQP3) impaired multicellular aggregate formation in 3D culture through the rearrangement of the actomyosin cytoskeleton. Moreover, the cells with reduced levels of AQP3 decreased their transmigration. Overall, these data indicate that cell detachment-upregulated AQP3 contributes to cell surface protrusions through actomyosin cytoskeleton remodeling, causing the aggressive aggregation of free-floating cells dependent on the property of the substratum and collective metastasis.     

Soluble Prokaryotic Overexpression and Purification of Human GM-CSF Using the Protein Disulfide Isomerase b′a′ Domain

Granulocyte-macrophage colony-stimulating factor (GM-CSF) is a member of the colony-stimulating factor (CSF) family, which functions to enhance the proliferation and differentiation of hematopoietic stem cells and other hematopoietic lineages such as neutrophils, dendritic cells, or macrophages. These proteins have thus generated considerable interest in clinical therapy research. A current obstacle to the prokaryotic production of human GM-CSF (hGM-CSF) is its low solubility when overexpressed and subsequent complex refolding processes. In our present study, the solubility of hGM-CSF was examined when combined with three N-terminal fusion tags in five E. coli strains at three different expression temperatures. In the five E. coli strains BL21 (DE3), ClearColi BL21 (DE3), LOBSTR, SHuffle T7 and Origami2 (DE3), the hexahistidine-tagged hGM-CSF showed the best expression but was insoluble in all cases at each examined temperature. Tagging with the maltose-binding protein (MBP) and the b′a′ domain of protein disulfide isomerase (PDIb′a′) greatly improved the soluble overexpression of hGM-CSF at 30 °C and 18 °C. The solubility was not improved using the Origami2 (DE3) and SHuffle T7 strains that have been engineered for disulfide bond formation. Two conventional chromatographic steps were used to purify hGM-CSF from the overexpressed PDIb′a′-hGM-CSF produced in ClearColi BL21 (DE3). In the experiment, 0.65 mg of hGM-CSF was isolated from a 0.5 L flask culture of these E. coli and showed a 98% purity by SDS-PAGE analysis and silver staining. The bioactivity of this purified hGM-CSF was measured at an EC₅₀ of 16.4 ± 2 pM by a CCK8 assay in TF-1 human erythroleukemia cells.     

Novel Bacterial Production of Two Different Bioactive Forms of Human Stem-Cell Factor

Human stem-cell factor (hSCF) stimulates the survival, proliferation, and differentiation of hematopoietic cells by binding to the c-Kit receptor. Various applications of hSCF require the efficient and reliable production of hSCF. hSCF exists in three forms: as two membrane-spanning proteins hSCF248 and hSCF229 and truncated soluble N-terminal protein hSCF164. hSCF164 is known to be insoluble when expressed in Escherichia coli cytoplasm, requiring a complex refolding procedure. The activity of hSCF248 has never been studied. Here, we investigated novel production methods for recombinant hSCF164 and hSCF248 without the refolding process. To increase the solubility of hSCF164, maltose-binding protein (MBP) and protein disulfide isomerase b’a’ domain (PDIb’a’) tags were attached to the N-terminus of hSCF164. These fusion proteins were overexpressed in soluble form in the Origami 2(DE3) E. coli strain. These solubilization effects were enhanced at a low temperature. His-hSCF248, the poly-His tagged form of hSCF248, was expressed in a highly soluble form without a solubilization tag protein, which was unexpected because His-hSCF248 contains a transmembrane domain. hSCF164 was purified using affinity and ion-exchange chromatography, and His-hSCF248 was purified by ion-exchange and gel filtration chromatography. The purified proteins stimulated the proliferation of TF-1 cells. Interestingly, the EC₅₀ value of His-hSCF248 was 1 pg/mL, 100-fold lower than 9 ng/mL hSCF164. Additionally, His-hSCF248 decreased the doubling time, increased the proportion of S and G2/M stages in the cell cycle, and increased the c-Myc expression at a 1000-fold lower concentration than hSCF164. In conclusion, His-hSCF248 was expressed in a soluble form in E. coli and had stronger activity than hSCF164. The molecular chaperone, MBP, enabled the soluble overexpression of hSCF164.     

Failure analysis of a boiler tube in USC coal power plant

This paper presents failure analysis of final superheater tube in ultra-supercritical (USC) coal power plant. Visual inspection was performed to find out the characteristics of fracture of the as-received material. And the micro-structural changes such as grain growth and carbide coarsening was examined by scanning electron microscope. Detailed microscopic studies were made to find out the behavior of the scale exfoliation on the waterside of tubes. From those investigations, the creep rupture may be caused by the softened structure induced by carbide coarsening and accelerated by the metal temperature increase by the impediment of heat transfer due to voids.     

Evaluation of jet performance in drop-on-demand (DOD) inkjet printing

Inkjet printing has been widely used in many applications and has been studied for many years. However, there are not many systematic researches on the mechanism of jet formation, nor is there any reliable platform that enables us to evaluate jet performance. In this study, an approach to practically evaluate the jet stability of the dropon-demand (DOD) inkjet printing has been proposed, based on which the transient behavior of the DOD drop formation has been studied experimentally for Newtonian liquids with a range of different viscosities (1.0–11 cp) but of a comparable surface tension. For more viscous liquids, the rate of the jet retraction after a pinch-off from the nozzle was found to increase as the thread motion became more sharp and conical as a result of the shape effect. The break-up time of the jet also increased because the rate of capillary wave propagation was lower for more viscous liquids. The jet stability graph, which can be drawn in terms of jet retraction and break-up time, was employed to characterize the jetting stability, and the degree of satellite drop generation was quantitatively evaluated by two critical jet speeds. The effect of an electric pulse imposed on a piezoelectric plate inside the printhead was also studied. The single-peak electric pulse was used in this experiment for simple analysis, and the jet speed variation was measured under different operating conditions. Both the optimal dwell time and the maximum stable jetting frequency were affected by viscosity and they were explained in terms of the propagation theory.