Biomechanical response of the human foot when standing in a natural position while exposed to vertical vibration from 10–200 Hz

Exposure to foot-transmitted vibration (FTV) can lead to pain and numbness in the toes and feet, increased cold sensitivity, blanching in the toes, and joint pain. Prolonged exposure can result in a clinical diagnosis of vibration-induced white foot (VIWFt). Data on the biomechanical response of the feet to FTV is limited; therefore, this study seeks to identify resonant frequencies for different anatomical locations on the human foot, while standing in a natural position. A laser Doppler vibrometer was used to measure vertical (z-axis) vibration on 21 participants at 24 anatomical locations on the right foot during exposure to a sine sweep from 10–200?Hz with a peak vertical velocity of 30?mm/s. The most notable differences in the average peak frequency occur between the toes (range: 99–147?Hz), midfoot (range: 51–84?Hz) and ankle (range: 16–39?Hz).

Practitioner Summary: The biomechanical response of the human foot exposed to foot-transmitted vibration, when standing in a natural position, was measured for 21 participants. The foot does not respond uniformly; the toes, midfoot, and ankle regions need to be considered independently in future development of isolation strategies and protective measures.     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

Scintillation Properties of 6LiI(Eu) in Cryogenic Temperatures

We measured emission wavelength spectra, scintillation decay time and scintillation light yield of ⁶LiI(Eu) in the temperature range from 4.2?K to 300?K. We observed that the scintillation decay time was almost constant (1.3?μs) below 100?K. At 4.2?K the light yield was found to increase to 6 times higher than that at 300?K. The ⁶LiI(Eu) is expected to be utilized for spectroscopic measurement of fast neutrons by operating at 4.2?K.     

Effect of rheology and humic acids on the transport of environmental fluids: Potential implications for soil remediation revealed through microfluidics

This study investigated the potential effect of shear rheology and humic acids (HA) on the subsurface transport of polymeric fluids used for the remediation of contaminants. Polymeric fluids were prepared with guar, scleroglucan, and carboxymethyl cellulose (CMC). Guar fluids can be used to suspend reactive particles for contaminant degradation. Fluids prepared with 2.5 g/L of guar in water were viscous, and the crosslinker borax (1 g/L) made them viscoelastic. Microfluidics experiments showed that the increase in elasticity blocked the flow of guar in 350 μm channels. Guar, CMC, or scleroglucan fluids containing sodium thiosulfate can be used to trap toxic Cr(VI) in the subsurface and reduce it to harmless Cr(III). Trapping of Cr(VI) is achieved by the gelation of the fluids upon contact with chromium. Before mixing with chromium, HA did not affect the flow of CMC, guar, and scleroglucan in microfluidic channels. Quartz-crystal microbalance with dissipation monitoring experiments indicates that HA reduced sorption of guar onto silica, potentially promoting the transport of guar fluids in sandy aquifers. While HA slightly decreased the rate of gelation of CMC and scleroglucan upon contact with chromium, it did not affect the fast gelation rate of guar. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48465.     

Analysis of indoor particles and gases and their evolution with natural ventilation

The air composition and reactivity from outdoor and indoor mixing field campaign was conducted to investigate the impacts of natural ventilation (ie, window opening and closing) on indoor air quality. In this study, a thermal desorption aerosol gas chromatograph (TAG) obtained measurements of indoor particle‐ and gas‐phase semi‐ and intermediately volatile organic compounds both inside and outside a single‐family test home. Together with measurements from a suite of instruments, we use TAG data to evaluate changes in indoor particles and gases at three natural ventilation periods. Positive matrix factorization was performed on TAG and adsorbent tube data to explore five distinct chemical and physical processes occurring in the indoor environment. Outdoor‐to‐indoor transport is observed for sulfate, isoprene epoxydiols, polycyclic aromatic hydrocarbons, and heavy alkanes. Dilution of indoor species is observed for volatile, non‐reactive species including methylcyclohexane and decamethylcyclopentasiloxane. Window opening drives enhanced emissions of semi‐ and intermediately volatile species including TXIB, DEET, diethyl phthalate, and carvone from indoor surfaces. Formation via enhanced oxidation was observed for nonanal and 2‐decanone when outdoor oxidants entered the home. Finally, oxidative depletion of gas‐phase terpenes (eg, limonene and α‐pinene) was anticipated but not observed due to limited measurement resolution and dynamically changing conditions.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Comparison of single and joint effects of Zn and Cu in continuous flow and batch reactors

BACKGROUND: Microbial behavior in batch reactors may be different from that in continuous flow reactors, which is expected to affect microbial response to heavy metal exposure. Four parallel continuous flow reactors and batch growth tests were used to investigate the single and joint toxicity of Zn and Cu to Artrobacter sp. JM018. RESULTS: The results indicated that Cu is more toxic than Zn under all conditions. In the batch reactors, all Zn concentrations showed a stimulatory effect on microbial growth. However in the continuous system, 125 µmol L^?1 Zn exposure produced inhibition. In the case of mixed Zn and Cu exposures in the batch system, the presence of Zn reduced the severity of Cu inhibition, with a net impact of reduced growth in all cases, whereas in the continuous system microbial growth and substrate utilization rates sharply decreased and ceased. CONCLUSION: The results clearly showed that growth in batch reactors underestimated significantly the heavy metal inhibition, compared with the continuous system. Therefore, the results of batch reactor tests should not be used directly when heavy metal inhibition is to be interpreted for continuous flow systems. Copyright © 2011 Society of Chemical Industry     

Four-Parameter Hybrid–Bishop–Hill Model Applied to OFE Copper for the Evaluation of Elastic/Yield Limit

This study employs a novel stress-based Hybrid–Bishop–Hill yield model approach to evaluate the yield surface of oxygen-free electronic copper samples. The local yield surface is determined from three parameters of crystal orientation and one parameter of geometrically necessary dislocation (GND). All four local state variables can be rapidly determined by analysis of measured electron backscatter diffraction patterns. Estimates for the polycrystalline yield surface are obtained by standard averaging procedures. The shape of the yield surface is most influenced by the texture of the material, while the volume of the envelope scales with the average GND density. However, correlations between crystal orientation and GND content modify the yield surface shape and size. While correlations between GND density and crystal orientation are not strong for most copper samples, there are sufficient dependencies to demonstrate the benefits of the detailed four-parameter model. The four-parameter approach has potential for improving estimates of elastic-yield limit in all polycrystalline materials.     

Reading Through a Plan

Problem: Planners may read plans often, but the profession continues to view the interpretation of plan content as something that is either too obvious or too unimportant to require explicit discussion. Plans are seldom adequately interpreted. This is regrettable because plans contain a rich variety of content and meaning.

Purpose: This article calls for planners to “read through” plans, not just to grasp their essential ideas or the means of implementing those ideas, but also to perceive additional levels of meaning relating to a) a plan's place within a larger intellectual sphere, b) a plan's statement on the social and political values of the time, and c) a plan as a part of the history of the planning profession and the life of cities.

Methods: I propose a visual approach to plan reading descended from Panofsky's (1939 Panofsky, E. 1939. Studies in iconology: Humanistic themes in the art of the Renaissance, New York, NY: Harper and Row.  [Google Scholar]) theory of iconology and use this to examine three very different plans that describe different size cities (small, large, very large) during different periods over the past 80 years (the 1930s, 1960s, 2000s). I analyze three levels of meaning in each plan: its factual meaning, or “plain sense” (Mandelbaum, 1990 Mandelbaum, S. J. 1990. Reading plans. Journal of the American Planning Association, 56(3): 350–358. [Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]); its contextual meaning, or relation to political, social, economic, and physical conditions; and its temporal meaning, or setting within the scope of observations made by other plan readers in the perspective of elapsed time.

Results and conclusions: Factual readings show that information may be found in diverse aspects of a plan document, from seemingly superficial aspects like its cover to unarguably central elements such as recommendations. Factual readings depend on understanding the relationships among different elements, and reveal information about the plan and its framers that may not otherwise be readily apparent. Contextual readings show us that plan recommendations are as much a product of contemporary conditions and norms as they are of plan-specific “survey and diagnosis” (Nolen, 1936 Nolen, J. 1936. Comprehensive city plan for Dubuque, Iowa, Dubuque, IA: City Planning and Zoning Commission.  [Google Scholar]). This raises the question of whether plan quality is to be judged only in terms of skillful execution of concerns of the day or whether innovation is also important. Temporal readings reveal that plans and planning have changed dramatically over time, simultaneously confirming and questioning the conventional wisdom of planning history.

Takeaway for practice: Many planners read plans on a regular basis, and plans continue to constitute the major printed currency of the planning profession. Both plans and planning will benefit if planners become more discerning readers of the profession's principal idea vessels. Formal plan interpretation is rare, but each planner can become a better plan interpreter.

Research support: None.