Synthesis,bioactivity and preliminary biocompatibility studies of glasses in the system CaO–MgO–SiO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>O–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–CaF<Subscript>2</Subscript>

New compositions of bioactive glasses are proposed in the CaO–MgO–SiO₂–Na₂O–P₂O₅–CaF₂ system. Mineralization tests with immersion of the investigated glasses in simulated body fluid (SBF) at 37°C showed that the glasses favour the surface formation of hydroxyapatite (HA) from the early stages of the experiments. In the case of daily renewable SBF, monetite (CaHPO₄) formation competed with the formation of HA. The influence of structural features of the glasses on their mineralization (bioactivity) performance is discussed. Preliminary in vitro experiments with osteoblasts’ cell-cultures showed that the glasses are biocompatible and there is no evidence of toxicity. Sintering and devitrification studies of glass powder compacts were also performed. Glass-ceramics with attractive properties were obtained after heat treatment of the glasses at relatively low temperatures (up to 850°C).     

Efficient Total Chemical Synthesis of 13C=18O Isotopomers of Human Insulin for Isotope‐Edited FTIR

Isotope‐edited two‐dimensional Fourier transform infrared spectroscopy (2 D FTIR) can potentially provide a unique probe of protein structure and dynamics. However, general methods for the site‐specific incorporation of stable ¹³C=¹⁸O labels into the polypeptide backbone of the protein molecule have not yet been established. Here we describe, as a prototype for the incorporation of specific arrays of isotope labels, the total chemical synthesis—via a key ester insulin intermediate—of 97 % enriched [(1‐¹³C=¹⁸O)Phe^B24] human insulin: stable‐isotope labeled at a single backbone amide carbonyl. The amino acid sequence as well as the positions of the disulfide bonds and the correctly folded structure were unambiguously confirmed by the X‐ray crystal structure of the synthetic protein molecule. In vitro assays of the isotope labeled [(1‐¹³C=¹⁸O)Phe^B24] human insulin showed that it had full insulin receptor binding activity. Linear and 2 D IR spectra revealed a distinct red‐shifted amide I carbonyl band peak at 1595 cm^?1 resulting from the (1‐¹³C=¹⁸O)Phe^B24 backbone label. This work illustrates the utility of chemical synthesis to enable the application of advanced physical methods for the elucidation of the molecular basis of protein function.     

Growth of unidirectional potassium dihydrogen orthophosphate single crystal by SR method and its characterization

Unidirectional <100> potassium dihydrogen orthophosphate (KDP) single crystals were grown for the first time by Sankaranarayanan-Ramasamy (SR) method. The <100> oriented seed crystals were mounted at the bottom of the glass ampoules and the crystal of 15 mm diameter, 65 mm height were grown by SR method. The grown crystals were characterized by high-resolution X-ray diffraction (HRXRD), etching studies. The HRXRD analysis indicates that the crystalline perfection is excellent without having any very low angle internal structural grain boundaries. Dislocation density is less in SR grown KDP compared to conventional method grown KDP.     

Investigation on Different Crystal Grains from the Multi-crystalline Silicon (mc-Si) Wafer

Silicon - We have studied the mc-Si wafers with different (hkl) planes. Initially, the wafer was chemically etched by the KOH (20wt%) and IPA (2%) in the Millipore water at 60&nbsp;°C for...     

A real-time hardware fault detector using an artificial neuralnetwork for distance protection

A real-time fault detector for the distance protection application, based on artificial neural networks, is described. Previous researchers in this field report use of complex filters and artificial neural networks with large structure or long training times. An optimum neural network structure with a short training time is presented. Hardware implementation of the neural network is addressed with a view to improve the performance in terms of speed of operation. By having a smaller network structure the hardware complexity of implementation reduces considerably. Two preprocessors are described for the distance protection application which enhance the training performance of the artificial neural network many fold. The preprocessors also enable real-time functioning of the artificial neural network for the distance protection application. Design of an object oriented software simulator, which was developed to identify the hardware complexity of implementation, and the results of the analysis are discussed. The hardware implementation aspects of the preprocessors and of the neural network are briefly discussed     

Influence of Process Parameters on Cu–Fly Ash Composite by Powder Metallurgy Technique

In this study influence of compaction pressure, sintering temperature, and sintering time on mechanical and wear behavior of the fly ash reinforced copper-based composites are analyzed. The composites were prepared by powder metallurgy (P/M) technique with copper as matrix, 5 and 10 wt% of fly ash as reinforcement. The green compacts were prepared at three different pressures such as 350, 400, and 450 MPa. The prepared green composites were sintered at 700, 800, and 900 °C for the time period of 30, 60, and 90 min, respectively. From the results it is observed that when the process parameter increases the density, hardness, compression strength, and wear resistance increases.     

Compact analytical model for single gate AlInSb/InSb high electron mobility transistors

We have developed a 2D analytical model for the single gate Al In Sb/In Sb HEMT device by solving the Poisson equation using the parabolic approximation method.The developed model analyses the device performance by calculating the parameters such as surface potential,electric field distribution and drain current.The high mobility of the Al In Sb/In Sb quantum makes this HEMT ideal for high frequency,high power applications.The working of the single gate Al In Sb/In Sb HEMT device is studied by considering the variation of gate source voltage,drain source voltage,and channel length under the gate region and temperature.The carrier transport efficiency is improved by uniform electric field along the channel and the peak values near the source and drain regions.The results from the analytical model are compared with that of numerical simulations(TCAD) and a good agreement between them is achieved.     

New approach for prediction of influence of vehicle dynamics parameters on instability of unmanned track vehicle using robotic approach

Journal of Mechanical Science and Technology - Achieving stability of unmanned, heavy tracked vehicles is challenging, especially under conditions of teleoperation because the remote operator...     

Nonglycosidic Agonists of Invariant NKT Cells for Use as Vaccine Adjuvants

Based on the crystal structures of human α‐GalCer–CD1d and iNKT–α‐GalCer–CD1d complexes, nonglycosidic analogues of α‐GalCer were synthesized. They activate iNKT cells resulting in dendritic cell maturation and the priming of antigen‐specific T and B cells. Therefore, they are attractive adjuvants in vaccination strategies for cancer and infectious diseases.

     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.