Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials

Information on the mechanical properties and repairability of computer-aided design/computer-aided manufacturing (CAD/CAM) blocks is scarce. Five CAD/CAM blocks with similar indications were evaluated, including four resin nanoceramics, one polymer-infiltrated ceramic network (PICN), and one feldspathic ceramic. CAD/CAM blocks were sectioned into 4 mm × 1.2 mm × 13 mm bars for flexural strength (FS), and 4 mm thick blocks were prepared for elastic modulus (EM), nanohardness (NH), and microshear bond strength (µSBS) testing. FS of the CAD/CAM blocks was determined using a three-point bending test, whereas EM and NH values were measured using a nanoindenter. The reparability of the tested block materials was determined by the µSBS test. One-way ANOVA was conducted for FS, EM, NH, and µSBS followed by Tukey's pairwise comparison (α < 0.05). FS ranged from 115 to 207 MPa, EM from 8.21 to 44 GPa, NH from 0.76 to 7.24, and µSBS from 24.9 to 30.6 MPa. The findings of the present study revealed that resin nanoceramic blocks exhibited higher FS values than PICN and feldspathic ceramic, and they have acceptable mechanical properties for the fabrication of single-unit restorations according to the ISO 6872:2008. Furthermore, all CAD/CAM blocks tested can be successfully repaired regarding their recommended repair protocol.     

The Water-Soluble Peripheral Substituted Phthalocyanines as Corrosion Inhibitors for Copper in 0.1 N HCl: Gravimetric,Electrochemical, SEM-EDS,and Quantum Chemical Calculations

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition effects of water-soluble peripheral substituted cobalt, copper and zinc metallophthalocyanines (CoPc (1), CuPc (2) and...     

Towards occupant-centric simulation-aided building design: a case study

ABSTRACT

This paper aims at illustrating the importance of occupant modelling for decision-making during the building design process. It identifies the energy implications of conventional ways of modelling occupants for the design of office buildings. Furthermore, it presents a step towards bridging the gap between the research efforts and conventional practices within the field of building performance simulation (BPS) aided design. The paper first describes occupant-related assumptions that were made during the design process of a case study office building, obtained via stakeholder interviews. Then, the impact of these assumptions on the design decisions is examined through a simulation-based investigation. The stakeholder interviews revealed that professionals from each design discipline made significantly different assumptions about occupants. The simulation results showed that assumptions about occupants and their behaviour impacted predicted energy savings of some design decisions by a factor of five or more.     

Effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with Bioaggregate apical plugs

To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate.     

Architectural View of Flexible Aliphatic –OH Group Coordinated Hemi-Directed Pb(II)-Salen Coordination Polymer: Synthesis,Crystal Structure,Spectroscopic Insights,Supramolecular Topographies,and DFT Perspective

Journal of Inorganic and Organometallic Polymers and Materials - We serendipitously designed one novel 1D hetero-binuclear Zn(II)-Pb(II) coordination polymer, namely...     

Free radical crosslinking of unsaturated bacterial polyesters obtained from soybean oily acids

Summary Poly(-3-hydroxy alkanoate) containing unsaturated side chains, PHA-soybean, were produced by feeding Pseudomonas oleovorans with soybean oily acids obtained from soybean oil. Unsaturation of PHA-soybean were found to be 10 mol-% of unsaturated side chains. Main saturated part of the biopolymer was Poly(3-hydroxy octanoate) with minor hexanoate and decanoate units. PHA films were crosslinked via free radical mechanism by means of thermally or under UV irradiation in the presence of benzoyl peroxide, benzophenon, and /or ethylene glycol dimethacrylate (EGDM). Crosslinking yield of the PHA films were found to be from 81 to 93 wt.-% from the sol-gel analysis. Swelling properties of the crosslinked PHA films in chloroform and toluene were also studied. Mc values of crosslinked PHAs were also calculated using Flory-Rehner equation. The crosslinked biopolyester obtained by thermally at 60 °C with benzoyl peroxide indicated the highest crosslinking density. Glass transition temperatures (Tg) of crosslinked biopolyester samples were changed from −33 to −45 °C while that of PHA-soybean was −60 °C. Received: 16 June 2000/Revised version: 22 January 2001/Accepted: 20 May 2001