Mechanism analysis of gate-induced drain leakage in off-state n-MOSFET

An analytical expression for both band-to-band and band-trap-band indirect tunnelings is used to study the gate-induced drain leakage (GIDL) current of MOSFETs measured before and after hot-carrier stress. The voltage and temperature dependence of GIDL are characterized. Both results show that interface traps situated near the midgap participate in the conduction of GIDL, and band-trap-band indirect tunneling could be the major mechanism. This is further supported by the fact that the percentage increase in GIDL induced by hot-carrier stress is about the same as the corresponding increase in interface-trap density. On the other hand, under low-field conditions, trap-assisted Poole–Frenkle emission dominates over tunneling for temperatures even well below room temperature.     

Effects of thymectomy and glucocorticoid therapy on peripheral lymphocytes in myasthenia gravis

Clinical manifestations and peripheral blood lymphocyte subset changes were studied in patients with myasthenia gravis (MG) to elucidate the mechanism of clinical improvement following treatment, with thymectomy (Tx) or glucocorticoid (GC) therapy. The changes found were: 1. There was a significant increase in percentages of CD3+, CD29+ CD4+ cells and CD4/CD8 ratio and a significant decrease in percentages of CD8+ and CD16,56+ cells in patients who had never been treated with any immune therapy. 2. After Tx or GC therapy, CD3+ and CD4+, CD29+ cells were decreased, but the number CD19+ and CD16, CD56 cells did not change. 3. Tx had a special effect on CD8+ cells. In most of the patients who showed clinical improvement after Tx, CD8+ cells were increased and CD4/CD8 ratio wad decreased. 4. Anti-acetylcholine receptor (AChRAb) titers were markedly decreased after GC therapy. These results indicate that there were obvious abnormalities in cell-mediated immunity in addition to those in humoral immunity in myasthenia gravis. These abnormalities tended to be normalized after Tx or GC therapy.     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

Evaluation of absorption and emission cross sections of Er-dopedLiNbO3 for application to integrated optic amplifiers

The polarization-dependent absorption and emission spectra of the ⁴I_13/2-⁴I_15/2 transition (λ~1.5 μm) in single crystal bulk Er:LiNbO₃ have been measured. Low-temperature (10 K) measurements of the Stark split energy levels of these two manifolds indicate at least two Er³⁺ sites. McCumber theory is applied to determine the Er:LiNbO₃ absorption and emission cross sections. These values are used to calculate the gain characteristics of Er:LiNbO₃ channel waveguides. Calculations indicate that a gain of 10 dB is achievable in a waveguide of several centimeters using ~20-mW pump power     

我国压铸行业及压铸机制造业的情况介绍

压力铸造（简称压铸）是金属成型技术中的一种。由于压铸生产技术的生产效率高、产品质量好、经济效益好，因此，用压铸方法生产出的零件（即压铸件）得到广泛的应用，遍及各个工业领域。其中，汽车和摩托车等交通工具作为支柱产业成为压铸零件的最大用户。航空、航天、兵器、电子等工业都是压铸零件的重要用户；还有五金、灯具、玩具、家电、电动及风动工具等行业也都大量地加以采用。     

Purification and renaturation of recombinant human lymphotoxin (tumour necrosis factor beta) expressed in Escherichia coli as inclusion bodies

High level expression of recombinant human tumour necrosis factor β (rh TNF-β) in Escherichia coli results in the formation of two portions of protein, namely soluble active protein and insoluble protein which is inactive and aggregates in the form of inclusion bodies (IBs). In this study, a procedure for purification and renaturation of rh TNF-β from inclusion bodies has been designed and verified experimentally with a product purity of more than 90% and a recovery of about 30%. The procedure includes washing of IBs with specific wash buffer (Triton X-100/EDTA/lysozyme/PMSF), their solubilization with 8 mol dm^?3 alkaline urea, purification with ion-exchange columns, refolding with renaturation buffer and finally concentration and desalination with an ultrafiltration membrane. The characteristics of the renatured protein were identical with those of purified protein from the soluble fraction as demonstrated by (1) SDS-PAGE, (2) cytotoxic activity on mouse L929 cells, (3) N-terminal amino acid sequence, and (4) gel filtration chromatography.     

TEM method for rapid and precise evaluation of continuous recrystallization

With the aid of a double-tilt holder in a transmission electron microscope, a new method for a rapid and precise determination of the misorientations of a large number of subgrain or grain boundaries is given in this article. By use of the method, the continuous recrystallization can be rapidly and precisely evaluated when compared to the other conventional methods.     

A solenoid-derived wiggler

A novel wiggler design for use in free-electron lasers (FELs) is proposed, consisting of a staggered array of magnetic poles situated inside the bore of a solenoid. The resultant field pattern consists of a periodic transverse magnetic field on axis, as well as a longitudinal guide field. Such a wiggler has several advantages: the longitudinal field acts to confine the electrons near the FEL axis, high fields can be attained at short wiggler periods, the field strength is easily varied, and fabrication and testing of the wiggler are relatively easy. It is planned to use this wiggler design in a far infrared FEL to be built at Stanford University     

Variational principle of combined energy—Mechanics of laminated structures

The conventional approaches for stress analysis of composite laminates have encountered discontinuity problems. In this paper, the C¹ continuity of displacements in the in-plane directions and C⁰ continuity of displacement along the thickness direction are discussed. Also, the global continuity of transverse stresses and local continuity of in-plane stresses are examined. Then, the formulations of stress analysis in both differential equation form and variational functional form are presented.     

Two-level optimal output feedback stabilizer design

Design of two-level system stabilizers is considered using an optimal reduced-order model whose state variables are torque angles and speeds. The reduced-order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of the electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interaction. The effectiveness of this controller is evaluated, and an example, the multimachine system, is given to illustrate the advantages of the proposed method. The responses of the system with the two-level scheme and optimal reduced order scheme are included for comparative analyses