InGaN microring light-emitting diodes

The fabrication and performance of an InGaN light-emitting diode (LED) array based on a microring device geometry is reported. This design has been adopted in order to increase the surface area for light extraction and to minimize losses due to internal reflections and reabsorption. Electrical characteristics of these devices are similar to those of a conventional large-area LED, while the directed light extraction proves to be superior. In fact, these devices are found to be more efficient when operated at higher currents. This may be attributed to improved heat sinking due to the large surface area to volume ratio. The potential applications of these devices are also discussed.     

A transmit MIMO scheme with frequency domain pre-equalization for wireless frequency selective channels

In this paper, we introduce a transmit multiple-input multiple-output (MIMO) scheme with frequency domain pre-equalization for a multipath or frequency selective channel. In this scheme, MIMO processing in the frequency domain is performed at the transmitter or base station so that the receiver or mobile station only requires limited processing. This scheme provides high data rates and also inherits from the frequency domain equalization the property of relatively low complexity in severe multipath environments. The MIMO transmit processing is derived by minimizing the minimum mean square errors (MMSE), and expressions for the signal-to-interference-plus-noise ratio and error probability based on the Gaussian approximation of the interference term are provided. Some important associated issues, such as channel errors and computational complexity, are also investigated. Numerical simulations are also provided and these demonstrate the improved performance of our proposed scheme compared to other transmit MIMO schemes. In particular, they show that the proposed system can attain multipath or frequency diversity of the channel.     

A pre-BLAST-DFE technique for the downlink of frequency-selective fading MIMO channels

In this paper, we propose a pre-Bell Laboratories layered space-time (BLAST)-decision-feedback equalization technique for the downlink of frequency-selective fading multiple-input multiple-output (MIMO) channels to combat multiple-access interference (MAI) and intersymbol interference (ISI). In our technique, we perform MIMO pre-equalization and prelayered space-time processing at the transmitter or base station, with a simplified receiver at the mobile station that requires only limited signal processing. An important application is in the downlink, so that a simplified mobile station can be constructed. An expression for the signal-to-noise ratio (SNR) and error probability based on the Gaussian approximation of the output noise term is derived. Performance is investigated by analysis and simulation results. In particular, it is demonstrated that the diversity order of this technique is higher than that of the MIMO orthogonal frequency-division multiplexing (OFDM) with vertical (V)-BLAST and MIMO OFDM with linear transmit preprocessing. It is also noticed that this technique performs better at high SNR values.     

Passive alignment method of polymer PLC devices by using a hot embossing technique

A novel fabrication process using a hot embossing technique has been developed for micromechanical passive alignment of polymer planar lightwave circuit (PLC) devices. With only one step of embossing, single-mode waveguide straight channels and micropedestals for passive aligning are simultaneously defined on a polymer thin film with an accuracy of /spl plusmn/0.5 /spl mu/m. This process reduces the steps for fabricating alignment structures. A fabricated polymer PLC chip and fibers are combined on a v-grooved silicon optical bench (SiOB) in a flip-chip manner. The process provides a coupling loss as low as 0.67 dB per coupling face and a cost-effective packaging solution for various polymer PLC devices.     

Laterally coupled buried heterostructure high-Q ring resonators

All-buried InP-InGaAsP ring resonators laterally coupled to bus waveguides are demonstrated. The buried configurations offer a lower built-in refractive index step along the resonator periphery, which affords enhanced optical coupling coefficients between the waveguides and reduced scattering losses caused by the resonator sidewall imperfections. Very low optical intensity attenuations of 0.4 cm/sup -1/ and coupling-limited quality factors of greater than 10/sup 5/ are observed from 200-/spl mu/m-radii ring resonators. The measured spectral linewidth is as narrow as 0.0145 nm.     

Parasitic-aware RF circuit design and optimization

RF circuit synthesis techniques based on particle swarm optimization and adaptive simulated annealing with tunneling are described, and comparisons of parasitic-aware designs of an RF distributed amplifier and a nonlinear power amplifier are presented. Synthesized in 0.35-/spl mu/m digital CMOS using a single 3.3-V power supply, the designs provide an 8-dB gain and 8-GHz bandwidth for a four-stage distributed amplifier, and 1.2-W output power with 55% drain efficiency at 900 MHz for a three-stage power amplifier. A standard circuit simulator, HSPICE or SPECTRE, embedded in an optimization loop is used to evaluate cost functions. The proposed design and optimization methodology is computationally efficient and robust in searching complex multidimensional design spaces.     

Iris Recognition Using Wavelet Features

The traditional iris recognition systems require equal high quality human iris images. A cheap image acquisition system has difficulty in capturing equal high quality iris images. This paper describes a new feature representation method for iris recognition robust to noises. The disc-shaped iris image is first convolved with a low pass filter along the radial direction. Then, the radially smoothed iris image is decomposed in the angular direction using a one-dimensional continuous wavelet transform. Each decomposed one-dimensional waveform is approximated by an optimal piecewise linear curve connecting a small set of node points. The set of node points is used as a feature vector. The optimal approximation procedure reduces the feature vector size while maintaining recognition accuracy. The similarity between two iris images is measured by the normalized cross-correlation coefficients between optimal curves. The similarity between two iris images is estimated using mid-frequency bands. The rotation of one-dimensional signals due to the head tilt is estimated using the lowest frequency component. Experimentally we show the proposed method produces superb performance in iris recognition.     

GaInAsSb-AlGaAsSb tapered lasers emitting at 2.05 μm with 0.6-Wdiffraction-limited power

Tapered lasers fabricated from a GaInAsSb-AlGaAsSb single-quantum-well structure are reported. The laser structure, grown by molecular beam epitaxy, has broad-stripe pulsed threshold current densities as low as 50 A/cm² at room temperature. Tapered lasers have exhibited diffraction-limited continuous-wave output power up to 600 mW     

Power generation characteristics of a sandwich‐type self‐heating thermoelectric generator with spatially varying embedded heat source

Power generation characteristics of a sandwich‐type thermoelectric generator in which the heat source is embedded into thermoelectric elements are investigated. Our previous work on a similar concept only considered a uniform heat source distribution inside thermoelectric elements. In this work, the effect of the spatial distribution of a heat source is examined. In particular, the effect of the concentration of heat source near the one end, that is, the hot end, is intensively studied as a potential means of improving the efficiency of the device. Although the effects of heat source concentration in impractical cases without heat transfer limitations on the cold side remain ambiguous, it become clear that heat source concentration indeed has positive effects in more realistic cases with finite heat transfer coefficients imposed on the cold side. Because of the relatively low efficiency of typical thermoelectric generation, a significant amount of heat must be dissipated from the cold end of the thermoelectric element. Greater heat source concentration near the hot end leads to more effective utilization of available heat source, reduces the amount of heat rejected at the cold end, and lowers the hot end temperature of the thermoelectric element. Overall, it is suggested that heat source concentration can be used as a method to achieve more efficient operation and better structural integrity of the system. Copyright © 2015 John Wiley & Sons, Ltd.