Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

Comment on "Outage Probability Analysis of a MIMO Relay Channel with Orthogonal Space-Time Block Codes"

We point out that a simpler expression could be derived for the outage probability considered by Chalise and Vandendorpe (2008). As a result, the computation of confluent hypergeometric function of two variables is not needed and the required computational effort is significantly reduced.     

Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.     

Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour

Polyoxymethylene (POM) composites filled with low-density polyethylene (LDPE) and rice husk flour (RHF) were prepared by injection molding. The POM/5 wt % LDPE/7.5 wt % RHF composite exhibited the lowest wear rate, whereas the coefficient of friction remained low, and the POM/5 wt % LDPE/5 wt % RHF composite had the best mechanical properties. X-ray diffraction analysis was carried out, and the worn surfaces were examined with scanning electron microscopy. The results showed that the addition of the filler reduced the crystallinity degree of the POM composites. The main wear mechanism for unfilled POM was adhesion, whereas for the POM composites, wear seemed to occur mainly by fatigue and abrasion. It was experimentally confirmed that the POM composite filled with LDPE and RHF, which is well-performing, low-cost, and environmentally friendly, could be a potential material for tribological applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Modelling asymmetry in the peripheral auditory system of the lizard

The ears of lizards are highly directional. The directionality is generated by strong acoustical coupling of the eardrums. A simple lumped-parameter model of the ear followed by binaural comparisons has been shown to perform successful phonotaxis in robot implementations. However, such a model will produce localization errors in the form of response bias if the ears are asymmetrical. We have evaluated how large errors are generated by asymmetry using simulations of the ear model in Mathematica 5.2. The study shows that the effect of asymmetry is minimal around the most directional frequency of the ear, but that biases reduce the useful bandwidth of localization. This work was presented in part at the First European Workshop on Artificial Life and Robotics, Vienna, Austria, July 12–13, 2007     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

管道安装工程中管路及附件匹配性问题研究

在管道设备安装工程中，常出现到货管材与管路附件不匹配的问题，究其原因，主要是目前国内使用的管材与管路附件标准繁杂、兼容性不高所致。为此，文章从管材及管件、阀门、管路法兰三方面分析了现行国内外标准之间、国标与行标之间存在的差异，并提出防止管材与管路附件不匹配的措施。