Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions     

Digital-to-analog conversion by pulse-count modulation methods

Three low-cost digital-to-analog converters (DACs) are described and compared. These designs can easily be implemented in an integrated circuit: the conventional pulse-width modulation (PWM) DAC, the new pulse-count modulation (PCM) DAC and the first-order noise shaping (FONS) DAC. All three methods control the ratio of the sum of all pulse durations to the constant total period. As the pulse durations are integral multiples of a unit pulse, all three can be classified as pulse-count modulation methods. Block diagrams of all three DACs consisting of a simple digital circuit and a low-pass filter are presented. For a constant digital input value the worst case ripple of the filter output is used to calculate the cutoff frequency of the low-pass filter. Approximations for the 3 dB cutoff frequency of first-order, second-order and fourth-order Butterworth low-pass filters are given. The dynamic properties are analyzed in the time domain (settling time) and in the frequency domain (unfiltered output spectrum of a full-scale sine wave input). The main influences on the static accuracy are analyzed. A case study demonstrates the abilities of PCM and FONS     

Magnetometric determination of the angular position of an object

A method is described for finding the angular position of an object by measuring at two selected points in space the components of an alternating magnetic field set up by two sources. The angular position of the object and its coordinates can be measured even if the object is moved or rotated about any axis through 0 to 360° in the presence of magnetic interference. Translated from Izmeritel'naya Tekhnika, No. 12, pp. 34–37, December, 1996.     

A preliminary investigation into the microscopic depassivation of passive titanium implant materials in vitro

A sensitive electrochemical technique has been used to examine the passive state of titanium-based materials in Ringer's physiological solution. At ambient temperature, the alloy Ti-6Al-4V shows transient microscopic breakdown of the passive state induced by the presence of chloride ions, and enhanced by increased acidity. These breakdown events involve highly localized depassivation of the passive surface followed by repassivation. Under similar experimental conditions no breakdown of passive titanium was detected.     

Sterilization of heparinized Cuprophan hemodialysis membranes

The effects of sterilization of dry heparinized Cuprophan hemodialysis membranes by means of ethylene oxide (EtO) exposure, gamma irradiation, or steam on the anticoagulant activity and chemical characteristics of immobilized heparin and the permeability of the membrane were investigated. Sterilization did not result in a release of heparin or heparin fragments from heparinized Cuprophan. Sterilization of heparinized Cuprophan by means of EtO exposure and gamma irradiation induced a slight, insignificant decrease of the anticoagulant activity. In contrast, steam-sterilized heparinized Cuprophan showed a higher anticoagulant activity than unsterilized heparinized Cuprophan, which was most likely caused by cleavage of some of the covalent bonds between heparin and Cupropha. The effects of sterilization on the permeability of unmodified Cuprophan and heparinized Cuprophan were compared. The permeability of unmodified Cuprophan for vitamin B₁₂ (Vit B₁₂) and sulfobromophthalein (SBP) was reduced by 20–35% after EtO exposure and gamma irradiation and was reduced by 90–95% after steam sterilization. The water permeability of unmodified Cuprophan remained the same after EtO exposure and gamma irradiation but also dramatically reduced after steam sterilization. These reductions were ascribed to the collapse of pores of the membrane. The permeability of heparinized Cuprophan was not affected by EtO exposure and gamma irradiation but dramatically reduced after steam sterilization, although to a lesser extent than in the case of unmodified Cuprophan. Apparently, the presence of immobilized heparin (partially) prevented the collapse of pores during sterilization. Gamma irradiation was recommended as the preferred method of sterilization for heparinized Cuprophan.     

Reconstitution of CD3 zeta coupling to calcium mobilization via genetic complementation

The integrity of the T cell receptor complex (CD3-TCR) transduction machinery is central to T cell development and to T cell effector function. Molecular dissection of the multimeric CD3-TCR complex revealed that at least two associated polypeptides, CD3 zeta and CD3 epsilon, autonomously couple antigenic recognition event to early and late events of the intracytoplasmic activation cascade. A 18-amino acid motif based on a tandem YXXL stretch, the activation receptor homology sequence 1 (ARH-1) motif, is necessary and sufficient to the transducing properties of both CD3 zeta and CD3 epsilon. Stimulation of chimeric molecules made of ecto- and transmembrane domains of various cell surface proteins and intracytoplasmic domains of CD3 epsilon or CD3 zeta leads to an increase in the intracellular Ca2+ concentration ([Ca2+]i) in Jurkat cells. We describe here that a similar CD25/zeta chimeric molecule was unable to induce a detectable [Ca2+]i rise upon CD25 cross-linking once expressed in the murine thymoma BW-. A Ca2+ influx could, however, be triggered in BW- cells by thapsigargin, i.e. following depletion of Ca2+ stores. Somatic cell hybrids made from BW- and either thymocytes or mature lymph node T cells reconstituted the coupling of CD3 zeta to the Ca2+ signal via an ARH-1 motif-dependent pathway. However, pervanadate-induced Ca2+ mobilization, a phenomenon attributed to tyrosine phosphorylation, was impaired in BW-cells and reconstituted in hybridomas. In contrast to the Ca2+ response, IL-2 production was induced in both BW- and hybrids cells, which questions the functional relevance of [Ca2+]i augmentation in T cell activation. In conclusion, the properties of the BW- thymoma, which define a novel group of CD3 zeta transduction cell mutants, as well as its complementation by somatic cell fusion demonstrate that this cell line represents a useful model to dissect the signaling pathway that couples CD3 zeta to Ca2+ mobilization by genetic reconstitution.     

INSTRUMENTATION FOR FLOW PROPERTIES OF GAS-SOLID SUSPENSIONS AND RECENT ADVANCES

Measurements of local velocity, density, and mass flow of phases of a gas-solid suspension are needed in determining transport properties, validating theoretical predictions, and formulating design procedures. Most of the available instruments are based on time averages or fluctuations with time. Primary standard for direct measurement of density of a phase such as solid particles is being developed. A laser phase Doppler device, within certain restrictions, may give local instantaneous density, while other optical methods and neutron beam remain secondary standards based on mass flow calibrations. An overall review including recent results has been made on both intrusive and non-intrusive instruments; their limitations and future possibilities are outlined and discussed. The limitations of the traditional approach utilizing the triangular relation between local averages of mass flow, velocity, and density of particles for the determination of flow properties, and higher order correlations are demonstrated.