Moment-method analysis of large, axially symmetric reflectorantennas using entire-domain functions

The moment-method technique utilizing entire domain basis functions is applied to the analysis of large, axially symmetric reflector antennas. The electric surface current is modeled as a finite series of sinusoids whose domain consists of the entire generating curve. This expansion results in a matrix size of less than 5% of that produced with subdomain basis functions. Only a slight increase in the CPU requirements occurs from this analysis. The results from this technique show good agreement when compared to both physical optics and a subdomain-based moment-method formulation on small, axially fed paraboloidal and hyperboloidal reflector antennas. Extension to a large 100-λ paraboloidal reflector with f/D=0.4 produces results comparable to that obtained using physical optics. Convergence is obtained with as few as two expansion terms per wavelength. Discretization of the generating curve with four points per wavelength leads to results which agree within 0.5 dB over data from a more densely defined curve     

Electrical and optical feedback in an InGaAs/InP light-amplifyingoptical switch (LAOS)

A circuit model for optical and electrical feedback has been developed to investigate the cause of negative differential resistance (NDR) switching in a series connected heterojunction phototransistor (HPT) light-emitting diode (LED) device. The model considers optical feedback from the light generated in the LED, electrical feedback from the holes thermally emitted over the LED cladding layer, nonlinear gain of the HPT, the Early effect, and leakage resistance. The analysis shows that either electrical or optical feedback can be the dominant cause for the NDR, depending upon their relative strengths. The NDR observed in the devices was caused primarily by electrical feedback since the optical feedback is weak. For low input power, avalanche breakdown appears to initiate the NDR in the devices although avalanching alone cannot cause NDR     

Atomic ion frequency standards

The history and status of trapped-ion frequency standards are reviewed. In a trapped-ion frequency standard, the frequency of an oscillator is servoed to a resonance which corresponds to a transition between two energy levels of an atomic ion. The ions are suspended in space by a combination of electric and magnetic fields. In a conventional rubidium cell, the atoms are surrounded by a buffer gas having a pressure of about 10³ Pa (approximately 10 torr). In an ion trap, the ions are held either in a vacuum or in a low-pressure buffer gas (less than 10^-3 Pa). In an atomic beam, the atoms also move through a vacuum, without collisions. However, the time available for interaction with the electromagnetic field is limited to their flight time through the apparatus, usually about 10 ms or less. Trapped ions can be observed for much longer periods. Consequently clocks based on ions trapped in electromagnetic fields portend orders-of-magnitude improvement in the development of new frequency standards. Prospects for future standards are discussed     

Low-power digital radio as a ubiquitous subscriber loop

The recent growth in the use of digital radio is reviewed. The technology used to implement low-power digital radio in the local exchange loop plant is discussed. The integration of digital radio subscriber loops withnetwork intelligence is explored. The relationship between low-power digital radio loops and broadband fiber loops is briefly examined, and standards and frequency allocation activities are summarized     

Design aspects of MOS-controlled thyristor elements: technology,simulation, and experimental results

2.5-kV thyristor devices have been fabricated with integrated MOS controlled n⁺-emitter shorts and a bipolar turn-on gate using a p-channel DMOS technology. Square-cell geometries with pitch variations ranging from 15 to 30 μm were implemented in one- and two-dimensional arrays with up to 20000 units. The impact of the cell pitch on the turn-off performance and the on-state voltage was studied for arrays with constant cathode area as well as for single-cell structures. By realizing MOS components with submicrometer channel lengths, scaled single cells are shown to turn off with current densities of several kiloamperes per square centimeter at a gate bias of 5 V. In the case of multi-cell ensembles, turn-off performance is limited due to inhomogeneous current distribution. Critical process parameters as well as the device behavior were optimized through multidimensional numerical simulation     

Quantification of 5α-Cholestane-3β,5,6β-triol and Other Cholesterol Oxidation Products in Fast Food French Fried Potatoes

Concerns about toxicity of cholesterol oxidation products (COPS) prompted this study. Two restaurants were selected which use animal-vegetable (A/V) shortening for deep-frying. The survey of COPS for 30 days indicated values for total COPS in French fried potatoes were 20 ± 9 ppm to 24 ± 6 ppm. 5α-Cholestane-3β,5,6β-triol (triol) was identified in French fried potatoes from one restaurant. The mean for triol was 9 ± 3 ppm. Triol, 7α-hydroxycholesterol, 7β-hydroxy-cholesterol and 7-ketocholesterol were confirmed by co-chromatography and mass spectrometry. Triol is one of the most potent of angiotoxic COPS. This and other studies suggested French fried potatoes and other deep fried foods cooked in A/V shortening are a major source of COPS.     

Accidents,often the result of an ‘uncontrolled business process’—a study in the (Dutch) chemical industry

Often companies in the (petro‐) chemical industry claim that all possible countermeasures against potential accidents have been taken and therefore accidents are unforeseeable. In this paper we question this statement by analysing the pre‐warning signals (precursors) preceding a number of industrial accidents. 17 accidents that occurred in the (petro‐) chemical industry have been investigated by exploring FACTS, an accident database containing information about industrial accidents worldwide. This paper will demonstrate that the existence of precursor information could have been used to foresee and even prevent these accidents if a proper control action had been initiated. The accidents are analysed further, according to a control model, which was adapted from that of C. Argyris. It demonstrates the ineffectiveness of several elements of business process control loops and that the so‐called ‘double‐loop learning’ cycle is more important than the ‘single‐loop learning’ cycle if one considers safety improvement. Copyright © 2003 John Wiley & Sons, Ltd.     

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

High-performance, two-dimensional arrays of parallel-addressed InGaN blue micro-light-emitting diodes (LEDs) with individual element diameters of 8, 12, and 20 /spl mu/m, respectively, and overall dimensions 490 /spl times/490 /spl mu/m, have been fabricated. In order to overcome the difficulty of interconnecting multiple device elements with sufficient step-height coverage for contact metallization, a novel scheme involving the etching of sloped-sidewalls has been developed. The devices have current-voltage (I-V) characteristics approaching those of broad-area reference LEDs fabricated from the same wafer, and give comparable (3-mW) light output in the forward direction to the reference LEDs, despite much lower active area. The external efficiencies of the micro-LED arrays improve as the dimensions of the individual elements are scaled down. This is attributed to scattering at the etched sidewalls of in-plane propagating photons into the forward direction.     

Service Load Effective Compression Flange Width in Fiber Reinforced Polymer Deck Systems Acting Compositely with Steel Stringers

This paper reports on the field study of a steel stringer-fiber reinforced polymer (FRP) deck composite bridge in Pennsylvania. The objective of the study is to assess the effective compression flange width in the FRP deck and floor systems when they act compositely with underlying steel girders at service conditions. The research results reported herein support the notion of employing a design approach, for both interior and exterior girders of a composite floor system, that is philosophically consistent with current practice related to steel girders acting compositely with concrete decking. It appears from the results presented herein that FRP decks and floors acting compositely with underlying steel girders exhibit an effective width that is close to the actual girder spacing for interior beams, and approximately one-half this value for exterior beams.