Demosaicing algorithms for area- and line-scan cameras in print inspection

Most color image sensors use color filter arrays (CFA). With this sensor design the captured information at each sensor pixel position is restricted to a specific spectral portion (typically red, green and blue bands). To obtain the missing color responses at each pixel position, so-called CFA demosaicing algorithms are commonly used. We propose two new CFA demosaicing algorithms, which are well suited for industrial print inspection with respect to the requirements in accuracy and speed. As a main contribution, we introduce novel demosaicing algorithms for specific high-speed color digital time delay and integration (DTDI) CFA line-scan cameras. We compare the suggested CFA demosaicing algorithms to state-of-the art algorithms for area and line-scan camera operation modes. We show that the two new algorithms perform superior to conventional algorithms as indicated by reconstruction error.     

Curie temperature enhancement in partially disordered Sr2FeReO6 double perovskites

Two samples of the double perovskite Sr₂FeReO₆ have been synthesized by (1) soft-chemistry procedures and (2) high-pressure methods. The sample prepared by a soft-chemistry technique presents 75% of Fe/Re cationic order whereas the one prepared by the application of high external pressure generates a complete Fe/Re cationic order. Both materials have been characterized by X-ray diffraction, neutron powder diffraction and magnetic measurements. The magnetic properties of both oxides have been compared, observing that the specimen prepared via soft-chemistry procedures presents an enhanced Curie temperature of 445 K, although the sample prepared under high-pressure techniques displays a superior saturation magnetization. This behavior is explained as a consequence of the presence, in the partially disordered sample, of Fe-rich islands containing strong Fe-O-Fe antiferromagnetic couplings, able to nucleate and lock the ferromagnetic interactions of the ordered regions, thus increasing the global Curie temperature of the partially disordered material.     

Rheokinetic of a gelled resol resin curing by dynamic‐temperature rheometry based on rectangular torsion strain

The rheological behavior of a phenolic resol resin during its curing process was studied through a rheological dynamic‐temperature analysis. Two heating ramps from 0 to 120°C (1°C/min) and from 0 to 150°C (5°C/min) were performed. The resin's complex viscosity data were obtained by applying a rectangular torsion strain. The overall change of complex viscosity with temperature was due to a combination of thermal softening, described by the Andrade equation, and the resin crosslinking process. The four‐ and six‐parameter Arrhenius rheokinetic model was applied to the profiles obtained for the resin's complex viscosity, and the viscous flow and activation energies of curing kinetics were established. Two calculation methods are proposed to obtain the flow and curing parameters of the material. The six‐parameter Arrhenius model was more suitable for predicting changes in the resin's complex viscosity, obtaining an activation energy of ～ 38.0 kJ/mol for the resol resin curing process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A universal fluid cell for the imaging of biological specimens in the atomic force microscope

Recently, atomic force microscope (AFM) manufacturers have begun producing instruments specifically designed to image biological specimens. In most instances, they are integrated with an inverted optical microscope, which permits concurrent optical and AFM imaging. An important component of the set‐up is the imaging chamber, whose design determines the nature of the experiments that can be conducted. Many different imaging chamber designs are available, usually designed to optimize a single parameter, such as the dimensions of the substrate or the volume of fluid that can be used throughout the experiment. In this report, we present a universal fluid cell, which simultaneously optimizes all of the parameters that are important for the imaging of biological specimens in the AFM. This novel imaging chamber has been successfully tested using mammalian, plant, and microbial cells. Microsc. Res. Tech. 76:357–363, 2013. © 2013 Wiley Periodicals, Inc.     

Influence of processing on the levels of amines and proline and on the physico-chemical characteristics of concentrated orange juice

The influence of processing on the levels of bioactive amines and proline as well as on some physico-chemical characteristics of concentrated orange juice was investigated. Samples were collected at seven points of a production line on three non-consecutive days, and analysed for the levels of 12 bioactive amines, proline, and reducing and non-reducing sugars, and for some physico-chemical characteristics. Among the amines analysed, only putrescine, spermidine and synephrine were found in the samples at all processing stages. Significant differences were observed for spermidine and total amine levels throughout processing. Synephrine and putrescine were resistant to processing. Proline levels changed significantly throughout processing, as did levels of reducing and non-reducing sugars. The pH varied from 3.59 to 3.72, acidity from 0.873 to 0.918 g citric acid/100 mL, and density from 1.0378 to 1.0970 g/mL. Among these parameters, pH, acidity and density were significantly affected by processing.     

Combined ab initio and experimental study of A2 + L21 coherent equilibria in the Fe–Al–X (X = Ti,Nb, V) systems

A combined theoretical and experimental study of ordering and phase separation in α-Fe alloys in the Fe–Al–X (X = Ti, Nb, V) systems is presented. The theoretical part is dedicated to the assessment of the BCC-based phase equilibrium diagram in the iron-rich zone of the ternary systems via a truncated cluster expansion, through the combination of Full-Potential-Linear augmented Plane Wave (FP-LAPW) electronic structure calculations and of Cluster Variation Method (CVM) thermodynamic calculations in the irregular tetrahedron approximation. The stability and the solid solubility of Al in the Fe₂X Laves phases are also included in the discussion of the ternary BCC ground state diagrams. The approach was employed in order to explore particular vertical sections of the ternary systems where a coherent two-phase microstructure can be generated with an optimal combination of volume fraction of Fe₂AlX (L2₁) Heusler type precipitates and Al content in the α-Fe (A2) matrix. The results indicate that in the Fe–Al–Ti and Fe–Al–V systems there are two kinds of phase separations of the BCC phase, (A2+ L2₁) and (B2 (FeAl structure) + L2₁). A tie-line separates both two-phase fields that shrinks and moves toward the Fe-X binary system while its direction remains almost parallel as the temperature increases. Selected experiments were performed on three alloys of the Fe–Al–Ti system belonging to vertical sections that contain this tie-line. The microstructure and composition of the matrix and precipitate phases were characterized by transmission electron microscopy (TEM) and Energy Dispersive Spectroscopy (EDS), the theoretical predictions were borne out.     

Neutral glycosphingolipid content of ovine milk

Milk glycosphingolipids (GSL) have been reported to participate in the newborn's defense against pathogens. Taking this into account, in this study we determined the neutral GSL content of ovine milk, including its fatty acid profile. Its role in bacterial adhesion was also addressed by immunodetection of separate GSL in a high-performance thin-layer chromatography overlay assay. Ovine milk has a neutral GSL pattern similar to human milk and includes lactosylceramide (LacCer; 45.7%), monohexosylceramide (glucosylceramide and galactosylceramide, 31.2%), globotriaosylceramide (Gb3; 19.1%), and globotetraosylceramide (Gb4; 3.5%). Globotriaosylceramide and Gb4 are present in human but not bovine milk. Neutral GSL contained C23:0 and C24:0 as the most abundant fatty acids, a finding consistent with its high content of very long chain fatty acids (longer than C20). Most fatty acids were saturated and had a low content of polyunsaturated fatty acids. Bovine enterotoxigenic Escherichia coli strains bound strongly to LacCer and showed a weak binding to monohexosylceramide. The K99 strain also bound strongly to Gb3, and F41 to Gb4. Lactosylceramide, monohexosylceramide, and Gb3 were also observed to bind to human uropathogenic E. coli strains. The results reported here show the ability of neutral GSL in ovine milk to bind to E. coli strains. These compounds could be used as an alternative and available source to supplement infant or bovine formulas with a view to preventing bacterial infections.     

Simulations of biomolecules: Characterization of the early steps in the pH-induced conformational conversion of the hamster,bovine and human forms of the prion protein

As computer power increases, so too does the range of interesting biomolecular phenomena and properties that can be simulated. It is now possible to simulate complicated protein conformational changes at ambient or physiological temperatures. In this regard, we are attempting to map the conformational transitions of the normal, cellular prion protein (PrP(C)) to its infectious scrapie isoform (PrP(Sc)), which causes neurodegenerative diseases in many mammals. These two forms have identical sequences and are conformational isomers, with heightened formation of beta-sheet structure in the scrapie form. Conversion can be triggered by lowering the pH, but thus far it has been impossible to characterize the conformational change at high resolution using experimental methods. Therefore, to investigate the effect of acidic pH on PrP conformation, we have performed molecular-dynamics simulations of hamster, human and bovine forms of the prion protein in water at neutral and low pH. In all cases the core of the protein is well maintained at neutral pH. At low pH, however, the protein is more dynamic, and the sheet-like structure increases both by lengthening of the native beta-sheet and by addition of a portion of the N-terminus to widen the sheet by another 2-3 strands.     

Evaluation of high-frequency sinusoidal waveform superposed with third harmonic for stable operation of metal halide lamps

In this paper, a novel topology to supply metal halide (MH) lamps using sinusoidal waveform with superposed third harmonic is proposed. By employing this technique, the lamp is supplied with an approximated square waveform, but it reduces the harmonic content and, therefore, electromagnetic interference and radio-frequency interference. The proposed topology is analyzed and designed for a 35-W MH lamp with ceramic discharge tube. Experimental results prove that lamp operation is stable at operating frequencies where acoustic resonances were previously observed when supplied with purely sinusoidal waveforms. In conclusion, the proposed technique could be a feasible solution for stable operation of MH lamps.