Spatial gamut mapping algorithms for cross‐display color reproduction

Abstract— Owing to the fast developments of computer networks and color imaging technologies, there is a tendency towards remote proofing in the printing or textile industries. More cases such as cross‐display color matching will occur in the future information society. The problems of color mismatching we usually find in cross‐display devices have been widely discussed today. In this paper, to achieve equivalent color matching between a sRGB monitor and an Adobe RGB monitor, the spatial gamut mapping algorithm (SGMA), which introduces sigmoidal tone mapping, multi‐mapping paths, and unsharp mask (USM) operation into a sRGB color‐management system, is proposed. According to the designs of USM locations, this proposed SGMA can be further developed into pre‐USM, post‐USM, and double‐USM types. Besides, two critical image characteristics, edge map and color histogram, are investigated to establish the relationship between image content and SGMA. The psychophysical experimental results show that double‐USM SGMA obtains better color matching than the other spatial types.     

Image correction based on homography in stereoscopic projection display

Abstract— Stereoscopic and autostereoscopic projection‐display systems use projector arrays to present stereoscopic images, and each projector casts one parallax image of a stereoscopic scene. Because of the position shift of the projectors, the parallax images have geometric deformation, which influences the quality of the displayed stereoscopic images. In order to solve this problem, a method based on homography is proposed. The parallax images are pre‐transformed before they are projected, and then the stereoscopic images without geometric distortion can be obtained. An autostereoscopic projection‐display system is developed to present the images with and without calibration. Experimental results show that this method works effectively.     

A new vertical‐alignment LC mode with high‐transmittance and fast‐response‐time features

Abstract— A novel pixel design for vertical‐alignment LCDs with superior transmittance has been developed. The new liquid‐crystal mode, refered to as the hole‐induced vertical‐alignment mode (Hi‐VA), uses a via hole of an organic layer on a TFT substrate to achieve multi‐domain alignment. Compared to the conventional design, the Hi‐VA mode has a transmittance of up to 135% with a contrast ratio of 2000:1. Moreover, the new structure is free from ITO patterning or protrusion on the color‐filter side, which makes the fabrication process simple and low cost.     

A dual‐polarized cylindrical conformal array antenna suitable for unmanned aerial vehicles

A dual‐polarized X‐band conformal array antenna is presented for unmanned aerial vehicles with polarimetric radars/sensors. Starting from the planar structure, the array antenna consisted of sixteen 2 × 2 subarrays is conformal to the cylinders with various curvature radii to fit the payload box of the airborne vehicle. The return losses are almost constant even if the curvature radius changes. Measured radiation patterns are compared with various curvatures at the same frequencies. The array can be easily placed on the aircraft payload or fuselage due to its ultra thin thickness, ultra lightweight, and conformal structure, which has potential airborne applications in polarimetric radar surveillance, remote sensing, and wireless communications. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Adaptive predistortion using threshold decomposition‐based piecewise linear modeling

A new adaptive predistortion approach for nonlinear power amplifiers based on the piecewise linear (PWL) approximation of nonlinear functions is presented. The PWL model is obtained using threshold decomposition (TD) of the input‐output characteristics. The TD based PWL model is used to develop a baseband predistorter using both the direct and the indirect learning architectures. The proposed predistorter is proved to provide a better performance in suppressing nonlinear distortion than conventional polynomial predistorters and a reduced hardware complexity as compared to lookup table (LUT) approach. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Hilbert‐shaped complementary ring resonator and application to enhanced‐performance low pass filter with high selectivity

In this article, a novel single negative metamaterial (MTM) transmission line (TL) consisting of a Hilbert‐shaped complementary ring resonator (H‐CRR) on the ground plane is initially presented and studied in depth. Then based on the proposed MTM TL, a novel six‐section Hi‐Lo microstrip low‐pass filter (LPF) with a cut‐off frequency 2.5 GHz is developed, fabricated, and measured. Measurement results indicate that: by integrating H‐CRR, the selectivity has been significantly improved which is 77.3 dB/GHz due to the single negative permittivity; by etching a crown square on low‐impedance section, the bandwidth characterized by 20 dB return loss was obviously enhanced by 26.2% and the maximal sidelobe level of in‐band return loss was reduced from 22 to 24.6 dB. What' more, the developed LPF achieved a 36.3% size reduction with respect to its conventional counterpart. The design concept, which was confirmed by the measurement data, is of practical value and can be popularized in other microwave devices where high selectivity is requested. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Optimized element positions for prescribed radar cross section pattern of linear dipole arrays

Approximate closed‐form expression is derived for the scattering from dipole arrays based on the equivalent circuit theory. Then, a method is proposed for synthesis of dipole arrays to produce desired scattering pattern using genetic algorithm (GA). In the synthesis method, the element positions in an array are considered as the optimization parameter and the derived expression is used to evaluate the fitness function of GA. To assess the validity and efficiency of the proposed method, several linear dipole arrays are designed to obtain scattering pattern with low sidelobe level (SLL). A good agreement between the patterns calculated using the expression and simulated by FEKO validates the accuracy of the presented expression. In addition, the numerical results show that the maximum SLL of the scattering pattern is considerably reduced by optimization. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Global exponential synchronization of stochastic switching networks with time‐varying delay

This paper is concerned with the global exponential synchronization of stochastic delayed switching networks via hybrid control. The network under investigation is quite general to reflect the reality, where the network topology consists of r modes and switches from one mode to another according to a Markovian chain with known transition probability. Parameter uncertainties, time varying delay and stochastic disturbances are all taken into account in this study. Based on the Lyapunov functional method and stochastic analysis techniques, some new criteria for the global robust synchronization via hybrid control are established. Finally, one example with numerical simulation is given for illustration. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Localization algorithm using a virtual label for a mobile robot in indoor and outdoor environments

Scanning laser range sensors provide range data consisting of a set of point measurements. The laser sensor URG-04LX has a distance range of approximately 0.02–4 m and a scanning angle range of 240°. Usually, such an image range is acquired from one viewpoint by “moving” the laser beam using rotating mirrors/prisms. The orientation of the laser beam can easily be measured and converted into the coordinates of the image. This article conducts localization using virtual labels with data about distances in the environment obtained from 2D distance laser sensors. This method puts virtual labels on special features and points which are along the mobile robot’s path. The current location is calculated by combining the virtual label and the range image of the laser range finder.