Application of mid-infrared spectroscopy: measuring hydrogen peroxide concentrations in bleaching baths

The presented work applies mid-infrared attenuated total reflection (ATR) spectroscopy to the measurment of hydrogen peroxide in aqueous matrices. The performance of different ATR crystals mounted in flow cells was investigated in the presence of aqueous hydrogen peroxide solutions. Quantitative determination has been achieved by evaluation of specific OH stretching and deformation vibrations with linear correlation between peak areas or peak heights and hydrogen peroxide concentration in the range of 1-10% (weight in water). Important aspects such as chemical stability of the waveguide material and influences of pH and ionic strength on the performance are discussed. Feasibility for the investigation of real world samples is demonstrated by measuring industrial bleaching solutions with known concentrations of hydrogen peroxide fitting well with calibration graphs established with neat hydrogen peroxide solutions. The presented sensor system is capable of determining hydrogen peroxide within complex matrices and clearly corroborates the potential of providing an in situ measurement concept for on-line hydrogen peroxide detection.     

Low complexity adaptive power and subcarrier allocation for OFDMA

The problem of low complexity sub-optimal power and subcarrier allocation for OFDMA systems is addressed in the paper. We propose a heuristic non-iterative method that is an extension of the ordered subcarrier selection algorithm recently proposed for a single user case to the OFDMA systems. The suggested method improves the average BER-performance of the system and it also provides fairness between the users in terms of the bit rates. Both the theoretical analysis and simulation results confirm efficiency of the proposed technique. Based on the proven lemma about inversion of power gains, we strengthen the suggested method by low complexity power loading that consists in equalization of the received signal-to-noise ratios of each user     

NICE h : a higher-order explicit numerical scheme for integration of constitutive models in plasticity

The article introduces, as a result of further development of the first-order scheme NICE, a simple and efficient higher-order explicit numerical scheme for the integration of a system of ordinary differential equations which is constrained by an algebraic condition (DAE). The scheme is based on the truncated Taylor expansion of the constraint equation with order h of the scheme being determined by the highest exponent in the truncated Taylor series. The integration scheme thus conceived will be named NICE ^h , considering both principal premises of its construction. In conjunction with a direct solution technique used to solve the boundary value problem, the NICE ^h scheme is very convenient for integrating constitutive models in plasticity. The plasticity models are defined mostly by a system of algebraic and differential equations in which the yield criterion represents the constraint condition. To study the properties of the new integration scheme, which, like the forward-Euler scheme, is characterised by its implementation simplicity due to the explicitness of its formulations, a damage constitutive model (Gurson–Tvergaard–Needleman model) is considered. The general opinion that the implicit backward-Euler scheme is much more accurate than the thus-far known explicit schemes is challenged by the introduction of the NICE ^h scheme. The accuracy of the higher-order explicit scheme in the studied cases is significantly higher than the accuracy of the classical backward-Euler scheme, if we compare them under the condition of a similar CPU time consumption.     

Stochastic volatility models with leverage and heavy-tailed distributions: A Bayesian approach using scale mixtures

This paper studies a heavy-tailed stochastic volatility (SV) model with leverage effect, where a bivariate Student-t distribution is used to model the error innovations of the return and volatility equations. Choy et al. (2008) studied this model by expressing the bivariate Student-t distribution as a scale mixture of bivariate normal distributions. We propose an alternative formulation by first deriving a conditional Student-t distribution for the return and a marginal Student-t distribution for the log-volatility and then express these two Student-t distributions as a scale mixture of normal (SMN) distributions. Our approach separates the sources of outliers and allows for distinguishing between outliers generated by the return process or by the volatility process, and hence is an improvement over the approach of Choy et al. (2008). In addition, it allows an efficient model implementation using the WinBUGS software. A simulation study is conducted to assess the performance of the proposed approach and its comparison with the approach by Choy et al. (2008). In the empirical study, daily exchange rate returns of the Australian dollar to various currencies and daily stock market index returns of various international stock markets are analysed. Model comparison relies on the Deviance Information Criterion and convergence diagnostic is monitored by Geweke’s convergence test.     

Prospects for the use of high-Tc superconductors in fusion magnets and options for their test in SULTAN

In the last few years, the critical current densities of long commercially available REBa₂Cu₃O_7?x (RE-123, where RE represents Y or a rare earth element) coated conductors have reached values of 250 A/cm-width at 77 K and zero applied field. Even higher values of 600 A/cm-w (77 K, B = 0) have been demonstrated in shorter lengths. The attractive features of the use of these high-T_c superconductors (HTS) are operation temperatures above 20 K and/or magnetic fields higher than those envisaged for the ITER TF coils. Possible operation conditions for HTS fusion magnets have been studied taking into consideration the possible further improvements of RE-123 coated conductors. Investigations of stability and quench behavior indicate that stability is not a problem, whereas quench detection and protection need attention. Because of the high currents necessary for fusion magnets, many tapes need to be assembled into a transposed conductor. The qualification of HTS conductors for fusion magnets would require their test at magnetic fields of 11 T and currents well above 10 kA. The possibilities to test straight HTS conductor samples in SULTAN have been considered. For a test at 4.5 K, only the development of a low resistance joint between the HTS conductor under test and the NbTi transformer of SULTAN would be necessary. Tests up to 20 K would require that the HTS sample is connected with the NbTi transformer by a conduction-cooled HTS bus bar of large thermal resistance similar to the HTS module of a current lead. HTS conductor tests at temperatures around 50 K would be possible with modified cryogenics.     

Low through channel loss wavelength multiplexer using multiple transmission volume Bragg gratings

We describe a wavelength multiplexer design that employs multiple transmission volume Bragg gratings written in the same region of a photosensitive glass having a through channel loss of < 0.5 dB. A two-channel multiplexer for wavelengths of lambda = 1310 and 1550 nm is demonstrated to test our design methods and assumptions. Agreement between simulation and experiment is within 0.2 dB at the peak diffraction efficiency. Grating apodization is used to reduce the interchannel cross talk from (13.5 +/- 0.5) to (41.5 +/- 8.5) dB, with an experimental through channel loss of (0.6 +/- 0.2) dB. Effects of angular dispersion on diffraction efficiency and grating spectral shape due to the finite diameter of the incident reading beam are also analyzed.     

Overcoming Anode Instability in Solid-State Batteries through Control of the Lithium Metal Microstructure

Enabling the lithium metal anode (LMA) in solid-state batteries (SSBs) is the key to developing high energy density battery technologies. However, maintaining a stable electrode–electrolyte interface presents a critical challenge to high cycling rate and prolonged cycle life. One such issue is the interfacial pore formation in LMA during stripping. To overcome this, either higher stack pressure or binary lithium alloy anodes are used. Herein, it is shown that fine-grained (d = 20 µm) polycrystalline LMA can avoid pore formation by exploiting the microstructural dependence of the creep rates. In a symmetric cell set-up, i.e., LiǀLi_6.25Al_0.25La₃Zr₂O₁₂(LLZO)ǀLi, fine-grained LMA achieves > 11.0 mAh cm⁻² compared to ≈ 3.6 mAh cm⁻² for coarse-grained LMA (d = 295 µm) at 0.1 mA cm⁻² and at moderate stress of 2.0 MPa. Smaller diffusion lengths (≈ 20 µm) and higher diffusivity pathway along dislocations (D_d ≈ 10⁻⁷ cm² s⁻¹), generated during cell fabrication, result in enhanced viscoplastic deformation in fine-grained polycrystalline LMA. The electrochemical performances corroborate well with estimated creep rates. Thus, microstructural control of LMA can significantly reduce the required stack pressure during stripping. These results are particularly relevant for “anode-free” SSBs wherein both the microstructure and the mechanical state of the lithium are critical parameters.