A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO_4/graphite(LFP) and LiNiMnCoO_2/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.     

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

Russian Engineering Research - Polymer samples based on polydicyclopentadiene produced from Russian dicyclopentadiene are investigated by thermogravimetric analysis and differential scanning...     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

Sintering Behavior and Dielectric Properties of Ultra‐Low Temperature Fired Silver Molybdate Ceramics

Ag₂MoO₄ ceramic was prepared by using the solid‐state reaction method, which could be sintered at 450°C for 2 h, having a relative permittivity of 8.08, a Qf value of 17 000 GHz, and a temperature coefficient of resonance frequency about ?133 ppm/°C. Ag₂MoO₄ ceramic was chemically compatible with silver but reacted seriously with aluminum to form (Ag_0.5Al_0.5)MoO₄ during the sintering. The fitting of infrared spectra and the Shannon's additive rule were employed to study intrinsic dielectric behaviors of the ceramics at microwave region. Ionic displacive polarization and the electronic polarization contributed almost equally to the dielectric permittivity of the ceramic at microwave region. The Ag₂MoO₄ ceramics could be a good candidate for ultra‐low temperature co‐fired microwave devices.     

Modified Pechini Synthesis of Proton‐Conducting Ba(Ce,Ti)O3 and Comparative Studies of the Effects of Acceptors on its Structure,Stability, Sinterability,and Conductivity

The phase structure, chemical stability, sinterability, and electrical performance of the proton‐conducting Ba(Ce,Ti)O₃ solid solution with a series of acceptors M (M = In, Y, Sm) synthesized by a modified Pechini method were systematically investigated. The substitution of cerium with titanium was proved as an effective way to improve the stability of BaCeO₃. Especially for the BaCe_0.95Ti_0.05O_3?δ sample doped with In, no change in the phase was found even after treatment in the atmosphere containing both CO₂ and H₂O at 700°C for 10 h. Thanks to the highly sinteractive powders with particle size of ~100 nm, dense ceramics were easily acquired. Moreover, compared with the undoped BaCe_0.95Ti_0.05O₃ sample, In, Y, and Sm dopants further improved the sinterability of the solid solution. In particular, In played a role of sintering aid and led to the largest linear shrinkage of the ceramics. As to the electrical performance, the transport properties of the samples under various atmospheres were analyzed and compared. The impedance tests demonstrated the best electrical performance of the Y‐doped samples.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

Zein‐based ultrathin fibers containing ceramic nanofillers obtained by electrospinning. II. Mechanical properties,gas barrier,and sustained release capacity of biocide thymol in multilayer polylactide films

The combination of electrospinning technology and nanomaterials such as nanoclays can synergistically lead to novel materials with enhanced properties and functionalities for their usage in passive and active packaging applications. Part I of this work was focused on the development of ultrathin zein fibers containing nanoclays, which were oriented along the fiber axis and increased the thermal properties. Part II presents the use of the hybrid fibers as passive and active components in multilayer packaging structures. The hybrid fibers are incorporated in poly(lactic acid) films via a two‐step process: Electrospinning and compression molding. The composites thus produced presented improved mechanical and barrier properties than the unfilled material. The natural biocide extract thymol is then incorporated in the coating, and its sustained release properties are shown. The antimicrobial capacity of the hybrid fibers was also determined against foodborne bacteria. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40768.     

Social context cognition crowd‐sourcing and semi‐automatic parametrization

This paper presents a semi‐automatic method of parameterizing an existing social context cognition model. It discusses benefits of the social context cognition models for example in personality modeling and their key issue that is parametrization. It briefly introduces social context cognition model and describes a new method of its crowd‐sourcing‐based parametrization. Later, validation is provided, and ability to recreate social context cognition in the provided samples is presented with good generalization for the unknown cases. Finally, model's stability for the continuous stream of dynamic social context input data is shown. Presented system contributes to the believable agent modeling and social simulations by making much needed applications of social context cognition models easier by addressing the so far unsolved troublesome parametrization issues. Copyright © 2016 John Wiley & Sons, Ltd.     

混合溶剂芳脂比与特定温度下密度的关系

为提高生产效率、降低生产成本、快速判断混合溶剂芳脂比,研究了混合溶剂芳脂比与特定温度下密度的关系。实验结果表明,混合溶剂的芳脂比与其特定温度下的密度之间存在明显线性关系,且该线性关系对生产具有指导意义。