The synthesis and properties of new epoxy resin containing phosphorus and nitrogen groups for flame retardancy

A new type of epoxy resin, which contained phosphorus oxide and nitrogen groups in the main chain, was synthesized. The structure of the new type of epoxy resin was confirmed by infrared (IR) spectroscopy, ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C‐NMR spectroscopic techniques. In addition, compositions of the new synthesized epoxy resin (TGDMO) with three curing agents, for example, bis(3‐aminophenyl) methylphosphine oxide (BAMP), 4,4′‐diaminodiphenylmethane (DDM), and 4,4′‐diaminodiphenylsulfone (DDS), were used for making a comparison of its curing reactivity, heat, and flame retardancy with that of Epon 828 and DEN 438. The reactivities were measured by differential scanning calorimetry (DSC). Through the evaluation of thermal gravimetric analysis (TGA), those polymers which were obtained through the curing reactions between the new epoxy resin and three curing agents (BAMP, DDM, and DDS) also demonstrated excellent thermal properties as well as a high char yield. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 413–421, 1999     

一种用于岩石材料微裂纹观察的复型技术

介绍了一种用于岩石材料微裂纹观察的复型技术。这种半透明的试样表面复型可有效复制宽度大于0.2μm的微观裂纹以及矿物颗粒的微结构特征，并可方便地用于光学显微镜和扫描电镜下观察。它的最大特点是不仅能精确复制岩样的表面裂纹，同时还能提供足够多的信息以鉴别矿物颗粒。应用表明：对于岩石材料的微破裂研究，特别对于矿物颗粒的破坏行为与岩石破坏的关系研究，它是一种方便而有效的方法。     

岩爆模拟材料的筛选试验研究

根据岩爆模拟试验的要求,进行了相似材料的配合比试验,筛选出若干适合作为岩爆模型的相似材料。试验过程中就试验设备、材料配合比、模型制作、典型试验等方面进行了有益的探讨。     

Attenuation compensation for cardiac single-photon emission computed tomographic imaging: Part 1. Impact of attenuation and methods of estimating attenuation maps

Attenuation is believed to be one of the major causes of false-positive cardiac single-photon emission computed tomographic (SPECT) perfusion images. This article reviews the physics of attenuation, the artifacts produced by attenuation, and the need for scatter correction in combination with attenuation correction. The review continues with a comparison of the various configurations for transmission imaging that could be used to estimate patient specific attenuation maps, and an overview of how these are being developed for use on multiheaded SPECT systems, including discussions of truncation, noise, and spatial resolution of the estimated attenuation maps. Ways of estimating patient specific attenuation maps besides transmission imaging are also discussed.     

Detection of lead in water using laser-induced breakdown spectroscopy and laser-induced fluorescence

Laser-induced breakdown spectroscopy (LIBS) is a well-known technique for fast, stand-off, and nondestructive analysis of the elemental composition of a sample. We have been investigating micro-LIBS for the past few years and demonstrating its application to microanalysis of surfaces. Recently, we have integrated micro-LIBS with laser-induced fluorescence (LIF), and this combination, laser ablation laser-induced fluorescence (LA-LIF), allows one to achieve much higher sensitivity than traditional LIBS. In this study, we use a 170 microJ laser pulse to ablate a liquid sample in order to measure the lead content. The plasma created was re-excited by a 10 microJ laser pulse tuned to one of the lead resonant lines. Upon optimization, the 3sigma limit of detection was found to be 35 +/- 7 ppb, which is close to the EPA standard for the level of lead allowed in drinking water.     

A graphical method for determining the in-plane rotation angle in geometric calibration of circular cone-beam CT systems

It is well known that seven parameters completely describe a circular cone-beam geometry in either flat-panel X-ray computed tomography (CT) or single pinhole SPECT imaging. This paper considers the problem of determining one of the seven parameters only, the detector in-plane rotation or twist angle η. We describe a graphical procedure that can determine η independently of all other six parameters from a geometric calibration scan of point objects. Our method is exact in the ideal noise-free case and is general in that the other two out-of-plane detector rotation angles θ and φ can be nonzero. The calibration scan typically needs at least two point objects and an even number of projection views over a full 360° data acquisition. Under certain conditions, projection data truncation or a short scan acquisition of 180° + fan angle can be accommodated without affecting the accuracy of the calibration result. The graphical method is equally applicable to rotational multipinhole SPECT geometry. In this case, the final result is averaged from the individual estimates considering each pinhole separately. We use computer simulations and a multipinhole SPECT experiment to demonstrate the accuracy and precision of the proposed method.