Computer Simulation of IT-diagrams of Steel

PHASE transformation modeling is one of the mainchallenges in modeling of heat treatment[1].The mechanism of phase transformations is not fullyunderstood and interactive influence of differentelements,austenitizing temperature,etc.usually arenot taken in account.The mistakes in phase transformation calculationcould be extremely great if a model is based only ongrain size of prior austenite,austenitizing temperatureand elemental composition of steel.Phase transformation kinetic depends also o…     

Influence of Heat Treatment on the Bond Coat Cyclic Oxidation Behaviour in an Air-plasma-sprayed Thermal Barrier Coating System

THE METALLIC BOND COAT is an importantconstituent in a TBC system.It enhances the adhesionof the ceramic thermal barrier layer(the topcoat)to thesubstrate and also provides oxidation protection to thesubstrate metal.The composition of the bond coat,generalized as M-Cr-Al-Y,where M represents Ni,Coand/or Fe,generally allows a layer of alumina(A12O3)to form during high temperature exposure.If acontinuous scale of A12O3forms along the interfacebetween the bond coat and the ceramic to…     

Ni/Al Intermetallics Plasma Transferred Arc Processing

TAILORING COMPONENT SUFACES for elevatedtemperature operations has been a goal of researchersduring the last century.Process and material selectionare the key factors for this development.In particularlythe latter can be described to have started with thedevelopment of stainless steels.Ni and Co based alloys,the superalloys,attended the increasing technologicaldemands for higher service temperatures(1).Morerecently the higher operating temperatures ofequipments,such as gas turbines,r…     

Microstructure Transformation in the Welding Heat Affected Zone of 800MPa Grade Ultra Fine Structured Steel

The transformation behavior and microstructure development in the heat affected zone (HAZ) of 800MPa grade ultra fine structured steel was investigated. It was found that the HAZ has intermediate temperature transformation characteristics in a wide range of cooling rates, with the bainite sheaves consisting of bainite ferrite plates without carbide precipitation and retained austenite in the .fast cooling regime. At relatively high cooling rates, which corresponded to low heat inputs, the hardness o.f the simulated HAZ was above that of the base metal. When the cooling rate was below 9℃/s, the welding HAZ would have an obvious softening. The analysis of transformation rates in continuous cooling processes was completed by numerical differential method. The result indicated that the microstructure transformation rate o.f the HAZ in 800MPa grade ultra fine structured steel changed sharply to slow speeds when the cooling time t8/5 is longer than 7s.     

Effects of Thermal Cycle on Mechanical Properties and Fractography in HAZ of HQ130 Steel

The effect of different peak temperature (Tp) and cooling time (t8/5) on hardness, impact toughness and fracture morphology in the heat-affected zone (HAZ) of HQ130 steel was studied by using welding thermo-simulation test. Experimental results show that the impact toughness and hardness decrease with the decrease of Tp or increase of t8/5 under the condition of a single thermal cycle. There is a brittle zone in the vicinity of Tp=800℃, where the impact toughness is considerably low. There is softened zone in vicinity of Tp=700℃, Where the hardness decreases but the toughness increases. In the practical application of multi-layer and multi-pass welding, the welding heat input should be strictly limited (t8/5≥20s) so as to reduce the softness and brittleness in the HAZ of HQ130 steel.     

Numerical Simulation of Macro-Segregation in Steel Ingot During Solidification

A mathematical model coupling the momentum, energy and species conservation equations was proposed to calculate the macro-segregation of Fe-C alloy ingot during solidification. The corresponding simulation software which concurrently solves the macroscopic mass, momentum, energy and species conservation equations has been developed by applying the SIMPLE algorithm. The thermo-solutal convection in a NH4 Cl-H2O ingot is verified and the result shows good agreement with that reported. Then macro-segregation in a steel ingot is simulated by using the developed program. The steel ingot is in a rectangular mold with a riser. The fluid flow is mainly induced by the temperature field and the solid fraction. The macro-segregation pattern is mainly affected by the thermo-induced convection in the mushy zone. The negative segregation forms along the walls of the casting. The positive segregation forms at the top center of the casting into the riser. The species concentration reaches the peak in the center of the ingot where solidification ends lastly.     

Numerical Simulation of Controlling in Titanium Alloy Sheets Welding Residual Stress by Trailing Peening

It is a promising and new technology to apply welding with trailing peening to control welding stress and distortion of titanium alloy. Numerical simulation of conventional welding and welding with trailing peening of the titanium alloy sheet is carried out, using nonlinear finite element theory and the engineering analysis software MARC. The result shows that welding with trailing peening technology reduces longitudinal residual stress in welding joint effectively, and it is more effective to reduce residual stress to peen the weld than to peen the weld toe. It is a effective result that other technolooy and method used in welding can never achieved.     

Si-Al COATING ON PURE MOLYBDENUM SUBSTRATE AND ITS CYCLIC OXIDATION BEHAVIOR

The halide-activated pack cementation method is utilized to codeposit aluminum and silicon on Mo substrate. Emphasis is placed on the microstructure and elevated-temperature oxidation resistance of coatings. The results show that hexagonal Mo (Si, Al)2 as a main phase and a little amount of the lower disilicide Mo3Si3 was formed on Mo substrate through the halide-activated pack cementation method. The resultant Si-Al coating on Mo substrate exhibits excellent cyclic oxidation resistance. The excellent cyclic oxidation resistance of the coatings is attributed to the formation of alumina on the coatings during the oxidation.     

CALCULATION OF TRANSFORMATION VOLUME FRACTION TO HQ590 HOT ROLLED STRIP STEEL DURING CONTINUOUS COOLING

On the basis of phase transformation kinetics, the transformation of γ→α,P,B have been investigated through considering the effect of deformation. The calculation methods of volume fraction have also been given. Comparing with common method, the simulated results are in more agreement with experiment results.     

THE PHYSICAL SIMULATION ON EXTRUSION PROCESS OF GLASS FIBER COMPOSITE WIRE COATED BY LEAD

The method of manufacturing the composite wire by extruding lead to coated glass fiber is described. The different composite wire that diameter is from 0.5 to 1.0mm has been produced by two kinds of different extruding technology (getting wire along horizontal direction and getting wire along perpendicular direction). The optimal extruding technological parameter has been given in different extruding technology by the physical simulation (H: 300℃, 550kN, 0.16mm. P: 300℃, 215kN, 0.16mm). The effect on the coating speed by other extruding technological parameters in the different extruding technology has been discussed. The extruding temperature and extruding force is higher, the coating speed is faster. It has been pointed, that the affection on the extruding technology by the extruding temperature has also behaved as the extruding temperature rising up spontaneously. The reason for exiting the minimum extruding force and maximum extruding force also has been discussion in this paper. It is also important to the extruding process and coating speed that is the coating clearance.