Exploiting the Plackett–Burman design to examine the formulation effect on curing characteristics of oil palm ash-filled acrylonitrile butadiene rubber compounds

The present paper is focused on exploiting Plackett–Burman design to examine the formulation effect of various chemical components content on the curing characteristics of oil palm ash (OPA)-filled acrylonitrile butadiene rubber (NBR) compound. The filled-NBR compound was prepared by conventional laboratory-sized two roll mill and cured using sulfuric system. Six independent variables such as content of zinc oxide, stearic acid, N-isopropyl-N′-phenyl-p-phenylenediamine, N-cyclohexyl-2-benzothiazole sulfenamide (CBS), sulfur, and even OPA filler were carried out to screen their significant effect on the curing characteristics of NBR compound. The scorch time, optimal cure time, minimum torque, and maximum torque were selected as a response. Results showed that the scorch time and the optimal cure time were significantly affected by CBS, whereas the minimum torque and maximum torque were significantly affected by OPA and sulfur, respectively, within the studied range. Among the chemical components under study, zinc oxide and stearic acid had the least effect on the curing properties of NBR compound. Analysis of variances for all factorial models demonstrated that the model was significant with P value <0.05 while the regularity (R ²) of all models was greater than 0.9. Lastly, the optimal chemical concentrations were predicted to acquire the optimal condition of the curing system for filled-NBR compound.     

Identification of Bioactivity,Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica

Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica.     

Bioaugmentation of floating treatment wetlands for the remediation of textile effluent

This pilot study evaluated the effects of bacterial augmentation on the efficiency of floating treatment wetlands (FTWs) to remediate textile wastewater. Two wetland plants, Phragmites australis and Typha domingensis, were used to develop FTWs, which were then augmented with a bacterial consortium of three strains (Acinetobacter junii, Pseudomonas indoloxydans, and Rhodococcus sp.). Results showed that both plant species removed colour, organic matter, toxicity, and heavy metals from textile wastewater and their removal efficiency was further enhanced by augmentation with bacteria. The maximum removal efficiencies of colour, COD and BOD after an 8‐day period were 97, 87 and 92%, respectively, by FTWs carrying P. australis inoculated with the bacterial consortium. Furthermore, the same combination showed 87–99% reduction of heavy metals in the textile wastewater as well. These results indicate that FTWs can be used for the treatment of textile effluent and their working efficiency can be improved by plant‐bacterial synergism.     

An improved strategy for skin lesion detection and classification using uniform segmentation and feature selection based approach

Melanoma is the deadliest type of skin cancer with highest mortality rate. However, the annihilation in early stage implies a high survival rate therefore, it demands early diagnosis. The accustomed diagnosis methods are costly and cumbersome due to the involvement of experienced experts as well as the requirements for highly equipped environment. The recent advancements in computerized solutions for these diagnoses are highly promising with improved accuracy and efficiency. In this article, we proposed a method for the classification of melanoma and benign skin lesions. Our approach integrates preprocessing, lesion segmentation, features extraction, features selection, and classification. Preprocessing is executed in the context of hair removal by DullRazor, whereas lesion texture and color information are utilized to enhance the lesion contrast. In lesion segmentation, a hybrid technique has been implemented and results are fused using additive law of probability. Serial based method is applied subsequently that extracts and fuses the traits such as color, texture, and HOG (shape). The fused features are selected afterwards by implementing a novel Boltzman Entropy method. Finally, the selected features are classified by Support Vector Machine. The proposed method is evaluated on publically available data set PH2. Our approach has provided promising results of sensitivity 97.7%, specificity 96.7%, accuracy 97.5%, and F‐score 97.5%, which are significantly better than the results of existing methods available on the same data set. The proposed method detects and classifies melanoma significantly good as compared to existing methods.     

Structural,viscoelastic, and vulcanization study of sponge ethylene–propylene–diene monomer composites with various carbon black loadings

In this article, we report the effect of various carbon nanoparticle concentrations on the structural, curing, tan δ, viscosity variation during vulcanization, thermal, and mechanical characteristics of ethylene–propylene–diene monomer polymer sponge composites. The purpose of this study was to develop high‐strength, foamy‐structure polymer composites with an optimum filler to matrix ratio for advanced engineering applications. We observed that the structural, vulcanization, viscoelastic, and mechanical properties of the fabricated composites were efficiently influenced with the progressive addition of carbon content in the rubber matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39423.     

Cure characterization of Cycom 977‐2A carbon/epoxy composites for quickstep processing

In this effort, Quickstep, a relatively a new technique, have been employed for manufacturing of composite materials. The cure schedule provided by a prepreg manufacturer is usually designed for autoclave or other traditional processing techniques and thermosetting resin systems are formulated for ramp rate curing 2–3 K min^?1. While in case of Quickstep processing, ramp rates of 15 K min^?1 can be achieved, thus changing the chemorheology of resin. The cure process of 977‐2A carbon/epoxy composites was evaluated for Quickstep processing using differential scanning calorimetry (DSC), dynamic mechanical and thermal analysis, and Fourier transformed infrared and results were compared with cure cycle employed for autoclave curing. Optimum hold time for Quickstep processing at upper curing temperature (180°C) was determined using DSC. The hold time of 120 min at 180°C was found to be suitable for Quickstep cure cycle, producing a panel of similar degree of cure to that achieved through autoclave processing schedule. Final degree of cure was dependent on time spent at upper cure temperature and slightly on initial steps of the cure cycle which was used to control the resin flow, fiber wetting, and void removal. Quickstep processed samples exhibited higher T_g and crosslink density and similar molecular network structure to the autoclave cured samples. POLYM. ENG. SCI., 54:887–898, 2014. © 2013 Society of Plastics Engineers     

Structural and magnetic properties of Pr–Ni substituted Ca0.5Ba0.5Fe12O19 hexa-ferrite nanoparticles

Effect of Pr–Ni substitution on structural and magnetic properties of Ca_0.5Ba_0.5−xPr_xNi_yFe_12−yO₁₉ (x=0.00–0.10 and y=0.00–1.00) prepared by the sol–gel auto combustion method were investigated. The XRD analysis confirmed the single phase M-type hexa-ferrite structure. The lattice parameters were found to increase as Pr–Ni content increases, which is attributed to the ionic size of the implicated cations. The Pr–Ni seems to be completely soluble in the lattice. Transmission electron microscopy reveals that the grain size decreases with increase of Pr–Ni substitution. The coercivity and remanent magnetization ranges from 1511 to 1925 (Oe) and 21.4 to 26.5 (emu/g), respectively. The coercivity values of all the samples fall in the range of M-type hexa-ferrites.     

Inhibition of Bruton Tyrosine Kinase Reduces Neuroimmune Cascade and Promotes Recovery after Spinal Cord Injury

Microglia/astrocyte and B cell neuroimmune responses are major contributors to the neurological deficits after traumatic spinal cord injury (SCI). Bruton tyrosine kinase (BTK) activation mechanistically links these neuroimmune mechanisms. Our objective is to use Ibrutinib, an FDA-approved BTK inhibitor, to inhibit the neuroimmune cascade thereby improving locomotor recovery after SCI. Rat models of contusive SCI, Western blot, immunofluorescence staining imaging, flow cytometry analysis, histological staining, and behavioral assessment were used to evaluate BTK activity, neuroimmune cascades, and functional outcomes. Both BTK expression and phosphorylation were increased at the lesion site at 2, 7, 14, and 28 days after SCI. Ibrutinib treatment (6 mg/kg/day, IP, starting 3 h post-injury for 7 or 14 days) reduced BTK activation and total BTK levels, attenuated the injury-induced elevations in Iba1, GFAP, CD138, and IgG at 7 or 14 days post-injury without reduction in CD45RA B cells, improved locomotor function (BBB scores), and resulted in a significant reduction in lesion volume and significant improvement in tissue-sparing 11 weeks post-injury. These results indicate that Ibrutinib exhibits neuroprotective effects by blocking excessive neuroimmune responses through BTK-mediated microglia/astroglial activation and B cell/antibody response in rat models of SCI. These data identify BTK as a potential therapeutic target for SCI.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.