The effect of hydrogen on the mechanical properties of FeTi for hydrogen storage applications

In this paper, the density functional theory (DFT) within the generalized gradient approximation (GGA) was used. The single crystal elastic constants for the intermetallic FeTi and its hydrides FeTiH and FeTiH₂ are successfully obtained from the stress–strain relationship calculations and the strain energy-strain curves calculations, respectively. The shear modulus, Young's modulus, Poisson's ratio and shear anisotropic factors are also calculated. The bulk moduli derived from the elastic constants calculations of the cubic FeTi, orthorhombic P222₁ FeTiH and Cmmm FeTiH₂ are calculated. For cubic FeTi compound, the bulk modulus is in a good agreement with both theoretical results and experimental data available in the literature. More importantly, it is found that, the insertion of hydrogen into the FeTi crystal structure causes an increase in the bulk modulus. From the analysis of shear-to-bulk modulus ratio, it is found that FeTi compound and its hydrides are ductile and that this ductibility, changes with changing the concentration of hydrogen.     

A phase-locked loop using ESO-based loop filter for grid-connected converter:performance analysis

An extended state observer(ESO)-based loop filter is designed for the phase-locked loop(PLL)involved in a disturbed grid-connected converter(GcC).This ESO-based...     

Validation of a 3D numerical model of shape memory alloys pseudoelasticity through tensile and bulging tests on CuAlBe sheets

In order to validate a 3D numerical model of the pseudoelastic behaviour of shape memory alloys (SMA) allowing a finite-strain analysis, a set of experimental tests is proposed. First consisting in determining the representative elementary volume (REV) model parameters, tensile tests are performed within a small perturbations context. Therefore, two kinds of structure tests representing different stress states are performed: tensile tests on CuAlBe perforated strips on the one hand and bulging tests on CuAlBe sheets on the other hand. With the update of the material parameters for a finite-strain analysis, it is then possible to compare the experimental and the numerical results obtained from tests on structures submitted to general states of stresses. Besides, pictures correlation and infrared thermography analysis have been used and combined to pinpoint the thermomechanical couplings of SMA behaviour.     

Asymptotic Distortion Performance of Source-Channel Diversity over Multihop and Relay Channels

A key challenge in the design of real-time wireless multimedia systems is the presence of fading coupled with strict delay constraints. A very effective answer to this problem is the use of diversity achieving techniques to overcome the fading nature of the wireless channels caused by the mobility of the nodes. The mobility of the nodes gives rise to the need of cooperation among the nodes to enhance the system performance. This paper focuses on comparing systems that exhibit diversity of three forms: source coding diversity, channel coding diversity, and user cooperation diversity implemented through multihop or relay channels with amplify-and-forward or decode-and-forward protocols. Commonly used in multimedia communications, performance is measured in terms of the distortion exponent, which measures the rate of decay of the end-to-end distortion at asymptotically high signal-to-noise ratio (SNR). For the case of repetition coding at the relay nodes, we prove that having more relays is not always beneficial. For the general case of having a large number of relays that can help the source using repetition coding, the optimum number of relay nodes that maximizes the distortion exponent is determined in this paper. This optimum number of relay nodes will depend on the system bandwidth as well as the channel quality. The derived result shows a trade-off between the quality (resolution) of the source encoder and the amount of cooperation (number of relay nodes). Also, the performances of the channel coding diversity-based scheme and the source coding diversity-based scheme are compared. The results show that for both relay and multihop channels, channel coding diversity provides the best performance, followed by the source coding diversity.     

Optimization of energy-constrained wireless powered communication networks with heterogeneous nodes

In this paper, we generalize conventional time division multiple access (TDMA) wireless networks to a new type of wireless networks coined generalized wireless powered communication networks (g-WPCNs). Our prime objective is to optimize the design of g-WPCNs where nodes are equipped with radio frequency (RF) energy harvesting circuitries along with constant energy supplies. This constitutes an important step towards a generalized optimization framework for more realistic systems, beyond prior studies where nodes are solely powered by the inherently limited RF energy harvesting. Towards this objective, we formulate two optimization problems with different objective functions, namely, maximizing the sum throughput and maximizing the minimum throughput (maxmin) to address fairness. First, we study the sum throughput maximization problem, investigate its complexity and solve it efficiently using an algorithm based on alternating optimization approach. Afterwards, we shift our attention to the maxmin optimization problem to improve the fairness limitations associated with the sum throughput maximization problem. The proposed problem is generalized, compared to prior work, as it seemlessly lends itself to prior formulations in the literature as special cases representing extreme scenarios, namely, conventional TDMA wireless networks (no RF energy harvesting) and standard WPCNs, with only RF energy harvesting nodes. In addition, the generalized formulation encompasses a scenario of practical interest we introduce, namely, WPCNs with two types of nodes (with and without RF energy harvesting capability) where legacy nodes without RF energy harvesting can be utilized to enhance the system sum throughput, even beyond WPCNs with all RF energy harvesting nodes studied earlier in the literature. We establish the convexity of all formulated problems which opens room for efficient solution using standard techniques. Our numerical results show that conventional TDMA wireless networks and WPCNs with only RF energy harvesting nodes are considered as lower bounds on the performance of the generalized problem setting in terms of the maximum sum throughput and maxmin throughput. Moreover, the results reveal valuable insights and throughput-fairness trade-offs unique to our new problem setting.

     

Single machine scheduling with delivery dates and cumulative payoffs

We address a single machine scheduling problem with a new optimization criterion and unequal release dates. This new criterion results from a practical situation in the domain of book digitization. Given a set of job-independent delivery dates, the goal is to maximize the cumulative number of jobs processed before each delivery date. We establish the complexity of the general problem. In addition, we discuss some polynomial cases and provide a pseudopolynomial time algorithm for the two-delivery-dates problem based on dynamic programming and some dominance properties. Experimental results are also reported.     

Structural,elastic, optoelectronic and magnetic properties of $$\mathbf{CdHo }_\mathbf{2}{} \mathbf{S}_\mathbf{4}$$ spinel: a first-principle study

We report the results of the full-potential linearized augmented plane wave (FP-LAPW) calculations on the structural, elastic, optoelectronic and magnetic properties of \(\hbox {CdHo}_{2}\hbox {S}_{4}\) spinel. Both the generalized gradient approximation (GGA) and Trans-Blaha modified Becke-Johnson potential (TB-mBJ) are used to model the exchange-correlation effects. The computed lattice parameter, internal coordinate and bulk modulus are in good agreement with the existing experimental data. According to the calculated elastic moduli, \(\hbox {CdHo}_{2}\hbox {S}_{4}\) is mechanically stable with a ductile nature and a noticeable elastic anisotropy. The ferromagnetic phase of \(\hbox {CdHo}_{2}\hbox {S}_{4}\) is energetically favourable compared to non-magnetic one, with a high magnetic moment of about 8.15 \(\upmu _{\mathrm{B}}\). The calculated band structure demonstrates that the title compound is a direct band gap semiconductor. The TB-mBJ yields a band gap of \(\sim \)1.86 and \(\sim \)2.17 eV for the minority and majority spins, respectively. The calculated optical spectra reveal a strong response in the energy range between the visible light and the extreme UV regions.     

The role of drying methods on enzymatic activity and phenolics content of impregnated dried apple

Infusion of antioxidants into vegetables is a new food strategy managed by matrix processing. Raw and blanched apple were air- or freeze-dried. In the case of freeze-dried samples, different freezing methods were previously applied: conventional (?28°C), blast freezing (?30°C), and liquid N₂ (?196°C). Afterwards, air- and freeze-dried samples at different conditions were impregnated with a concentrated (40°Brix) tea extract and finally, air-dried for their stabilization. Total phenolic content (TPC), antioxidant capacity (AC), enzymatic activity, and microstructure were analyzed. Regardless of pretreatments, the impregnation and the further drying improved the antioxidant potential. Samples with the most porous microstructure free of degradative enzymes provided high AC (78.5?±?0.9?mg Trolox/g dried matter) and TPC (16.7?±?0.2?mg GAE/g dried matter).