Low complexity iterative decoding for bit-interleaved coded modulation

Bit-interleaved coded modulation with iterative decoding (ID) is an effective scheme for both AWGN and fading channels because it simultaneously realizes large Euclidean distance and high diversity. In the literature, ID schemes with hard-decision feedback (HDF), as well as soft-decision feedback (SDF), have been investigated. While HDF/ID exhibits a performance inferior to SDF/ID, it is much simpler to implement. To enhance the performance of HDF/ID with moderate additional complexity, we propose a uniform soft-decision feedback ID (USF/ID) scheme. The proposed scheme is applicable in both single antenna and multiple antenna communication systems. The simulation results verify that it achieves impressive performance gain over HDF/ID and has a practically more attractive implementation than SDF/ID, especially for complexity-constrained wireless applications.     

Cover Picture: Protein Detecting Arrays Based on Cationic Polythiophene–DNA‐Aptamer Complexes (Adv. Mater. 20/2006)

The cover image depicts biochips based on responsive nanoaggregates made from stoichiometric complexes between a cationic polythiophene and an appropriate DNA aptamer. These structures undergo a conformational transition from an unfolded to a folded (G‐quadruplex) structure in the presence of a specific target protein that results in a significant increase of the fluorescence intensity, as reported on p. 2703 by Leclerc and co‐workers.     

Comments on “Quadratic stabilization of continuous timesystems with state-delay and norm-bounded time-varyinguncertainties”

In the above mentioned paper by Mahmoud-Muthairi (ibid. vol.39 (1994)) a sufficient condition for memoryless stabilization of a class of uncertain linear systems with a variable-state delay and norm-bounded time-varying uncertainties is derived in terms of an algebraic Riccati equation. This Riccati equation depends on several free matrix variables, and a subsequent result in the paper, Theorem 2, states that failure or success of the stabilization algorithm is independent of the selection of these matrix variables. In this paper, we give a counterexample to this Theorem 2 as well as providing a fix     

A note on the robust stability of uncertain stochastic fuzzy systems with time-delays

Takagi-Sugeno (T-S) fuzzy models are now often used to describe complex nonlinear systems in terms of fuzzy sets and fuzzy reasoning applied to a set of linear submodels. In this note, the T-S fuzzy model approach is exploited to establish stability criteria for a class of nonlinear stochastic systems with time delay. Sufficient conditions are derived in the format of linear matrix inequalities (LMIs), such that for all admissible parameter uncertainties, the overall fuzzy system is stochastically exponentially stable in the mean square, independent of the time delay. Therefore, with the numerically attractive Matlab LMI toolbox, the robust stability of the uncertain stochastic fuzzy systems with time delays can be easily checked.     

Influence of calcination temperature on structural and optical properties of TiO2-SiO2 thin films prepared by sol-gel dip coating

We prepared TiO₂-SiO₂ thin films with various TiO₂/SiO₂ ratios by sol-gel dip coating method and explored the dependence of their structural and optical properties on calcination temperature. The absorption peaks relevant to Si—O, Si—O—Ti and Ti—O bonds appeared in the FTIR spectra. With increasing TiO₂ content, the intensity of Si—O bond peaks decreases and that of Ti—O bond peaks increases. The XRD results show that the temperature of transformation from amorphous to anatase phase is lowered as TiO₂ content increases. The crystallite size of anatase phase in composite thin films increases with increasing TiO₂ content and calcination temperature. At 1000°C, the mixed phase of anatase and rutile appears in the pure TiO₂ thin films. The rutile films are denser than the anatase films. The increase in refractive index of composite thin films with calcination temperature is related to the decreased thickness and increased density as a result of evaporation of water and organic matters below 400°C. On the other hand, it is related to the change in the crystal phase and crystallite size of the films over 400°C.     

Kinematic optimal design of a paramill: A multi‐SP device

In this paper, a manipulability analysis of a new parallel‐type rolling mill, named “paramill,” in its conceptual design stage is investigated. The paramill considered uses two Stewart platforms (SPs) in opposite directions for the generation of 6 degree‐of‐freedom motions of individual work‐rolls. The objective of this new approach is to pursue an integrated control of the strip thickness, strip shape, pair‐crossing angle, uniform wear of the rolls, and tension of the strip. The forward/inverse kinematics problems are formulated. Two main kinematic parameters, the size of the base and the acute angle made by two neighboring joints for a given size of the work‐roll, have been determined in the way that the force and moment transmission from the actuators to the work‐rolls is maximized. © 2004 Wiley Periodicals, Inc.     

Modeling and control for a Gough‐Stewart platform CNC machine

In this paper, a complete dynamic model on task space for a 6 degrees of freedom (DOF) Gough‐Stewart platform‐type computer numerical control (CNC) machine is derived. The rotation terms of the legs are included for those inertia effects cannot be negligible in the machine tool applications. The formulation derived by means of the Euler‐Lagrange method is convenient for designing the adaptive control law. Also, the average‐type force model for end milling process is derived and included in the dynamic model and control. A composite adaptive control scheme is developed by use of filtering dynamics technique. An appropriate estimator gain is designed in the parameter adaptation law that is useful for estimating the selected important cutting parameters. Experimental results verify the proposed adaptive control scheme can achieve good tracking performance. © 2004 Wiley Periodicals, Inc.     

In Vitro hydrodynamic evaluation of prosthetic polymer heart valves in steady flow

Hydrodynamic comparison of two polymer valves with two mechanical valves is presented. The valves were perfused in a steady flow system, and comparisons between the valves were made on the transvalvular pressure distribution and drop, opening area, and leakage volume. Particular emphasis was placed on a slit-type bileaflet polymer valve which was newly designed and fabricated in our research group. The results showed that the functional characteristics of a slit-type bileaflet polymer valve compared favorably with that of mechanical valves. This valve may be a viable and inexpensive alternative, especially for short-term use in TAH or VAD systems.     

Design of parts and manufacturing systems for reliability and maintainability

The design of parts and manufacturing systems can be viewed from different perspectives. This paper discusses the design of parts and manufacturing systems from reliability and maintainability perspectives. A convenient method of considering reliability and maintainability is through the use of design rules which are based on empirical and theoretical knowledge. Four design rules for improvement of reliability and maintainability of systems are presented. The design rules are proven and substantiated with numerical results. The relationship between the design for reliability and maintainability rules and design for manufacturing process rules is discussed.