Effect of chemical treatments of sugar beet fibre on their physico-chemical properties and on their in-vitro fermentation

Chemically treated and dried sugar beet fibres were fermented in vitro in order to study the effects of chemical and physico-chemical parameters of dietary fibre on their colonic fermentation. Sugar beet fibre was treated with dilute alkali, removing mainly acetyl and methyl ester groups, and/or with dilute acids eliminating arabinose, galactose and certain uronic acid residues. The chemical treatments led to an increase in the hydration properties and fermentability by improvement of the accessibility of the remaining polysaccharides. However, if the chemically treated fibres were dried under harsh conditions (100°C), their hydration properties and their fermentability were limited, probably because of structural collapse of the fibre matrix. Whatever the conditions for chemical treatments and drying of the sugar beet fibres, it was possible to predict their fermentability from the water-binding capacity. Because of the relationship between the physiological effects of dietary fibres and the extent to which they are fermented, this result underlines the importance of the physico-chemical characterisation of the fibre in order to acquire a better knowledge of their physiological effects.     

Characterization of 1.55-μm pulses from a self-seededgain-switched Fabry-Perot laser diode using frequency-resolved opticalgating

The intensity and frequency chirp of picosecond pulses from a self-seeded gain-switched Fabry-Perot laser diode have been directly measured using the technique of frequency-resolved optical gating. Measurements over an output sidemode suppression ratio (SMSR) range of 15-35 dB show that higher SMSR's are associated with an increasingly linear frequency chirp across the output pulses. This complete pulse characterization allows the conditions for optimum pulse compression to be determined accurately, and indicates that transform-limited, pedestal free pulses can be obtained at an SMSR of 35 dB     

Continuous-wave operation of GaInAs-AlGaAsSb quantum cascade lasers

We report on the demonstration of continuous-wave (CW) operation of GaInAs-AlGaAsSb quantum cascade (QC) lasers. By placing a 2.5-/spl mu/m-thick gold layer on both sides of the laser ridge to extract heat from the active region in the lateral direction, together with mounting the device epilayer down, we have achieved CW operation of GaInAs-AlGaAsSb QC lasers composed of 25 stages of active/injection regions. The maximum CW operating temperature of the lasers is 94 K, and the emission wavelength is around /spl lambda//spl sim/4.65 /spl mu/m. For a device with the size of 10/spl times/2000 /spl mu/m/sup 2/, the CW optical output power per facet is 13 mW at 42 K and 4 mW at 94 K. The CW threshold current density is 1.99 kA/cm/sup 2/ at 42 K, and 2.08 kA/cm/sup 2/ at 94 K, respectively.     

Influence of Bulky Organo‐Ammonium Halide Additive Choice on the Flexibility and Efficiency of Perovskite Light‐Emitting Devices

Perovskite light‐emitting diodes (LEDs) require small grain sizes to spatially confine charge carriers for efficient radiative recombination. As grain size decreases, passivation of surface defects becomes increasingly important. Additionally, polycrystalline perovskite films are highly brittle and mechanically fragile, limiting their practical applications in flexible electronics. In this work, the introduction of properly chosen bulky organo‐ammonium halide additives is shown to be able to improve both optoelectronic and mechanical properties of perovskites, yielding highly efficient, robust, and flexible perovskite LEDs with external quantum efficiency of up to 13% and no degradation after bending for 10 000 cycles at a radius of 2 mm. Furthermore, insight of the improvements regarding molecular structure, size, and polarity at the atomic level is obtained with first‐principles calculations, and design principles are provided to overcome trade‐offs between optoelectronic and mechanical properties, thus increasing the scope for future highly efficient, robust, and flexible perovskite electronic device development.     

Photovoltaic Devices: High‐Performance Organic Solar Cells with Spray Coated Hole‐Transport and Active Layers (Adv. Funct. Mater. 1/2011)

In this study, we report high performance organic solar cells with spray coated hole‐transport and active layers. With optimized ink formulations we are able to deposit films with controlled thickness and very low surface roughness (<10 nm). Specifically we deposit smooth and uniform 40 nm thick films of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as well as films composed of a mixture of poly(3‐hexyl thiophene) (P3HT) and the C₆₀‐derivative (6,6)‐phenyl C61‐butyric acid methyl ester (PCBM) with thicknesses in the range 200–250 nm. To control film morphology, formation and thickness, the optimized inks incorporate two solvent systems in order to take advantage of surface tension gradients to create Marangoni flows that enhance the coverage of the substrate and reduce the roughness of the film. Notably, we achieve fill factors above 70% and attribute the improvement to an enhanced P3HT crystallization, which upon optimized post‐drying thermal annealing results in a favorable morphology. As a result, we could extend the thickness of the layer to several hundreds of nanometers without noticing a substantial decrease of the transport properties of the layer. By proper understanding of the spreading and drying dynamics of the inks we achieve spray coated devices with power conversion efficiency of 3.75%, with fill factor, short circuit current and open circuit voltage of 70%, 9.8 mA cm^?2 and 550 mV, respectively.     

Polychlorinated biphenyls (PCB) in fish from hatcheries and clarifying ponds

The concentrations of six selected single polychlorinated biphenyl (PCB) congeners, for which legal tolerance levels became valid in 1988, and the congener no. 49 (2,2',4,5'-tetrachlorobiphenyl) were determined in the muscle tissue of 58 fishes from fish hatcheries and in 17 fishes from settle ponds. The fish were taken from flowing waters in the years 1986 and 1987. High and low chlorinated biphenyls were present in each sample, but the concentration of the low chlorinated biphenyls was distinctly lower than that of the higher chlorinated ones. Nevertheless these results demonstrate the intake of components of low chlorinated technical PCB mixtures in the environment and food chains. Compared with the investigations carried out in 1980/81 in fishes from fish hatcheries, a decrease of PCB contamination in the muscle tissues with regard to the technical mixture Clophen A 60 was observed. This is in accordance with the results our team obtained a short time previously in muscle tissue from foxes and in food-stuffs. The concentration of all PCB congeners determined in the muscle tissue from fish of settle ponds was significantly higher than in the tissue from fish taken from hatcheries. Thus, the PCB content depends on the PCB load in different environments. Therefore, fishes can be useful as bioindicators for the intake of low and high chlorinated PCB congeners in aquatic ecosystems.     

Theoretical approach to estimate laser process parameters for drilling in crystalline silicon

This paper presents a simple method for estimating the ablation rate during drilling processes in crystalline silicon wafers. Using data from literature, the physical process of material heating, melting, and ejection can be estimated on a time scale and leads to a temporal separation of the pulse duration in two parts. The latter one offers a theoretical determination of the expected average ablation rate. The results of this approximation coincide with experimental values and offer solutions to increase drilling efficiency. The experiments were done with a q‐switched solid‐state laser emitting at 1064 nm wavelength at pulse durations between 810 ns and 1440 ns. Copyright © 2010 John Wiley & Sons, Ltd.     

Tunable transform-limited pulse generation using self-injectionlocking of an FP laser

Wavelength-tunable, near transform-limited pulses have been generated using a Fabry-Perot laser diode coupled to a fiber loop containing a fiber Fabry-Perot resonator (FFPR) and a polarization controller. The ratio of transmitted to reflected light from the loop can be adjusted using the polarization controller. Single-mode operation of the gain-switched laser is achieved by self-injection locking, which is induced by light reflected from the fiber loop. The resulting output pulse has a time-bandwidth product of 0.4 and is tunable over about 15 nm by varying the tuning voltage of the FFPR     

Degradation of cell wall material of apple and wheat bran by human faecal bacteria in vitro

The effect of the structures of plant cell walls and their component polymers on the degradability of dietary fibre by bacteria of the human colon was investigated by inoculating culture media containing cell wall materials of apple and wheat bran with slurries of human faeces which were then incubated for periods of up to 72 h. In the apple substrates the amounts of pectic polysaccharides were extensively depleted after 12 h, and after 24 h over 90% of the initial carbohydrate had been degraded. Material which remained after incubation was probably comprised of highly branched fragments of rhamnogalacturonans, cross-linked by phenolics and proteins, highly branched fragments of cross-linked xyloglucans, and degraded cellulose. In wheat bran the aleurone layer was preferentially degraded, but the glucuronoarabinoxylans, which were cross-linked by phenolic groups, and the lignified outer layers of the bran were very resistant to attack. Bacteria adhered mainly to the broken or damaged surfaces of the plant cell walls, and in the more resistant tissues only penetrated the intercellular regions.     

Answer Justification in Diagnostic Expert Systems?Part II: Supporting Plausible Justifications

This paper describes how a new method for answer justification in abductive diagnostic expert systems, presented in a preceding companion paper (Part I), can be supported in a domain-independent fashion. Both the issues of explaining why a disorder is included in a differential diagnosis and why it is ranked the way it is relative to its "competitors" are addressed. This approach to answer justification is then compared to previous work on answer justification in medical expert systems.