微铬含量CO中温变换催化剂本征动力学的研究

微铬含量ＣＯ中温变换催化剂本征动力学的研究崔波，赵素芳，刘鹏照，宋世英，张洪全（青岛化工学院化学工程系，青岛２６６０４２）关键词：催化剂，一氧化碳变换反应，铁催化剂，动力学１前言一氧化碳变换反应是化学工业中制氢的重要反应，长期以来所用的一氧比碳中变催...     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.     

Synthesis and characterization of novel,temperature‐sensitive microgels based on N‐isopropylacrylamide and tert‐butyl acrylate

A series of temperature‐sensitive microgels based on N‐isopropylacrylamide as the main monomer, tert‐butyl acrylate (tBA) as the comonomer, and N,N′‐methylene‐bis(acrylamide) as the crosslinker were synthesized with a modified surfactant‐free emulsion polymerization method. The chemical structure and global shape with an excellent monodispersity of the microgels were confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The temperature‐sensitive behavior of the microgels was investigated by dynamic light scattering and ultraviolet–visible spectrophotometric analysis. The results show that the volume phase‐transition temperature of the poly(N‐isopropylacrylamide‐co‐tert‐butyl acrylate) [poly(NIPAM‐co‐tBA)] microgels were tuned over a broad range by the incorporated amount of tBA comonomer and their temperature sensitivity decreased with increasing content of tBA units incorporated into the microgel network. Furthermore, the swelling ratios of the poly (NIPAM‐co‐tBA) microgels were lowered gradually with increasing tBA unit content within the microgel network. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2962–2967, 2007     

基于MVB的协议一致性测试系统设计

针对不同生产厂家的多功能车辆总线(Multifunction Vehicle Bus,MVB)设备存在兼容性和互操作性适应度差的问题,设计了基于MVB的协议一致性测试系统,给出了系统的总体结构、软硬件设计与实现方案,并构建测试集优化模型。测试系统的测试电路接口模块包括物理层接口模块和链路层接口模块两部分,负责将采集的MVB总线上的数据传递给控制与测试模块进行分析和处理。控制与测试模块软件部分着重设计了测试用例集优化模型,并采用高效的商业求解器CPLEX进行有效求解,提高了测试效率。实际运行结果表明:该测试系统是稳定并且高效的,可应用于不同MVB设备的协议一致性测试。     

PTC型BaTiO3陶瓷的孪晶和孪晶界

用透射电镜和高分辨电镜观察研究了PTC型BaTiO_3陶瓷的孪晶和孪晶界结构,并提出了可能的{111}孪晶及孪晶界的原子结构模型。结果表明,{111}孪晶形成氧八面体共面的共格倾斜孪晶界,在孪晶界处可能存在一定量的A空位且原子密度要低于孪晶体内。同时还发现两种其它特征的孪晶现象。     

熔融插层法制备聚合物复合材料的研究进展

对近年来熔融插层法制备聚合物复合材料的研究进展进行了综述。从动力学、热力学方面对插层结果进行了分析，总结了影响插层效果的因索；并归纳出插层以后复合材料性质的改善，最后展望了熔融插层法制备聚合物／粘土纳米复合材料。     

Oxidation of Butane to Maleic Anhydride using Vanadium Phosphate Catalysts: Comparison of Operation in Aerobic and Anaerobic Conditions using a Gas-gas Periodic Flow Reactor

The use of a periodic flow reactor is described for the oxidation of butane to maleic anhydride to compare the catalytic performance of vanadium phosphate catalysts operating under aerobic and anaerobic conditions. It is found that for the catalyst prepared via a standard VPO method, operation in the absence of oxygen leads to a very small enhancement in selectivity when butane concentrations in the range 0.9–2.9% are used. Operation in the absence of oxygen leads to very small differences in conversion such that the overall yield is enhanced and this effect is maximised for reactor feeds containing 1.5% butane. However, the enhancement is negligible when the catalyst is operated at high conversion required for commercial operation, indicating that reactors operating with continuous flow with aerobic conditions are preferred. Similar experiments are conducted for a catalyst prepared by the VPD method and, in contrast, this catalyst gives lower butane conversion and maleic anhydride selectivity when operated in the absence of oxygen.     

Advanced underfill for high thermal reliability

The key to the success of flip‐chip technology lies in the availability of sucessful underfill materials. However, the reliability of flip‐chip technology using current underfill materials is generally found to be lower than that of conventional wire‐bond connection packaging materials such as epoxy molding compound (EMC) because of the high coefficients of thermal expansion (CTE) and moisture absorption of cured underfill material. In this study desbimide (DBMI), which has a low melting point (about 80°C), was used in the underfill materials as a cohardener. As a result, DBMI‐added underfill can show excellent thermal reliability, which is due to the superior properties of the CTE, the elastic modulus, and water resistance. When the properties of a 2 wt % DBMI‐added underfill were compared with those of a typical underfill (epoxy/anhydride), the CTE value was reduced to less than one‐half at the solder reflow temperature (about 200°C), the elastic modulus was reduced to less than one‐half in the temperature region below the glass‐transition temperature, and the water resistance was improved twofold. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2617–2624, 2002     

激光引信抗干扰技术分析

针对激光引信易受云雾、烟尘干扰的特点,利用云雾、烟尘及模拟阳光产生装置,设计了一组激光引信干扰实验。模拟激光引信与目标交会过程中云雾、烟尘及阳光等对激光引信的干扰,并根据实验数据,分析了云雾、烟尘及阳光对激光引信的干扰机理和特征,提出了抗阳光、云雾等干扰的措施。     

Melting,crystallization behaviors,and nonisothermal crystallization kinetics of PET/PTT/PBT ternary blends

The melting, crystallization behaviors, and nonisothermal crystallization kinetics of the ternary blends composed of poly(ethylene terephthalate), poly(trimethylene terephthalate) (PTT) and poly(buthylene terephthalate) (PBT) were studied with differential scanning calorimeter (DSC). PBT content in all ternary blends was settled invariably to be one‐third, which improved the melt‐crystallization temperature of the ternary blends. All of the blend compositions in amorphous state were miscible as evidenced by a single, composition‐dependent glass transition temperature (T_g) observed in DSC curves. DSC melting thermograms of different blends showed different multiple melting and crystallization peaks because of their various polymer contents. During melt‐crystallization process, three components in blends crystallized simultaneously to form mixed crystals or separated crystals depending upon their content ratio. The Avrami equation modified by Jeziorny and the Ozawa theory were employed to describe the nonisothermal crystallization process of two selected ternary blends. The results spoke that the Avrami equation was successful in describing the nonisothermal crystallization process of the ternary blends. The values of the t_1/2 and the parameters Z_c showed that the crystallization rate of the ternary blends with more poly(ethylene terephthalate) content was faster than that with the lesser one at a given cooling rate. The crystal morphology of the five ternary blends investigated by polarized optical microscopy (POM) showed different size and distortional Maltese crosses or light spots when the PTT or poly(ethylene terephthalate) component varied, suggesting that the more the PTT content, the larger crystallites formed in ternary blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007