Single-molecule devices: materials,structures and characteristics

This review article provides a brief survey of materials, structures and current state-of-the-art techniques used to measure the charge conduction characteristics of single molecules. Single molecules have been found to exhibit several unique functionalities including rectification, negative differential resistance and electrical bistable switching, all of which are necessary building blocks for the development and configuration of molecular devices into circuits. Conjugated organic molecules have received considerable interest for their low fabrication cost, three dimensional stacking and mechanical flexibility. Furthermore, the ability of molecules to self-assemble into well-defined structures is imperative for the fabrication of molecule based circuits. The theoretical formalisms are presented for studying single-molecule Coulomb blockade effects, ballistic transport in a molecular chain and electromagnetic coupling between a surface-plasmon field and a single molecule. Moreover, the experimental current–voltage results are discussed using basic principles of carrier transport mechanisms.     

Alginate-Coated Alginate-Polyethyleneimine Beads for Prolonged Release of Furosemide in Simulated Intestinal Fluid

Furosemide-loaded calcium alginate (ALG), calcium alginate-polyethyleneimine (ALG-PEI) and alginate-coated ALG-PEI (ALG-PEI-ALG) beads were prepared by ionotropic/polyelectrolyte complexation method to achieve controlled release of the drug. Effects of several formulation factors on the characteristics of the beads were investigated. Although variation in formulation factors did not influence the drug-loading efficiency (DLE) of ALG beads, rapid release of the drug in simulated intestinal fluid (SIF) could not be prevented. PEI treatment of ALG beads, however, prolonged the drug release considerably. Ionic interaction, as appeared from FTIR studies, between alginate and PEI led to the formation of polyelectrolyte complex membrane, the thickness of which was dependent on the conditions of PEI treatment as demonstrated by scanning electron microscopy (SEM). The membrane acted as a physical barrier to drug release from ALG-PEI beads. Alginate coating of ALG-PEI beads further prolonged the release of the drug by increasing membrane thickness and reducing swelling of the beads possibly by blocking the surface pores. Differential scanning calorimetry (DSC) study indicated that drug was not degraded by PEI treatment. The release data from ALG-PEI beads showed a good fit in power law expression, whereas the release data from ALG-PEI-ALG beads were found to fit in modified power law expression, and the mechanism of drug release changed from super case II transport to nearly Fickian transport, depending on the degree of gelation and formation of polyelectrolyte complex membrane.     

Evaluation of pH-sensitivity and drug release characteristics of (polyacrylamide-grafted-xanthan)-carboxymethyl cellulose-based pH-sensitive interpenetrating network hydrogel beads

Novel pH-sensitive interpenetrating network hydrogel beads of polyacrylamide-grafted-xanthan (PAAm-g-XG) and sodium carboxymethyl cellulose (NaCMC) loaded with ketoprofen were prepared and evaluated for pH sensitivity and drug release characteristics. The pH-sensitive PAAm-g-XG copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The grafting and alkaline hydrolysis reactions were confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and X-ray diffraction studies were carried out to know the crystalline nature of encapsulated drug. Scanning electron microscopic study revealed that the interpenetrating polymer network (IPN) beads possess porous matrix structure in alkaline pH whereas nonporous matrix structure was observed in acidic pH. The swelling of the beads and drug release was significantly increased when pH of the medium was changed from acidic to alkaline. The results of pulsatile swelling study indicated that the IPN beads changed their swelling behavior when pH of the external medium was altered. As pH of the medium was changed from 1.2 to 7.4, a considerable increase in swelling was observed for all the beads. However, swelling process was slower than the deswelling. At higher pH values, the carboxyl functional groups of hydrogels undergo ionization and the osmotic pressure inside the beads increases resulting in higher swelling. Drug release followed case II transport mechanism in acidic medium whereas anomalous/non-Fickian transport mechanism was observed in alkaline medium.     

Nanostructured organic-inorganic photodiodes with high rectification ratio

High quality organic-inorganic heterojunction photodiodes based on nanostructured copper (II) phthalocyanine (CuPc) and intrinsic zinc oxide (i-ZnO) have been fabricated. The i-ZnO thin films/layers were grown by RF magnetron sputtering on clean indium tin oxide (ITO) coated glass substrates. These films have been characterized by optical absorption and field emission scanning electron microscopy (FESEM). CuPc thin films deposited at room temperature on i-ZnO have exhibited a change in their surface morphology with the post-deposition annealing temperature under normal atmosphere. The electrical dark conductivity and the photoconductivity of ITO/i-ZnO/CuPc/Au sandwich structures have been measured under various photoexcitation intensities using a xenon light source. The devices have shown excellent reproducibility of their electrical characteristics and high rectification ratios. The highest rectification ratio is nearly 831 calculated above the threshold voltage at room temperature for the sample annealed at 250?°C (i.e.?Pc 250). The effects of the annealing temperature of CuPc on the surface morphology, rectification ratio, and optical properties have been discussed.     

Effect of Temperature on Hydraulic Parameters of Cable-In-Conduit-Conductor of SST-1

Stable operation of superconducting magnets depend critically on the balance of heat deposition rate versus heat extraction rate by the cryo-coolant. Thus, the mass flow rate of the coolant in case of force-flow cooled superconducting magnet with Cable-In-Co-nduit-Conductor (CICC) construction becomes an important factor for optimum stability of magnets. The Toroidal and Poloidal Field magnets of Steady-state Superconducting Tokamak-1 (SST-1) is made of superconducting CICC with a void fraction of 40 %±2 %. For adequate cooling of magnets, supercritical helium at 4 bar and 4.5 K is forced-flown through the voids. Effect of temperature on mass flow rate and pressure drop in SST-1 CICC is studied in a 7 m long piece wound helically. The experimental friction factor of the CICC is also measured at different temperatures and flow rates and is compared with the standard Katheder equation and Tada equation. Also, based on the new findings obtained from the experimental results, the dimensionless Reynolds number has been slightly modified. This new number is used to propose a modified Katheder correlation for the friction factor in CICCs similar to that of SST-1.     

A semantic geo-catalogue for a local administration

The enhancement of the search capabilities of geo-spatial tools occupies one of the highest positions in the agenda of the INSPIRE initiative. This can be done by equipping applications with tools able to understand user terminology. However, this is in contrast with current approaches, which tend to fix in advance the terminology with a consequent rigidity in the way users interact with the system. In this paper we present the work we have done with the Semantic Geo-Catalogue (SGC) project in providing a semantic extension to the geo-catalogue of the Autonomous Province of Trento (PAT) in Italy. This was done through the adoption of a semantic matching tool and a faceted ontology that codifies knowledge about the geography of the PAT and that was created by reorganizing data extracted from the local geographical dataset. Thanks to the semantic extension, queries to the geo-catalogue are expanded with domain specific terms taken from the ontology thus obtaining a higher number of relevant documents in output. We also complied with the Open Government Data (OGD) initiative by publishing in RDF and by linking to relevant dictionaries some useful data taken from the local repository.     

Development and machinability evaluation of MgO doped Y-ZTA ceramic inserts for high-speed machining of steel

ABSTRACT

In current high productivity manufacturing era, it is necessary to develop non-conventional newer tool materials. Here, an attempt has been made for developing MgO doped zirconia-toughened alumina (Mg-ZTA) using powder metallurgy process route. The 3 mol% yttria stabilized zirconia (YSZ) (10 wt%), alumina (Al₂O₃) (90 wt%) with varying percentage of magnesium oxide (MgO) (0–1 wt%) are mixed to study the phase transformation and uniaxially pressed into square inserts with 0.8 mm nose radius and sintered at 1,600ºC for 1 h in pressure less condition. The maximum hardness of 17.04 GPa, fracture toughness of 5.09 MPa m^1/2 and flexural strength of 502 MPa, respectively, has been reached at 0.6 wt% of MgO due to more metastable tetragonal phase. The performance of the insert has been evaluated by machining AISI 4340 steel (radius 75 mm) in lathe. The performance with respect to flank wear, cutting force and surface roughness is quite impressive at different cutting speed even after 20 min of machining. It can be inferred that MgO doped ZTA insert can be used for medium to high-speed machining in current manufacturing scenario and is very promising to replace carbide or coated carbide inserts in coming days.     

Investigation of organic n-type field-effect transistor performance on the polymeric gate dielectrics

We report a copper hexadecafluorophthalocyanine (F₁₆CuPc) based n-type organic field-effect transistor (OFET) with polymeric gate dielectrics with different physical/electrical properties. The gate dielectrics are four types of cross-linked poly(4-vinylphenol) and newly prepared poly(4-phenoxy methyl styrene) and those are characterized based on surface tension, leakage current and capacitance. The performance of F₁₆CuPc OFETs with those gate dielectrics was compared. We found that the composition of the gate dielectrics and the interfacial interaction of F₁₆CuPc with the gate dielectric play a decisive role in the performance of OFETs. The effect of physical/electrical properties, composition and processing condition of the gate dielectrics on the device performance was investigated.