Ultraviolet light inactivation of protozoa in drinking water: a Bayesian meta-analysis

To assess the dose of UV light needed to achieve specified levels of Giardia spp. cysts and Cryptosporidium spp. oocysts inactivation in drinking water, a Bayesian meta-analysis is used to analyze experimental data from several studies. Of the 20 studies identified by an extensive data collection effort, 14 (five reported experiments on Giardia and nine on Cryptosporidium) were selected for analysis based on a set of criteria. A substantial amount of the log inactivation data are reported as greater than a given inactivation level (i.e., censored data). The Bayesian hierarchical modeling approach used in this study not only properly addresses the common concerns in a meta-analysis but also provides a robust method for incorporating censored data. Different statistical models will result in different estimates of the UV doses needed to achieve a specific inactivation level. The Bayesian approach allows us to present the uncertainty in terms of risk, which is better suited for supporting US EPA in developing regulations.     

Stress-Strain State of Weak Saturated Clay Beds of Embankments

Results are presented for laboratory and field tests of weak saturated soils serving as beds for embankments in Ho Chi Min City and various regions of the Mekong River Delta (Vietnam). A method is outlined for quantitative evaluation of the stress-strain state (SSS) of the weak saturated clayey beds (plane problem). A method is described for quantitative evaluation of the deformation and stability of weak beds in the initial, intermediate, and stabilized stages of the formation and transformation of the SSS. __________ Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 2–6, September–October, 2005.     

Separation of physical loading from photosynthesis/respiration processes in rivers by mass balance

Diurnal variations in physical and chemical concentrations, including nutrients, are observed in river ecosystems. Understanding these cycles and separating the effects of physical loading (from point and non-point sources) and biogeochemical processes are necessary for water management and the TMDL process. A chloride mass balance approach is used to separate the relative influences of physical loading and biogeochemical processes in the Bow River through Calgary, Canada, which has a significant influence on the river water chemistry. Sampling campaigns were conducted in December 2005, when minimal photosynthesis and respiration occur, and in July 2006, when river discharge is high and some photosynthesis and respiration activity is present. Samples in each campaign were collected at point source input and output along the river reach through the city every hour for a 24-hour period, allowing for time of travel. The two wastewater treatment facilities within the city contributed the majority of physical mass loading to the river, with temporal variations in effluent discharge, chloride, and nutrient concentrations. Wastewater effluent chloride to nutrient (as well as other parameter relationships) concentrations also varied diurnally. An hourly chloride mass balance was achieved, within 0.5% (average, S.D.=4.4) for December and 7.7% (average, S.D.=4.2) for July, between estimated cumulative sum values from all inputs and measured values at the river output downgradient of the city, allowing for the investigation of other parameter conservativeness. Some slight diurnal variations associated with photosynthesis and respiration were observed even with limited productivity in the river. Nitrate mass fluxes appeared to be most strongly influenced by photosynthesis and respiration processes, with phosphate being less influenced. Ammonia mass fluxes appeared to be most strongly influenced by wastewater effluent loading. Physical loading can mask or enhance biogeochemical diurnal fluctuations, creating errors in river process interpretations. Chloride was a useful tracer in the mass balance to distinguish between and assist in separating physical loading and biogeochemical processes in the river.     

Chlorine disappearance in sea-water

A series of chlorination studies were carried out on natural and artificial sea-water. It was determined that both the forward and back titration procedures accurately described the two phases of chlorine losses in sea-water: a rapid initial loss followed by a continuous loss at a sharply reduced rate. The order of adding the iodide and buffer reagents was found to be crucial in affecting the rapid initial loss. The initial loss was found to reach a saturation level that varied widely between natural sea-water samples and appeared to be related to a true organic demand. In contrast, the second phase was difficult to explain. Losses continued over 10 day periods and were pronounced in both natural and artificial sea-water containing bromide. In the absence of bromide, long term losses in artificial sea-water were greatly reduced, indicating that the lost applied chlorine was associated with the bromine chemical system in sea-water. The fate of the lost chlorine was not determined and the untitratable halogen compounds must remain suspect as potential biocides.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

The effect of temperature on the removal of non-ionic surfactants during small-scale activated-sludge sewage treatment—I. Comparison of alcohol ethoxylates with a branched-chain alkyl phenol ethoxylate

The degree of biodegradability of three non-ionic surfactants has been assessed using small-scale activated-sludge sewage treatment plants. The effect of temperature on biodegradability was studied by operation at 15°, 11° and 8°C.The two alcohol ethoxylate surfactants tested were well degraded at all three operating temperatures. The alkyl phenol ethoxylate surfactant tested was well degraded at 15°C but at lower temperatures the biodegradability was dependent on concentration. At 5 mg 1⁻¹, greater than 90 per cent removal was achieved but at 20 mg 1⁻¹ the degree of removal fluctuated between 40 and 95 per cent at 11°C and between 20 and 80 per cent at 8°C.The present results have been compared with those obtained using the same surfactants in community trials at a small sewage works employing biological filtration. Although a similar temperature effect was observed with the alkyl phenol ethoxylate, the biodegradabilities obtained in the laboratory were consistently greater than those obtained at the sewage works, perhaps because of the constant conditions of the laboratory test.