Magnetic shape memory alloys (MSMAs) have recently been developed into a new class of functional materials that are capable of magnetic‐field‐induced actuation, mechanical sensing, magnetic refrigeration, and energy harvesting. In the present work, the magnetic &!hyphen;field‐induced martensitic phase transformation (FIPT) in Ni45Mn36.5Co5In13.5 MSMA single crystals is characterized as a new actuation mechanism with potential to result in ultra‐high actuation work outputs. The effects of the applied magnetic field on the transformation temperatures, magnetization, and superelastic response are investigated. The magnetic work output of NiMnCoIn alloys is determined to be more than 1 MJ m?3 per Tesla, which is one order of magnitude higher than that of the most well‐known MSMAs, i.e., NiMnGa alloys. In addition, the work output of NiMnCoIn alloys is orientation independent, potentially surpassing the need for single crystals, and not limited by a saturation magnetic field, as opposed to NiMnGa MSMAs. Experimental and theoretical transformation strains and magnetostress levels are determined as a function of crystal orientation. It is found that [111]‐oriented crystals can demonstrate a magnetostress level of 140 MPa T?1 with 1.2% axial strain under compression. These field‐induced stress and strain levels are significantly higher than those from existing piezoelectric and magnetostrictive actuators. A thermodynamical framework is introduced to comprehend the magnetic energy contributions during FIPT. The present work reveals that the magnetic FIPT mechanism is promising for magnetic actuation applications and provides new opportunities for applications requiring high actuation work‐outputs with relatively large actuation frequencies. One potential issue is the requirement for relatively high critical magnetic fields and field intervals (1.5–3 T) for the onset of FIPT and for reversible FIPT, respectively. 相似文献
In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE. 相似文献
International Journal of Coal Science & Technology - The production cycle of open-cast coal mines generally includes drilling, blasting, loading, hauling and coal preparation activities.... 相似文献
This paper presents a new dynamic error compensation approach with novel data-based closed-loop tuning scheme to enhance tracking accuracy of machine tool feed-drives. Both servo dynamics and friction disturbance induced positioning errors are pre-compensated by modifying the reference trajectory. Velocity and acceleration profiles of reference trajectory are modulated to achieve perfect tracking. Reference position profile is modified based on the pre-sliding friction regime to eliminate quadrant glitches. Optimal error compensation is achieved by a digital trajectory pre-filter whose parameters are tuned automatically by making on-the-fly iterative adjustments. Effectiveness of proposed compensation approach is validated experimentally in multi-axis feed-drive systems. 相似文献
3D Concrete Printing (3DCP) is a rapidly expanding area in the field of architecture, engineering, and construction, but very limited research has quantitatively investigated its environmental impact. The existing Life Cycle Assessment (LCA) studies on 3DCP lack clearly defined functional units of comparison, especially considering load-bearing structures. This paper investigates the potential environmental benefits of 3DCP over conventional concrete construction for structural beams based on a cradle-to-grave comparative LCA. Unlike existing studies, this paper employs a recarbonation model to account for the carbon offsetting from the use-stage of 3DP concrete, which shows significant results. The assessment includes three-beam designs, each analyzed for both prefabrication and on-site construction scenarios. While currently, 3DCP has a generally higher environmental impact due to the larger quantity of cement employed in the process, the reduction of material through infill optimization for printed beams is a promising design principle to positively offset the environmental impacts in the construction sector. The paper draws recommendations for future research on material- and recarbonation-efficient 3DCP design for load-bearing structures, as well as on material development, e.g. integration of larger aggregates and low-clinker cement.
Nowadays, doped graphenes are attracting much interest in the field of Li‐ion batteries since it shows higher specific capacity than widely used graphite. However, synthesis methods of doped graphenes have secondary processes that requires much energy. In this study, in situ synthesis of N‐doped graphene powders by using of cyclic voltammetric method from starting a graphite rod in nitric acid solution has been discussed for the first time in the literature. The N‐including functional groups such as nitro groups, pyrrolic N, and pyridinic N have been selectively prepared as changing scanned potential ranges in cyclic voltammetry. The electrochemical performance as anode material in Li‐ion batteries has also been covered within this study. N‐doped graphene powders have been characterized by electrochemical, spectroscopic, and microscopic methods. According to the X‐ray photoelectron spectroscopy and Raman results, N‐doped graphene powders have approximately 16 to 18 graphene rings in their main structure. The electrochemical analysis of graphene powders synthesized at different potential ranges showed that the highest capacity was obtained 438 mAh/g after 10 cycles by using current density of 50 mA/g at N‐GP4. Furthermore, the sample having higher defect size shows better specific capacity. However, the more stable structure due to oxygen content and less defect size improves the rate capabilities, and thus, the results obtained at high current density indicated that the remaining capacity of N‐GP1 was higher than the others. 相似文献
Nowadays, with the increase in the amount of power generation related to renewable energy resources, the need for energy storage and management is raised. In this regard, the hydrogen energy plays a critical role in the development of renewable technologies. In view of the above, advanced controller design is presented in this paper to effectively perform load frequency control of islanded fuel cell microgrid based on the wind turbine, photovoltaic, fuel cell, electrolyzer, battery energy storage systems, and residential and commercial loads. The controller design is based on the determination of the controller parameters that the fuel cell microgrid system will provide the desired dynamic properties. In the proposed controller design, virtual gain and phase margin testers are added to provide the desired dynamic properties. The controller's stable parameter plane is determined with the help of the stability boundary locus method, taking into account time delay, gain, and phase margin. First, the accuracy of the stable parameter plane determined for the proposed controller design is demonstrated by means of time domain and eigenvalue analyzes. Finally, in order to show the performance of the advanced controller design and the success of the fuel cell as a backup generator, analysis studies have been carried out using actual data of solar and wind, and appropriate changes of load in studied microgrid. 相似文献
In this study, the impacts of non‐integer order controller on the stable parameter space of the microgrid (MG) frequency control system with fixed communication time delay are investigated and discussed with the help of the stability boundary locus (SBL) method. This study proposes a non‐integer order controller for the load frequency control (LFC) of the MG systems. To that end, the load frequency model of the MG is formulated and then the characteristic equations of this model are obtained. Then, with the help of this characteristic equation, the stable parameter space of the non‐integer controller is determined with regard to different time delay (τ ) and fractional integral order values (α ) using the SBL method. In order to show the accuracy of the obtained stable parameter space, time domain and generalized modified Mikhailov (GMM) criterion studies are carried out for different values of (τ ) and (α ). According to the results obtained, the areas of stable parameter space according to different α values and τ = 1.6 are calculated as 444.8860 for α = 0.4 , 342.9728 for α = 0.7 , 259.3578 for α = 1 , 216.2541 for α = 1.3 and 159.6826 for α = 1.6 . In addition, the areas of stable parameter space according to different τ values and α = 1.4 are calculated as 784.5222 for τ = 1 , 106.3219 for τ = 2 , 29.6959 for τ = 3 and 11.5946 for τ = 4 . Despite the extreme variability arising from nature of resources that make up the MG, the designed non integer order controller with the values selected within the stable parameter space stably carries out LFC control of the MG. 相似文献