Power allocation policies with full and partial inter-system channel state information for cognitive radio networks

This paper investigates several power allocation policies in orthogonal frequency division multiplexing -based cognitive radio networks under the different availability of inter-system channel state information (CSI) and the different capability of licensed primary users (PUs). Specifically, we deal with two types of PUs having different capabilities: a dumb (peak interference-power tolerable) PU and a more sophisticated (average interference-power tolerable) PU. For such PU models, we first formulate two optimization problems that maximize the capacity of unlicensed secondary user (SU) while maintaining the quality of service of PU under the assumption that both intra- and inter-system CSI are fully available. However, due to loose cooperation between SU and PU, it may be difficult or even infeasible for SU to obtain the full inter-system CSI. Thus, under the partial inter-system CSI setting, we also formulate another two optimization problems by introducing interference-power outage constraints. We propose optimal and efficient suboptimal power allocation policies for these four problems. Extensive numerical results demonstrate that the spectral efficiency achieved by SU with partial inter-system CSI is less than half of what is achieved with full inter-system CSI within a reasonable range of outage probability (e.g., less than 10 %). Further, it is shown that the average interference-power tolerable PU can help to increase the saturated spectral efficiency of SU by about 20 and 50 % in both cases of full and partial inter-system CSI, respectively.     

Improved photovoltaic performance by enhanced crystallinity of poly(3-hexyl)thiophene

The packing effects induced by the hydrophilic ethylene glycol oligomer side chains occurred in a P3HT:PC₆₁BM mixture upon the addition of small amounts of BP93 (containing 7 mol% PEGT blocks), leading to an enhanced crystallinity among the P3HT molecules, even in a P3HT:PC₆₁BM blend. The enhanced crystallinity improved the charge transport and current density (8.3–11.1 mA/cm²) and increased the power conversion efficiency (3.1–3.9%) in an organic solar cell.     

Characterization of Fluxing and Hybrid Underfills with Micro‐encapsulated Catalyst for Long Pot Life

For the fine‐pitch application of flip‐chip bonding with semiconductor packaging, fluxing and hybrid underfills were developed. A micro‐encapsulated catalyst was adopted to control the chemical reaction at room and processing temperatures. From the experiments with a differential scanning calorimetry and viscometer, the chemical reaction and viscosity changes were quantitatively characterized, and the optimum type and amount of micro‐encapsulated catalyst were determined to obtain the best pot life from a commercial viewpoint. It is expected that fluxing and hybrid underfills will be applied to fine‐pitch flip‐chip bonding processes and be highly reliable.     

An Effective Traceback Network Attack Procedure for Source Address Verification

Wireless Personal Communications - The Internet is being extensively used in various fields to serve billions of users, which leads to the number of network security issues. Here, Internet Protocol...     

Simultaneous Optimization of Luminance and Color Chromaticity of Phosphors Using a Nondominated Sorting Genetic Algorithm

Acquiring materials that simultaneously meet two or more conflicting requirements is very difficult. For instance, a situation wherein the color chromaticity and photoluminescence (PL) intensity of phosphors conflict with one another is a frequent problem. Therefore, identification of a good phosphor that simultaneously exhibits both desirable PL intensity and color chromaticity is a challenge. A high‐throughput synthesis and characterization strategy that was reinforced by a nondominated sorting genetic algorithm (NSGA)‐based optimization process was employed to simultaneously optimize both the PL intensity and color chromaticity of a MgO–ZnO–SrO–CaO–BaO–Al₂O₃–Ga₂O₃–MnO system. NSGA operations, such as Pareto sorting and niche sharing, and the ensuing high‐throughput synthesis and characterization resulted in identification of promising green phosphors, i.e., Mn²⁺‐doped AB₂O₄ (A = alkali earth, B = Al and Ga) spinel solid solutions, for use in either plasma display panels or cold cathode fluorescent lamps.     

Flexible Transparent Reduced Graphene Oxide Sensor Coupled with Organic Dye Molecules for Rapid Dual‐Mode Ammonia Gas Detection

Flexible chemical sensors utilizing chemically sensitive nanomaterials are of great interest for wearable sensing applications. However, obtaining high performance flexible chemical sensors with high sensitivity, fast response, transparency, stability, and workability at ambient conditions is still challenging. Herein, a newly designed flexible and transparent chemical sensor of reduced graphene oxide (R‐GO) coupled with organic dye molecules (bromophenol blue) is introduced. This device has promising properties such as high mechanical flexibility (>5000 bending cycles with a bending radius of 0.95 cm) and optical transparency (>60% in the visible region). Furthermore, stacking the water‐trapping dye layer on R‐GO enables a higher response as well as workability in a large relative humidity range (up to 80%), and dual‐mode detection capabilities of colorimetric and electrical sensing for NH₃ gas (5–40 ppm). These advantageous attributes of the flexible and transparent R‐GO sensor coupled with organic dye molecules provide great potential for real‐time monitoring of toxic gas/vapor in future practical chemical sensing at room conditions in wearable electronics.     

Fabrication and characterization of ZrO2–CaO–P2O5–Na2O–SiO2 bioactive glass ceramics

SiO₂–CaO–Na₂O–P₂O₅–ZrO₂ based bioactive glasses with different compositions of SiO₂ and yttrium stabilized ZrO₂ were prepared by the conventional melt quenching technique. The effects on the chemical–mechanical properties of bioactive glasses due to the addition of ZrO₂ by replacing SiO₂ were investigated. Microstructure and phase behavior were studied by scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction analysis. Compressive strength, porosity, Vickers hardness, and Young’s modulus were measured as mechanical properties. Bioactivity and cell viability were investigated by immersion in simulated body fluid and MTT assay analysis. Osteosarcoma cell proliferation on the specimen surfaces was examined by confocal laser scanning microscopy. The results showed that replacing SiO₂ with ZrO₂ helps the bioactive glass to be completely vitrified at comparatively lower sintering temperature than conventional Bioglass^®. The mechanical properties were also improved without compromising biocompatibility. Bioactive glass containing 10 wt% ZrO₂ and 35 wt% SiO₂ showed compressive strength of 399.71 MPa, Young's modulus of 22.3 GPa, Vicker’s hardness of 502.54 HV, and porosity of 26 vol%.     

Synthesis and electrochemical characterization of Li2MnO3–LiNixCOyMnzO2 cathode for lithium battery using co-precipitation method

The Li_xNi_0.23Co_0.12Mn_0.65O₂ electrode system with various compositions (x = 1.19, 1.33, 1.46, 1.58) was synthesized from a metal oxide precursor synthesized by co-precipitation method. The XRD patterns of the prepared powders revealed a hexagonal α-NaFeO₂ structure (space group: R-3m, 166) and the existence of a Li₂MnO₃ phase in the composite structure. In particular, the low Li content sample shows a three integrated structure (spinel, Li₂MnO₃, LiMO₂) for a Li/Metal(Ni/Co/Mn) mol ratio of 1.2. Scanning electron microscopy showed that all the synthesized samples contained spherical agglomerates with a size of 8–10 μm. Among the samples tested, Li_1.46Ni_0.23Co_0.12Mn_0.65O₂ shows relatively high charge and discharge capacity for the first cycle is 287, 192.9 mA h g^?1, respectively. Also, charge transfer resistance was also significantly improved compare with other samples.     

Reflective color display using thermochromic pigments

A reflective thermochromic display fabricated by a very simple method using three kinds of thermochromic pigments is produced and its thermo-optical characteristics are investigated. The display exhibits maximum red, green, and blue reflectances of 38%, 30%, and 35%, respectively. The reflective display cell shows continuous gray color with changing temperature, which is crucial for multicolor displays. It also shows an excellent viewing angle above 80° without any of the additional optical components that are required in liquid crystal displays. We expect that this display technology will be used for outdoor billboard information display applications.