Sensitivity of photon-counting based K-edge imaging in X-ray computed tomography

The feasibility of K-edge imaging using energy-resolved, photon-counting transmission measurements in X-ray computed tomography (CT) has been demonstrated by simulations and experiments. The method is based on probing the discontinuities of the attenuation coefficient of heavy elements above and below the K-edge energy by using energy-sensitive, photon counting X-ray detectors. In this paper, we investigate the dependence of the sensitivity of K-edge imaging on the atomic number Z of the contrast material, on the object diameter D , on the spectral response of the X-ray detector and on the X-ray tube voltage. We assume a photon-counting detector equipped with six adjustable energy thresholds. Physical effects leading to a degradation of the energy resolution of the detector are taken into account using the concept of a spectral response function R(E,U) for which we assume four different models. As a validation of our analytical considerations and in order to investigate the influence of elliptically shaped phantoms, we provide CT simulations of an anthropomorphic Forbild-Abdomen phantom containing a gold-contrast agent. The dependence on the values of the energy thresholds is taken into account by optimizing the achievable signal-to-noise ratios (SNR) with respect to the threshold values. We find that for a given X-ray spectrum and object size the SNR in the heavy element's basis material image peaks for a certain atomic number Z. The dependence of the SNR in the high- Z basis-material image on the object diameter is the natural, exponential decrease with particularly deteriorating effects in the case where the attenuation from the object itself causes a total signal loss below the K-edge. The influence of the energy-response of the detector is very important. We observed that the optimal SNR values obtained with an ideal detector and with a CdTe pixel detector whose response, showing significant tailing, has been determined at a synchrotron differ by factors of about two to three. The potentially very important impact of scattered X-ray radiation and pulse pile-up occurring at high photon rates on the sensitivity of the technique is qualitatively discussed.     

Low Power Computing Paradigms Based on Emerging Non-Volatile Nanodevices

Traditional digital processing approaches are based on semiconductor transistors,which suffer from high power consumption,aggravating with technology node scaling.To solve definitively this problem,a number of emerging non-volatile nanodevices are under intense investigations.Meanwhile,novel computing circuits are invented to dig the full potential of the nanodevices.The combination of non-volatile nanodevices with suitable computing paradigms have many merits compared with the complementary metal-oxide-semiconductor transistor(CMOS)technology based structures,such as zero standby power,ultra-high density,non-volatility,and acceptable access speed.In this paper,we overview and compare the computing paradigms based on the emerging nanodevices towards ultra-low dissipation.     

Centralized power control and routing policies for multihop wireless networks

This paper investigates joint power control and routing policies for general multihop wireless networks when all the transmitting nodes are subject to a long-term average power constraint. The main contribution of this paper is to propose online power and rate control algorithms and prove that these policies stabilize the entire queuing network whenever the packet arrival rates at each node are in the corresponding region of achievable rates. The online policies are time varying and based on the queue size at each node and the instantaneous channel conditions. The theoretical results are supported by simulations for the illustrative cases of both a multiple-access channel and a relay channel.     

β-Carotene and Ascorbic Acid Retention in Fresh and Processed Vegetables

Broccoli, carrots, and green beans (grown in 2 consecutive years) were randomly divided into 3 treatments: fresh-refrigerated (F-R), frozen (FZ) or canned (C) (carrots only). FZ or C vegetables were processed within 24 h and stored for up to 1 yr. F-R vegetables were held at 4 °C for 3 wk (broccoli and green beans) or 6 mo (carrots). Trans b-carotene (Tb-C) and total ascorbic acid (AA) were determined at specified times, before and after microwave cooking. Vitamin content differed between years due to environmental conditions. Blanching resulted in AA loss, but retention remained stable after freezing broccoli and green beans. F-R green beans lost >90% AA after 16 d storage. Linear decreases in AAwere found in most F-R or FZ vegetables. Tb-C decreased slightly during freezer storage. Reductions in Tb-C occurred in canned carrots. Microwave cooking had minimal effects on AA or Tb-C.     

Transport Properties and Cationic Substitutions in Sr<Subscript>2</Subscript>IrO<Subscript>4</Subscript>

We realized cationic substitutions in Sr₂IrO₄ and measured resistivity, thermoelectric power, and the Hall coefficient. A two-carrier model, reflecting the presence of thermally activated carriers at high temperature, qualitatively explains the behavior of the Hall coefficient of Sr_1.95La_0.05IrO₄ in comparison with Sr₂IrO₄. Concerning the substitution of Ir by different transition metals, Pt with 5d orbitals does not affect the transport properties, contrary to Ti and Rh with 3d and 4d orbitals, respectively. This may be explained by strong spin–orbit coupling involved in Ir and Pt, in comparison with 3d or 4d transition metals.     

透视Virtex-4超高效且低功耗的奥秘

随着工艺技术越来越小型化、越来越快速,通常会增加功耗,这时在功耗和效能上往往必须有所取舍,因而器件功耗一直是半导体业的首要课题。来自Xilinx的新型Virtex-4FPGA采用创新的架构特性和先进的IC设计技术,可以在显著降低功耗的同时,依然不损害其性能,且和90nm工艺技术特征尺寸减小的趋势不谋而合。本文将探讨XilinxIC设计者如何在高性能Virtex-4FPGA中实现很高的功率效率。     

A comparison of noninvasive reconstruction of epicardial versus transmembrane potentials in consideration of the null space

We compare two source formulations for the electrocardiographic forward problem in consideration of their implications for regularizing the ill-posed inverse problem. The established epicardial potential source model is compared with a bidomain-theory-based transmembrane potential source formulation. The epicardial source approach is extended to the whole heart surface including the endocardial surfaces. We introduce the concept of the numerical null and signal space to draw attention to the problems associated with the nonuniqueness of the inverse solution and show that reconstruction of null-space components is an important issue for physiologically meaningful inverse solutions. Both formulations were tested with simulated data generated with an anisotropic heart model and with clinically measured data of two patients. A linear and a recently proposed quasi-linear inverse algorithm were applied for reconstructions of the epicardial and transmembrane potential, respectively. A direct comparison of both formulations was performed in terms of computed activation times. We found the transmembrane potential-based formulation is a more promising source formulation as stronger regularization by incorporation of biophysical a priori information is permitted.     

A 90-nm CMOS Low-Power GSM/EDGE Multimedia-Enhanced Baseband Processor With 380-MHz ARM926 Core and Mixed-Signal Extensions

To meet the widely varying speed and power requirements of multifunctional mobile devices, an appropriate combination of technology features, circuit-level low-power techniques, and system architecture is implemented in a GSM/Edge baseband processor with multimedia and mixed-signal extensions. Power reduction techniques and performance requirements are derived from an analysis of relevant use cases and applications. The 44 mm² baseband processor is fabricated in a 90-nm low-power CMOS technology with triple-well option and dual-gate oxide core devices. The ARM926 core achieves a maximum clock frequency of 380 MHz at 1.4-V supply due to the usage of thin oxide (1.6 nm) devices. Power dissipation can be adapted to the performance requirements by means of combined voltage and frequency scaling to reduce active power consumption in medium-performance mode by 68%. To reduce leakage currents during standby mode, large SRAM blocks, nFET sleep transistors, and circuit components with relaxed performance requirements are implemented using devices with 2.2-nm gate oxide thickness     

The U.S. role in global internet governance

Who should control the Internet? A dozen years after the Internet became a mass medium, this issue has continued to grow in urgency, becoming white hot in fall 2005. At the September 2005 preparatory meeting for the UN World Summit on the Information Society (WSIS), a coalition of countries criticized the United States' unilateral control of the Internet's domain name system (DNS) and proposed the establishment of a multinational Council to supervise it. This proposal emerged from the Final Report of the UN Working Group on Internet Governance. Researchers from the Internet Governance Project, a university-based consortium for policy analysis, have concluded that the United States should internationalize governance of the Internet, but in a way that avoids intrusive, centralized control.