Image blur and energy broadening effects in XPEEM

We report image blurring and energy broadening effects in energy-filtered XPEEM when illuminating the specimen with soft X-rays at high flux densities. With a flux of 2×10¹³ photons/s, the lateral resolution in XPEEM imaging with either core level or secondary electrons is degraded to more than 50 nm. Fermi level broadening up to several hundred meV and spectral shift to higher kinetic energies are also systematically observed. Simple considerations suggest that these artifacts result from Boersch and Loeffler effects, and that the electron-electron interactions are strongest in the initial part of the microscope optical path. Implications for aberration corrected instruments are discussed.     

A Secure Correspondent Router Protocol for NEMO Route Optimization

The Network Mobility (NEMO) protocol is needed to support the world-wide mobility of aircraft mobile networks across different access networks in the future IPv6 based aeronautical telecommunications network (ATN). NEMO suffers from the constraint that all traffic has to be routed via the home agent though. The already existing correspondent router (CR) protocol solves this triangular routing problem and permits to route packets on a direct path between the mobile network and the ground based correspondent nodes. We identify security deficiencies of this protocol that make it unsuitable for use within the ATN. We therefore propose a new route optimization procedure based on the CR protocol that provides a higher level of security. We evaluate our new protocol in three ways. We first conduct a simulation based handover performance study using an implementation of a realistic aeronautical access technology. We then investigate the mobility signaling overhead. Finally, we specify a threat model applicable for the aeronautical environment and use it to perform a security analysis of both the old and our new protocol. It is shown that our protocol is not only more secure but also provides better handover latency, smaller overhead in the aeronautical scenario and a higher level of resilience when compared to the original CR protocol.     

Relationships between process, microstructure and properties of molded zirconia micro specimens

Due to size effects the mechanical behavior of micro-components with dimensions in the range of some 100 μm and structure details of about 10 μm differs markedly from those of larger components. This is a crucial aspect for the design of micro-components for applications where demands for high strength are critical. The present study, which was performed in the frame of the Collaborative Research Centre 499 (SFB 499), approaches this issue by investigating the relationship between production process, microstructure and the mechanical properties of micro-specimens made from zirconia using two different feedstocks. The specimens were produced by a sintering process. The sintering temperature was varied between 1,300 and 1,500°C. Mechanical and tribological behavior of the specimens was determined by three-point bending tests as well as static and sliding friction tests, respectively. Properties derived from these tests were then correlated to the surface states in the specimens such as porosity, edge radius and roughness. The strength of the micro-specimens was found to be significantly influenced by these surface features. Whilst low porosity alone is not sufficient for high strength, notch effects resulting from pores as well as surface roughness can lower the strength. With increasing edge radius the strength of the material also increases. The porosity, edge radius and surface roughness were mathematically correlated with the strength to allow for a forecast. Within the SFB 499 feedstocks with specific properties were designed and reliable processes were developed to guarantee desirable surface roughness and porosity in the specimens. A characteristic bending strength of about 2,000 MPa is realizable in the micro-specimens within a good statistical reliability. The tribological tests revealed that the wear properties of the zirconia micro-components are strongly dependent on the quality of the feedstock.     

3D-Druck für Hochvakuumanwendungen

To mark our anniversary, we are presenting articles that have been particularly appreciated by readers of our online edition once again in print. Here: 3D-Printing for High Vacuum Applications 3D printing technology has made the leap from a home-based private practice to industrial manufacturing. Due to the increasing reliability of printers and increasing material diversity, especially in the metal sector, double-digit percentage growth rates are possible in the coming years. This thesis deals with the manufacture of parts made by 3D printing for high vacuum application. Different components are printed and examined for their vacuum compatibility. As shown furthermore, conventionally made standard components can be vacuum sealed to printed parts, which enables cost-effective production of more complex components, such as e.g. a vacuum chamber allows. In addition, functional components can already be realized in the manufacturing process. The integration of a system of flow channels directly into the wall of a chamber is just one example. Thus, such a chamber can be heated during evacuation and effectively cool in later operation.     

Cardiovascular function and brain metabolites in normal weight and intrauterine growth restricted newborn piglets--effect of mild hypoxia

In order to clarify the influence of intrauterine growth restriction on systemic hemodynamics, catecholamine response, and regional distribution of brain energy metabolites per se and during mild hypoxic episodes a study was performed in thirty newborns with a well-characterized state of intrauterine and intra-natal development. Thirty animals were divided into fifteen normal weight piglets (NW) and fifteen intrauterine growth restricted (IUGR) piglets according to their birth weight. Category "NW" covered animals with a birth weight of > 40th percentile; IUGR category covered animals with a birth weight of > 5th and < 10th percentiles. Animals were anesthetized with halothane in 70% nitrous oxide and 30% oxygen and after immobilization artificially ventilated. The acid-base balance and blood gas values at baseline conditions were similar within the different groups investigated and consistent with other data obtained from anesthetized and artificially ventilated newborn piglets. Mild hypoxic hypoxia which was induced by lowering the FiO2 from 0.35 to 0.15 resulted in reduced arterial pO2 (NW: from 115 +/- 37 mmHg to 39 +/- 7 mmHg; IUGR: from 117 +/- 23 mmHg to 39 +/- 3 mmHg; p < 0.05), but arterial pH and pCO2 remained unchanged. Under baseline conditions arterial blood pressure, cardiac output, and myocardial contractility, expressed as dp/dt(max) and plasma catecholamine values were similar in all groups studied. Heart rate was slightly increased in IUGR (p < 0.05). Mild hypoxia led to a strong increase of myocardial contractility in NW as well as IUGR piglets to 2.4 and 2.7 fold and remained increased during recovery (p < 0.05). Moreover, total peripheral resistance was enhanced at the end of recovery period in IUGR animals (p < 0.05). There was a significant increase of epinephrine (E) in NW animals in comparison to sham-operated animals (p < 0.05). Interestingly, during reoxygenation the further increase in E and norepinephrine (NE) levels were enhanced in the animals which suffered from mild hypoxia (p < 0.05). Regional distribution of brain tissue metabolites was partly affected by intrauterine growth restriction. In particular, brain tissue glucose content was strongly reduced by 65 to 72 per cent in all brain regions investigated. Mild hypoxia led to an increase of about 30 percent in NW animals (p < 0.05). In IUGR piglets the percentage increase of brain glucose content was on an average more pronounced but with considerably higher variance. Also, a strong increase of brain lactate content appeared here (p < 0.05). In contrast, brain tissue ATP was quite similar in all groups studied, but brain creatine phosphate was significantly reduced in some forebrain structures of IUGR piglets after mild hypoxia (figure 2, p < 0.05). In summary, this investigation provides information on cardiovascular functions and brain metabolites of normal weight and naturally occurring growth restricted newborn piglets. Mild hypoxemia was well-tolerated from both animal groups. It is suggested that lactate may play a significant role as a source for brain energy production in the newborn IUGR piglets.     

Configuration Maintenance for Distributed Applications Management

The MANDAS project has defined a layered architecture for the management of distributed applications. In this paper we examine a vertical slice of this architecture, namely the management applications and services related to configuration management. We introduce an information model which captures the configuration information for distributed applications and discuss a repository service based on the model. We define a set of services and management applications to support maintenance of configuration information, and describe how the different types of configuration information are collected. Finally, we present two management applications that use configuration information.