New compact wideband bandpass filter using three parallel-coupledlines

A new miniature bandpass filter, comprising three-conductor short-circuited spurline resonators of approximately a quarter-wavelength long, with a very wide bandwidth approaching multioctaves is reported for the first time. The chain matrix of the filter resonator is derived. The new filter has been developed using microstrip line with less than 1 dB insertion loss over a passband from 2 to 8 GHz. Reasonably good agreement between the measured and calculated results is observed     

Post-deposition treatment effects on hydroxyapatite vacuum plasma spray coatings

The purpose of this work is to evaluate the effects of post-deposition heat treatments on high and low crystallinity hydroxyapatite coatings on Ti6Al4V alloy. HA layers were produced by the vacuum plasma spray (VPS) technique, and the desired degrees of crystallinity were obtained by changing the deposition parameters. An analysis of the mechanical properties of the coatings and their adhesion to the substrate has been done by shear strength test. X-ray diffraction analysis was used to detect the structure and the chemical components in which HA dissociates during the deposition process and heat treatments. The data obtained indicates that heat treatments can increase the crystallinity of HA, but they also introduce a mechanical degradation of the coatings. After heat treatments, it was also observed that a large amount of tetracalcium phosphate was formed.     

Crack growth measurements on components under cyclic loading: comparison of different methods

The cyclic crack growth behaviour was measured by means of d.c. potential drop, a.c. potential drop, ultrasonic and crack-opening displacement (COD) methods. The methods were applied to component tests on straight pipes with an outer diameter of approximately 800 mm and a wall thickness of approximately 50 mm. The pipes were subjected to constant internal pressure (about 15 MPa) and either an alternating (or pulsating) or a quasi-static bending moment using d.c. potential drop, a.c. potential drop, ultrasonic and flaw-opening (COD) methods. The efficiency of the particular methods has been proved by comparison with fractographical analysis of the fracture surfaces.     

Characterization of the flow behaviour of sausage emulsions with a simple tube viscometer

A specially designed tube viscometer was used to measure apparent viscosity during flow of Bologna type sausage emulsions moving through a pipe. Emulsions varied in fat content (from 21.8 to 44.3%) and in moisture/protein ratio (from 3.7 to 5.6), and the effects of added sodium chloride, sodium diphosphate, starch and blood plasma were investigated in a 36% fat, 3.7 moisture/protein emulsion.
The shear stresses determined as a function of shear rate were fitted by a power law. Yield stress of the emulsions was negligible relative to the applied stress. However, inspection of the flow profiles indicated that considerable slip of the sausage emulsion occurred at the pipe wall. Both emulsion flow and slip contribute to overall flow behaviour, so a kind of effective viscosity is determined. Intrinsic rheological properties and wall slip will both be affected by the composition of the sausage emulsion.     

A forward-looking system for planning and monitoring metrological support to an organization

The ARM-Uchet computerized system is considered, which is intended for accounting, planning, and monitoring for metrological support to an organization and has been implemented on an IBM PC AT. Schemes are given for the basic modes of operation and for the software suites, as well as the database structure.Translated from Izmeritel'naya Tekhnika, No. 7, pp. 70–71, July, 1994.     

~（60）Co辐照对聚四氟乙烯表面润湿性的影响

研究了具有低表面能的氟聚合物聚四氟乙烯（ＰＴＦＥ），经６０Ｃｏγ射线辐照后表面状态的变化，以及其对液体介质蒸馏水的润湿性。较详细地论述了辐照后表面粗糙度、结晶度以及表面化学基因等不同因素对ＰＴＦＥ表面润湿性的影响。通过对ＰＴＦＥ及其表面的红外、Ｘ光衍射，表面粗糙度的分析，弄清了辐照后ＰＴＦＥ表面化学基团的改变对有机氟聚合物表加的润湿性影响很大，而粗糙度和结晶度的变化对润湿性影响较小。     

The particle pressure of arrays in a potential flow

The role of the polarization of objects, for determining the forces acting on them in a surrounding potential flow, is developed. This is used to derive the particle pressure and compressibility for arrays, as well as expressions for the overall average stresses. The structure of the array, and the way in which it responds to a virtual strain, determines these stresses in contrast to earlier structure-independent models of Geurst (Physica 129A (1985) 233–261, Physica, 135A (1986) 455–486) and Wallis (Multiphase Sci. Technol. 5 (1989) 239–361, Int. J. Multiphase Flow 17 (6) (1991) 815–821). Specific results are given for rectangular arrays of spheres.     

Relationships between nocturnal activity, parental ratings of daytime activity and measues from the Children's Sleep Behaviour Scale.

Monitored the nocturnal activity levels of 20 boys and 20 girls (mean age 10.46 yrs) from 12:00 AM to 6:00 AM over 2 consecutive nights in their homes. Frequency of sleep-related behaviors based on retrospective parental ratings was assessed by the Children's Sleep Behavior Scale (CSBS). Children who were rated high on sleep behaviors with an observable motor component were also more active during the night, thereby validating the motor subscale of the CSBS. Nocturnal activity was associated with another CSBS-derived sleep score that included items with positive affective content, such as laughing and smiling while asleep. Children who showed bedtime resistance behaviors and complained of difficulty going to sleep were not more active during the night. Gender, age, and parental perception of daytime activity levels were not related to objective measures of nocturnal activity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)