均布压力作用下厚壁圆管弯矩计算方法的探讨

建立了厚壁圆管弯矩计算公式，通过分析的均布压力作用下厚壁圆管与薄壁圆管压力相对误差，给出了厚壁圆管与薄壁圆管分类原则，了解和掌握这一原则对工程师大有禅益。     

旋风燃烧器冷态模型内颗粒运动轨迹计算

在冷态模型流场内，考虑气流对粉煤颗粒的气动阻力，建立其运动微分方程式。通过计算，得到九种粒径的颗粒在流场中的运动轨迹、停留时间、着膜位置和气－固相相对速度与该燃烧器几何参数和气动参数的关系，为燃烧器的深入研究提出了建议。     

自动加矾控制系统设计和运行

介绍了自动加矾控制系统在厦门安兜水厂的应用情况和运行处理效果     

FeSiB薄膜的巨磁阻抗和应力阻抗效应研究

软磁材料中存在巨磁阻抗 (giantmagneto impedance ,GMI)效应以及与之相同来源的应力阻抗 (stress impedance ,SI)效应 ,利用这两种效应可以制成具有高灵敏度的微型化的磁场和应力 应变传感器。本文基于传感器的实际应用 ,对图形化的、较大磁致伸缩的FeSiB单层和多层薄膜的巨磁阻抗和应力阻抗效应中频率和退火的影响进行了研究。结果表明 ,对于两种效应 ,经过退火处理的单层和多层膜均可在较低的频率下得到较高的灵敏度 ,而多层膜中的应力阻抗效应将为新型高灵敏传感器的设计和研制开辟一条崭新的途径     

Failure analysis and wear mechanism study of a heavily loaded gear

Failure analysis and a study of the wear mechanism were performed on a heavily loaded carburized gear with some unusual features. The analysis showed that the different failure forms on the tooth surface of the gear were dependent on the sub-surface shearing stress, the lubrication conditions and the surface roughness. Delaminations formed on the addendum surface were the main reason for the gear failure. A suggestion for improvement has been tried, and a desirable result has been obtained.     

深基坑重力式沙袋堆叠挡土工程的实践

本文介绍了湛江金辉煌综合楼工程的深基坑应用沙袋堆叠作挡土结构的设计与施工     

The effect of the EAAEAE insert on the property of human metallothionein-3

MT3 shows apparently different properties and function fromMT1 even though they have 70% sequence homology. Possibly thetwo inserts, Thr5 and a negatively charged hexapeptide at position-55in MT3, play important roles. A series of MT3 variants aroundthe EAAEAE hexapeptide have been prepared by site-directed mutagenesisand their properties and reactivity towards pH, EDTA and DTNBhave been studied. Our detailed studies revealed that the EAAEAEinsert is essential to the property of MT3. It is the hexapeptideinsert, to some extent, making the MT3     

加强和改进纪检监察工作的几点做法

加强和改进纪检监察工作，必须强化教育，落实党风廉政建设责任制；完善制度，建立有效的监督制约机制：正风肃纪，严肃查处违纪违法案件；围绕中心，开展效能监察工作；维护稳定，构建企业和谐稳定环境。     

丙烯酰胺-二甲基二烯丙基氯化铵反相微乳液体系的制备及表征

采用石油醚为连续相、失水山梨糖醇酐单油酸酯(Span80)和聚氧乙烯失水山梨醇单硬脂酸酯(Tween80)为复合乳化剂、正己醇为助乳化剂,建立了丙烯酰胺(AM)和二甲基二烯丙基氯化铵(DMDAAC)反相微乳液体系。使用Zeta电位/粒度/相对分子质量分析仪对该体系的形成及聚合过程中乳胶粒子粒径及其分布进行了测试。实验结果表明,当体系达到微乳液状态时,体系主要由10~100nm的单体微珠及少量粒径小于10nm的胶束组成;随聚合过程的进行,胶束消失,乳胶粒子体积增大。乳胶粒子体积的增大主要是通过扩散和碰撞两种机理完成的。最佳的复合乳化剂亲水-亲油平衡值为8.045,复合乳化剂在油相中的质量分数为33%,助乳化剂在油相中的质量分数为1.6%。在此条件下达到微乳液状态时的水相增容体积最大。     

Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying

Subalpine fir (Abies lasiocarpa Hook) lumber containing wetpockets (wetwood) was used for the measurements of gas permeability and the results were then compared to the gas permeability of normal wood, which was free of the wetpockets. The impacts of pretreatment methods were also investigated, including steaming at green condition, steaming at fiber saturation point (FSP), microwave treatment, and radio-frequency treatment. Results from this study demonstrated that both the transverse and the longitudinal gas permeability of subalpine fir wetwood are greater than that of normal wood. There is no significant change in the permeability after 4-h steaming pretreatment at green condition and at FSP. The impacts of microwave and radio-frequency pretreatments were not significant, but the findings cannot be generalized because they may depend on the power intensity applied.