A lower carbon footprint process for production of metals from their oxide sources

This paper will describe the solid oxide membrane (SOM) process as it applies to the energy-efficient and environmentally sound production of magnesium from magnesium oxide. Also, it will describe the challenges encountered while using this process for the production of transition metals like titanium from its higher oxides. Finally, a novel magnesiothermic SOM process will be proposed that can enable production of transition metals from its higher oxides.     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

A Survey on the Numerics and Computations for the Landau-Lifshitz Equation of Micromagnetism

The Landau-Lifshitz (LL)equation of micromagnetism governs rich variety of the evolution of magnetization patterns in ferromagnetic media. This is due to the complexity of physical quantities appearing in the LL equation. This complexity causes also an interesting mathematical properties of the LL equation: nonlocal character for some quantities,nonconvex side-constraints, strongly nonlinear terms. These effects influence also the numerical approximations. In this work, recent developments on the approximation of weak solutions, together with the overview of well-known methods for strong solutions,are addressed. Author is supported by the Fund for Scientific Research - Flanders FWO (Belgium).     

朴素的认识

2月20日，“中国国际建筑艺术实践展”项目开工典礼在南京珍珠泉佛手湖工地现场举行。此时距这个项目正式启动已经过了一年半了。从主办方提供的资料看．参展建筑师的设计方案可谓各具特色，但也许正是这种有意为之的特色使得建筑真的成了一件展品。如果说迪斯尼乐园里那些城堡和尖塔是孩子们的大玩具的话，那么佛手湖畔这将要建成的24栋建筑就是成人们的大玩具。     

The dynamic effects and compensation of load transitions in robotic systems

The problem of a robot handling a payload typically involves pre-load, load, and post-load stages, and payload transitions between these stages. Although considerable work has focused on the control of robots carrying payloads, few consider the problem of load transitions—one of the most important effects on system performance. This article studies these transitions and presents a compensation method. It is shown that load transitions lead to abrupt (jump) parameters and uncertain transition times in the robot/payload model. A control strategy is proposed that takes the load transitions into account and guarantees the stable path tracking of robots in the face of these transitions. The effectiveness of the proposed control strategy is verified via simulation. © 1994 John Wiley & Sons, Inc.